« previous next »
Pages: [1]   Go Down

Author Topic: heavyweight slugs[>=320gr] in 45Colt Redhawk?  (Read 327 times)

0 Members and 1 Guest are viewing this topic.

Offline hansg/Ups

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 147
heavyweight slugs[>=320gr] in 45Colt Redhawk?
« on: October 19, 2012, 09:06:41 AM »
Anyone try heavy[320 or 340gr]cast bullets in 45Colt Redhawk?I'm thinking of a full wadcutter with gas check for <=60 yard bears,hogs.
Results?
Load data?
Thanks.
Logged

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: heavyweight slugs[>=320gr] in 45Colt Redhawk?
« Reply #1 on: October 20, 2012, 08:30:25 AM »
The heaviest I have shot was a 305g .458 that I sized down to .454 , those did shoot very well out to 50 yards , I'll have to look at my data to see what powder worked best though , I'm thinking it was either IMR 4227 or Win 296 / H 110 .
 
stimpy
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline ole 5 hole group

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 275
Re: heavyweight slugs[>=320gr] in 45Colt Redhawk?
« Reply #2 on: October 20, 2012, 09:46:04 AM »
335 cast with 22.5 grains H110 will get you 1,226fps and pretty good accuracy.  22 grains of IMR-4227 will get you 1,110fps with good accuracy.  Used WLP primers.
Best accuracy I've found with that bullet from my Redhawk was VV N110 - 18.0 grains of N110 got me 1,009fps and a tad under an inch at 25 yards rested for a 5-shot group, which was fairly repeatable from one range session to another.
Logged
Pages: [1]   Go Up
« previous next »