« previous next »
Pages: [1]   Go Down

Author Topic: 44 spl cast loads  (Read 473 times)

0 Members and 1 Guest are viewing this topic.

Offline Gun Runner

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1140
  • Gender: Male
44 spl cast loads
« on: March 06, 2013, 06:15:27 PM »
Need some load data on 44 spl cast 200-215 gr.

Tks Gun Runner
Logged

Offline sharps4590

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 388
Re: 44 spl cast loads
« Reply #1 on: March 07, 2013, 12:56:26 AM »
Off the top of my head I load 5 grs. of Bullseye for a plinking load in that weight bullet but better check the manuals, they're full of good 44 Spl. cast loads.  Lyman and RCBS Cast Bullet books in particular have good data.
Logged
NRA Patron, 2006
NRA Endowment, 1996
NRA Life, 1988
NAHC Life, 1985
There is no right way to do a wrong thing

Offline twoshooter

  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1259
  • Gender: Male
  • Remember the Starfish......
Re: 44 spl cast loads
« Reply #2 on: March 08, 2013, 02:48:15 PM »
+1 on the Lyman Manual, just get the 49th edition. I use 7.5 Unique.

Logged
1000 years ago Men KNEW the Earth was the center of the Universe.....500 years ago Men KNEW the world was flat....... 15 minutes ago you KNEW man was alone in the universe.... Just IMAGINE what we will know tomorrow !! "K"- from Men in Black.

Offline JustaShooter

  • Trade Count: (23)
  • Senior Member
  • *****
  • Posts: 1025
  • Gender: Male
Re: 44 spl cast loads
« Reply #3 on: March 08, 2013, 05:55:26 PM »
Lyman 48th shows the following for 205gr #427098 (looks to be a flat base truncated cone)

Powder Start MAX
Unique7.08.2
SR-76256.87.7
HS-710.011.6
Blue Dot10.512.0
240013.315.2

For the 210gr #429215 (gas checked semi-wadcutter) it shows:

Powder Start MAX
Unique6.37.7
SR-76256.26.8
HS-79.011.0
Blue Dot9.511.0
240013.014.5

Lyman's 48th shows Unique as the most accurate powder for both bullets.  If you are going to be loading much cast lead, invest in the Lyman Reloading Handbook.  You won't regret it.

As always, verify these with multiple sources, start low, work up watching carefully for excessive pressure signs and never exceed max loads.
Logged
Christian, Husband, Father
NRA Life Member
NRA Certified Range Safety Officer

Anything I post in these forums is my personal opinion formed by my own interpretation of the topic.
IANAL and anything I say is not intended to be nor should it be taken as legal advice.

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: 44 spl cast loads
« Reply #4 on: March 08, 2013, 10:47:19 PM »
7 grains of Unique has been the standard.
Logged
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline tc scout

  • GBO Supporter
  • Trade Count: (37)
  • Contributor
  • *****
  • Posts: 434
  • Gender: Male
Re: 44 spl cast loads
« Reply #5 on: March 08, 2013, 11:52:11 PM »
I have been developing loads for my Contender in 44 special, but with jacketed bullets only in the 180 to 240 Gr range. Unique has worked very well in a wide range of bullets. 2400 is another good powder, I have found the 44 special is not fussy about what you feed it. There is a lot of information on stevespages.com for the 44 special.
Logged
The strongest reason for the
people to retain the right to keep and bear arms
is, as a last resort, to protect themselves
against tyranny in government.

Thomas Jefferson
Pages: [1]   Go Up
« previous next »