« previous next »
Pages: [1]   Go Down

Author Topic: 17 Hornet  (Read 1392 times)

0 Members and 2 Guests are viewing this topic.

Offline SEK_22Hornet

  • GBO Supporter
  • Trade Count: (0)
  • Member
  • *****
  • Posts: 97
17 Hornet
« on: February 06, 2013, 07:39:01 AM »
Just a quick question to the group - I know a few have 17 Hornet barrels - anyone have any favorite loads for the 17 Hornet yet? I'm still working towards a barrel for my Handi, but have a savage and a CZ that I'm playing with right now....


Logged

Offline Sourdough

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 8150
  • Gender: Male
Re: 17 Hornet
« Reply #1 on: February 06, 2013, 09:06:58 AM »
I have always reloaded for everything I shoot in Centerfire.  I just bought a .17 Hornet a couple of months ago.  I am not going to reload for it, those little cases are just too small for my old fingers to handle.  I think Hornady can do a far better job than I can.
Logged
Where is old Joe when we really need him?  Alaska Independence    Calling Illegal Immigrants "Undocumented Aliens" is like calling Drug Dealers "Unlicensed Pharmacists"
What Is A Veteran?
A 'Veteran' -- whether active duty, discharged, retired, or reserve -- is someone who, at one point in his life, wrote a blank check made payable to 'The United States of America,' for an amount of 'up to, and including his life.' That is honor, and there are way too many people in this country today who no longer understand that fact.

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: 17 Hornet
« Reply #2 on: February 06, 2013, 11:53:22 PM »
I have one of the first made here. I dont use or shoot it that much. Its a very good shooter, but for me its a hunter. Its been out but hasnt spoken...yet. ;)

I have bought a few boxes of factory ammo as when I did it was the only thing avalible. I think I have 10-12 boxes or so... I was waiting for dies and havent bought them yet. I think I have two boxes of brass ready to load... Its gonna be a while till I ''need'' to reload it.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Sourdough

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 8150
  • Gender: Male
Re: 17 Hornet
« Reply #3 on: February 07, 2013, 06:56:41 AM »
Ever seen those videos where they shoot prarie dogs, and they explode?  One .17 Hornet + one Red Squirrell at 15 ft shot in the nose = Red Mist.  That little sucker ain't going to be ripping up the insulation in my Diesel Truck any more. 
Logged
Where is old Joe when we really need him?  Alaska Independence    Calling Illegal Immigrants "Undocumented Aliens" is like calling Drug Dealers "Unlicensed Pharmacists"
What Is A Veteran?
A 'Veteran' -- whether active duty, discharged, retired, or reserve -- is someone who, at one point in his life, wrote a blank check made payable to 'The United States of America,' for an amount of 'up to, and including his life.' That is honor, and there are way too many people in this country today who no longer understand that fact.

Offline hoytcanon

  • If there is a season for it... I have a pot to cook it in.
  • Trade Count: (9)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
  • Handi's and Henry's... a perfect partnership!
Re: 17 Hornet
« Reply #4 on: February 07, 2013, 12:51:43 PM »
I rechambered two 17 HMR's to 17H and loaded for them and shot them for two months... sold them at the range for a good price... that was after I decided that I VASTLY prefer out K-Hornets... with 35 and 40 V-Max. The loads I used for 17H were 9 grains of Lil Gin and 12.5 grains of H322... both loads were equal for velocity and accuracy out of our guns, pretty good accuracy, but not as good as the 40VM from the K-H's... I am glad I tried 17H... and I know that I don't miss them.
Logged
Hoyt Handi's; Ultra Black .22 K-Hornet Shorty, Black Synthetic K-Hornet Shorty & Nickel .410 Combo (sons), Ultra Granite Grey .22 BR Rem, Ultra Nutmeg .223 & .30/30 Shorty Combo (sons), Ultra Forest .223/7mm-08 Shorty Combo, Ultra Forest .243/.308 Combo, Ultra Nutmeg .243/.308 Combo (sons),  Jacaranda/Cocobolo .30/30 & 7.62X39 Shorty Combo, Ultra Black/Stainless .260 Rem Stub, Ultra Black/Stainless .338 Federal Stub,  Ultra Grey .358 Win, Ultra Grey .35 Whelen, Walnut/Cocobolo Mannlicher .357 MAX, Buffalo Classic Mannlicher .44 Mag Shorties w/NDS-38 peeps (X2; Sons & mine), Ultra Grey Stainless .45/70 & .243 & 20 Gauge Combo, Buffalo Classic 26" .45/70, 9.3X74R Mannlicher, Synthetic Nickel .410 & .30/30 & Versa Pak .22 LR Shorty Combo, Ultra Forest/Cocobolo 12 Gauge 3.5" Turkey; Most scoped with DNZ or Dura Sight one-piece bases and Mueller, Hawke or Nikon scopes... several with Skinner Peeps and Williams Fire Sight ramps.

Offline geezerbiker

  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 1884
  • Gender: Male
Re: 17 Hornet
« Reply #5 on: March 11, 2013, 12:44:55 PM »
I'm still a ways out from getting my .17 Hornet back from the gunsmith but I figured I'd start looking around for a couple boxes of ammo to get me started for when she comes home.  Everyone seems to be out of .17 Hornet with no back order.  It seems Hornady either didn't make enough or this round is more popular than they expected.  Hopefully I'll be able to find a box or 2 in the coming months...

Tony
Logged

Offline thesandman

  • GBO Supporter
  • Trade Count: (2)
  • Member
  • *****
  • Posts: 78
Re: 17 Hornet
« Reply #6 on: March 11, 2013, 04:25:39 PM »
Geezer2 to geezer1;  info in this months shooting tims on 17hornet and a small article on reloads for same.  good info on primers and he liked aa1680 x 12gr x rem 6 1/2 x 20gr vmax @ 3741mv.  smokin but you need 22in plus bbl length.  also a article on wsm in same mag.   good luck   ps SEK ck out old posts on 17ctrfires.  I think Stimpy has couple and a lady on forum also.  might pm them for their pet loads. 
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: 17 Hornet
« Reply #7 on: March 11, 2013, 04:37:55 PM »
Quote from: thesandman on March 11, 2013, 04:25:39 PM
Geezer2 to geezer1;  info in this months shooting tims on 17hornet and a small article on reloads for same.  good info on primers and he liked aa1680 x 12gr x rem 6 1/2 x 20gr vmax @ 3741mv.  smokin but you need 22in plus bbl length.  also a article on wsm in same mag.   good luck   ps SEK ck out old posts on 17ctrfires.  I think Stimpy has couple and a lady on forum also.  might pm them for their pet loads.

PM me if you would like the article I can scan and send to you if you like.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline jrabbit

  • GBO Supporter
  • Trade Count: (5)
  • Member
  • *****
  • Posts: 46
Re: 17 Hornet
« Reply #8 on: March 12, 2013, 01:21:29 PM »
Just got notice from Mid South Shooters supply that they had new stock in and I bought 5 boxes.  I don't think I can improve the accuracy of mine with hand loads as it will already out shoot me.  It consistantly shoots under an inch at 100 yards with the 20 grain Hornady ammo.
Logged

Offline Tractorsaw1

  • GBO Supporter
  • Trade Count: (16)
  • Avid Poster
  • *****
  • Posts: 218
  • Gender: Male
Re: 17 Hornet
« Reply #9 on: March 12, 2013, 01:47:49 PM »
Anyone try to have a 17HMR barrel fitted to a center fire reciever?  I would like to get one & ream it to hornet, but looking at the accessory barrel program looks like they won't do that & i don't have a rim fire reciever.  At the prices & lack of used on the market on barrels now makes the accessory program look a lot better.  Guess the 17hmr barrels will be even harder to get after the new winchester super mag gets more available.
Logged
We can skin a buck we can run a trot line & a country boy can survive

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 17 Hornet
« Reply #10 on: March 12, 2013, 01:50:31 PM »
H&R won't, you'll have to fit it yourself.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline slngblde

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 180
  • 3 miles north of Joe s
Re: 17 Hornet
« Reply #11 on: March 12, 2013, 01:57:00 PM »
Quote from: Tractorsaw1 on March 12, 2013, 01:47:49 PM
Anyone try to have a 17HMR barrel fitted to a center fire reciever?  I would like to get one & ream it to hornet, but looking at the accessory barrel program looks like they won't do that & i don't have a rim fire reciever.  At the prices & lack of used on the market on barrels now makes the accessory program look a lot better.  Guess the 17hmr barrels will be even harder to get after the new winchester super mag gets more available.


I bought a used 17hmr sportster several months ago.. its barrel locked up perfectly on my sb2 frame. I tested it on a spent piece of brass and its firing pin was dead on in the center. I ended up selling the hmr gun off since i had no real use for it or the hornet.
Logged

Offline hoytcanon

  • If there is a season for it... I have a pot to cook it in.
  • Trade Count: (9)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
  • Handi's and Henry's... a perfect partnership!
Re: 17 Hornet
« Reply #12 on: March 12, 2013, 02:02:46 PM »
Quote from: Tractorsaw1 on March 12, 2013, 01:47:49 PM
Anyone try to have a 17HMR barrel fitted to a center fire reciever?  I would like to get one & ream it to hornet, but looking at the accessory barrel program looks like they won't do that & i don't have a rim fire reciever.  At the prices & lack of used on the market on barrels now makes the accessory program look a lot better.  Guess the 17hmr barrels will be even harder to get after the new winchester super mag gets more available.
Apparently you didn't read the posts above...
Logged
Hoyt Handi's; Ultra Black .22 K-Hornet Shorty, Black Synthetic K-Hornet Shorty & Nickel .410 Combo (sons), Ultra Granite Grey .22 BR Rem, Ultra Nutmeg .223 & .30/30 Shorty Combo (sons), Ultra Forest .223/7mm-08 Shorty Combo, Ultra Forest .243/.308 Combo, Ultra Nutmeg .243/.308 Combo (sons),  Jacaranda/Cocobolo .30/30 & 7.62X39 Shorty Combo, Ultra Black/Stainless .260 Rem Stub, Ultra Black/Stainless .338 Federal Stub,  Ultra Grey .358 Win, Ultra Grey .35 Whelen, Walnut/Cocobolo Mannlicher .357 MAX, Buffalo Classic Mannlicher .44 Mag Shorties w/NDS-38 peeps (X2; Sons & mine), Ultra Grey Stainless .45/70 & .243 & 20 Gauge Combo, Buffalo Classic 26" .45/70, 9.3X74R Mannlicher, Synthetic Nickel .410 & .30/30 & Versa Pak .22 LR Shorty Combo, Ultra Forest/Cocobolo 12 Gauge 3.5" Turkey; Most scoped with DNZ or Dura Sight one-piece bases and Mueller, Hawke or Nikon scopes... several with Skinner Peeps and Williams Fire Sight ramps.

Offline Tractorsaw1

  • GBO Supporter
  • Trade Count: (16)
  • Avid Poster
  • *****
  • Posts: 218
  • Gender: Male
Re: 17 Hornet
« Reply #13 on: March 12, 2013, 02:05:04 PM »
Thanks Tim, I was just trying to work the get them where the got them angle.  I have fitted several, the problem is usually in the finding part.
Logged
We can skin a buck we can run a trot line & a country boy can survive

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: 17 Hornet
« Reply #14 on: March 13, 2013, 04:21:45 AM »
Quote from: Tractorsaw1 on March 12, 2013, 01:47:49 PM
Anyone try to have a 17HMR barrel fitted to a center fire reciever?  I would like to get one & ream it to hornet, but looking at the accessory barrel program looks like they won't do that & i don't have a rim fire reciever.  At the prices & lack of used on the market on barrels now makes the accessory program look a lot better.  Guess the 17hmr barrels will be even harder to get after the new winchester super mag gets more available.

A couple guys yes. I did two and fudged up the second and had it reamed to 17 furball.
It is a easy job but a bit too much to attempt by hand.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline geezerbiker

  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 1884
  • Gender: Male
Re: 17 Hornet
« Reply #15 on: March 13, 2013, 05:34:22 AM »
Quote from: cwlongshot on March 13, 2013, 04:21:45 AM
Quote from: Tractorsaw1 on March 12, 2013, 01:47:49 PM
Anyone try to have a 17HMR barrel fitted to a center fire reciever?

A couple guys yes. I did two and fudged up the second and had it reamed to 17 furball.
It is a easy job but a bit too much to attempt by hand.
CW

I chose to send mine out to a gunsmith to have it done.  I lucked into a .17 HMR barrel, they can be hard to find if you don't buy the whole rifle...

Tony
Logged

Offline mitchell

  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 2067
  • Gender: Male
Re: 17 Hornet
« Reply #16 on: March 17, 2013, 10:01:55 AM »
Quote from: SEK_22Hornet on February 06, 2013, 07:39:01 AM
Just a quick question to the group - I know a few have 17 Hornet barrels - anyone have any favorite loads for the 17 Hornet yet? I'm still working towards a barrel for my Handi, but have a savage and a CZ that I'm playing with right now....

i shoot a 17 ack hornet my load is a 20gr midwayusa dogtown bullet and 11.5gr of H110 and i get about .5 MOA . its one heck of a Pdog gun.and lots of fun to shoot
Logged
curiosity killed the cat , but i was lead suspect for a while

Offline scooter1979

  • Trade Count: (0)
  • Member
  • *
  • Posts: 42
  • Gender: Male
Re: 17 Hornet
« Reply #17 on: March 26, 2013, 01:14:04 PM »
Right now im using  Lil Gun with a 20gr vmax out of my Savage and getting right at 3600 with groups in the. 7s, with my first batch of trial loads.  Hopin to get out a run more down the barrel this week.
Good Luck and good shooting!
Scooter
Logged
Pages: [1]   Go Up
« previous next »