« previous next »
Pages: [1]   Go Down

Author Topic: Good idea/ Bad idea. .45/.410?  (Read 433 times)

0 Members and 1 Guest are viewing this topic.

Offline Mr BadWrench

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Good idea/ Bad idea. .45/.410?
« on: November 22, 2012, 04:28:33 PM »
 Reading information on chamber adapters for shooting .22 out of .223 at www.mcace.com I realized they require a "Simple plug with a firing pin" that extends the firing pin and adapts it to work with the rimfire round.

 Would it be possible to build a plug like this to allow firing .45acp out of this gun or a .45lc?



 You guys will eventually get used to my insomnia inspired rantings.

 Don
Logged

Offline Rustyinfla

  • GBO Supporter
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1744
Re: Good idea/ Bad idea. .45/.410?
« Reply #1 on: November 22, 2012, 08:36:43 PM »


    Someone that is a good lathe operator might say otherwise but I don't believe it would work because you wouldn't have enough wall thickness. I have a couple of the MCA .22lr/.223 adapters and they work as advertised but you're dealing with a thicker wall thickness there. I don't think it would have anything to do with the back end of the adapter. You would still want the primer to be contacted directly by the firing pin.
Logged
If you're gonna be stupid ya gotta be tuff

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Good idea/ Bad idea. .45/.410?
« Reply #2 on: November 23, 2012, 12:52:43 AM »
Bad Idea!  The bore diameter of a .410 is 0.410" give or take few thousands.  A 45LC or 45ACP bullet ranges from .451 to .454 so not good.  Also, no rifling so the bullet will be unstable.  Just buy a 45/410 barrel or gun as it has the proper bore ID and has rifling.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline michael30.06

  • Learner
  • Trade Count: (0)
  • Member
  • *
  • Posts: 79
  • Gender: Male
Re: Good idea/ Bad idea. .45/.410?
« Reply #3 on: November 23, 2012, 01:15:14 AM »
I agree with Bikerbeans, it's a good excuse for another rifle or another barrel at least.
Logged
Pages: [1]   Go Up
« previous next »