« previous next »
Pages: [1]   Go Down

Author Topic: Savage 311 question  (Read 625 times)

0 Members and 1 Guest are viewing this topic.

Offline Cuts Crooked

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3325
  • Gender: Male
Savage 311 question
« on: January 08, 2013, 06:58:43 PM »
I was recently given a Savage/Stevens 311 SxS in 16 gauge. I would like to restock it because the stock had  been modified. Brownells has walnut stocks for the 311 in 12 gauge. Can anyone tell me if the 16 Gauge uses the same aciton as the 12 Gauge? Or does it use the action for the 20 Gauge size?
Logged
Smokeless is only a passing fad!

"The liar who charms and disarms and wreaths himself in artifice is too agreeable to be called a demon. So we adopt the word "candidate"." Brooke McEldowney

"When a dog has bitten ten kids I have trouble believing he would make a good childs companion just because he now claims he is a good dog and doesn't bite. How's that for a "parable"?"....ME

Offline Bigeasy

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1986
  • Gender: Male
Re: Savage 311 question
« Reply #1 on: January 08, 2013, 10:41:28 PM »
Back in the 70's, I had a 311 in 16ga with a cracked stock.  A local gunsmith told me it was the same stock as the 12ga model.  Don't know for sure though, as I ended up selling it without replacing the stock.  Maybe check Gun Parts Corp?
 
Larry
Logged
Personal opinion is a good thing, and everyone is entitled to one.  The hard part is separating informed opinion from someone who is just blowing hot air....

Offline Cuts Crooked

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3325
  • Gender: Male
Re: Savage 311 question
« Reply #2 on: January 10, 2013, 10:41:00 AM »
Well.........what I am learning, is that the stocks and frames varied widely on the 311s. :-\ There were various sized frames, a "square frame" version and a "notched frame" version. There are also variations in tang length. Mine happens to be a notched frame.

It looks like I'm goin' to have to whittle a new stock, which I can do, but really don't have the time these dayz. I guess this one will have to go in the back of the safe until I retire someday. :(
Logged
Smokeless is only a passing fad!

"The liar who charms and disarms and wreaths himself in artifice is too agreeable to be called a demon. So we adopt the word "candidate"." Brooke McEldowney

"When a dog has bitten ten kids I have trouble believing he would make a good childs companion just because he now claims he is a good dog and doesn't bite. How's that for a "parable"?"....ME

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Savage 311 question
« Reply #3 on: January 10, 2013, 11:57:13 AM »
YES!!

There are a few different 311 frame's!!

I also have one in 16ga and its stock was cracked on both sides... I could also only find 12ga and I did not want to chance the fit so I fixed mine!!

I carefully clamped the stock into proper position. Then I drilled thru the wrist where it was cracked. I used 1/8'' hard wood dowels and epoxy. I slid the dowels in with epoxy all over them, with it still clamped together. It worked out just fine!!

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.
Pages: [1]   Go Up
« previous next »