« previous next »
Pages: [1]   Go Down

Author Topic: New member invited by Kabar2  (Read 833 times)

0 Members and 1 Guest are viewing this topic.

Offline rivercat

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 120
New member invited by Kabar2
« on: March 14, 2013, 04:35:57 AM »
Hi All,
I am a new member and thanks to Kabar2 for inviting me across.
Well a little about myself, Love of all things that go bang more so with Black powder although bigger the better.
I head up the restoration work at Fort Amherst in Chatham Kent England, It is really a full time job but we are all volunteers at the Fort  with a love of the place. It was built to protect the Royal Dockyard at Chatham.
We currently have around 130no cannon ranging from 3pdrs, 6pdrs both heavy and light, 9pdrs, 18pdrs, 24pdrs, 32pdrs and a 64pdr, we also have a number of mortars from memory about 5no but I might be wrong on that. The age range of these cannon dates from Elizbethan through to the 1800's .
We have a number of shells and cannon balls of which the earliest is Roman and made of stone.
As I am new to this forum I am not sure if this is posted in the correct part but bare with me. I hope to learn some more from you fellows the other side of the pond as at the end of the day we are all learning most of the time.
Will hope to post some stuff up soon.
Rivercat :)
Logged

Offline Ex 49'er

  • GBO Supporter
  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 1975
  • Gender: Male
Re: New member invited by Kabar2
« Reply #1 on: March 14, 2013, 05:58:34 AM »
 
Welcome to the forum. Pull up a chair and sit a spell.
Logged
When you're walking on eggs; don't hop!!

Offline KABAR2

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2830
Re: New member invited by Kabar2
« Reply #2 on: March 14, 2013, 07:00:39 AM »
Welcome!
I found this fellow on another black powder cannon forum and have seen some of his carraige work over there,
so Rivercat when you have time please show off some of your work at the fort.....
 
Allen <><
Logged
Mr president I do not cling to either my gun or my Bible.... my gun is holstered on my side so I may carry my Bible and quote from it!

Sed tamen sal petrae LURO VOPO CAN UTRIET sulphuris; et sic facies tonituum et coruscationem si scias artficium

Offline NinjaToes

  • Trade Count: (0)
  • Member
  • *
  • Posts: 72
  • Gender: Male
Re: New member invited by Kabar2
« Reply #3 on: March 14, 2013, 09:27:47 AM »
Welcome to the forum  8)
Logged
Some people are like a Slinky...

Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs.

Offline Rotunda

  • Trade Count: (0)
  • Member
  • *
  • Posts: 25
Re: New member invited by Kabar2
« Reply #4 on: March 14, 2013, 09:49:18 AM »
Hi Rivercat and welcome.


It's good to have someone else from England on the board.


I got quite a surprise when I saw that you work at Fort Amherst, as I work just down the road in the Universities.


We will have to meet up sometime so I can pick your brains.


Rotunda :)
Logged

Offline Cannon Cocker

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 511
  • Gender: Male
Re: New member invited by Kabar2
« Reply #5 on: March 14, 2013, 02:00:02 PM »
Welcome Rivercat,

The description of where you work and the rough description of the cannon there is a teaser.  Is there a web site with pictures or virtual tours so we can take in the sights.


Logged

Offline Cannoneer

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3950
Re: New member invited by Kabar2
« Reply #6 on: March 14, 2013, 11:10:06 PM »
Welcome to the board, rivercat. Are you familiar with this French piece cast at Douay in 1815, do you know anything of its history?

http://www.fortamherst.com/index.php/gallery/category/2-cannons?limitstart=0




Logged
RIP John. While on vacation July 4th 2013 in northern Wisconsin, he was ATVing with family and pulled ahead of everyone and took off at break-neck speed without a helmet. He lost control.....hit a tree....and the tree won.  He died instantly.

The one thing that you can almost always rely on research leading to, is more research.

Offline rivercat

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 120
Re: New member invited by Kabar2
« Reply #7 on: March 14, 2013, 11:19:24 PM »
Thanks all for the welcome Looking forward to getting involved with you all.
Logged

Offline rivercat

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 120
Re: New member invited by Kabar2
« Reply #8 on: March 14, 2013, 11:22:18 PM »
Quote from: Cannoneer on March 14, 2013, 11:10:06 PM
Welcome to the board, rivercat. Are you familiar with this French piece cast at Douay in 1815, do you know anything of its history?

http://www.fortamherst.com/index.php/gallery/category/2-cannons?limitstart=0




Hi Cannoner,
I do not know much about this one other than it is on loan from the Royal Artillary collection, this is an oldish photo as I have since made the base for it . I will try and get some pictures the weekend but it is part of the fort that is under restoration currently.
Rivercat
Logged

Offline rivercat

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 120
Re: New member invited by Kabar2
« Reply #9 on: March 14, 2013, 11:26:47 PM »
Quote from: Rotunda on March 14, 2013, 09:49:18 AM
Hi Rivercat and welcome.


It's good to have someone else from England on the board.


I got quite a surprise when I saw that you work at Fort Amherst, as I work just down the road in the Universities.


We will have to meet up sometime so I can pick your brains.


Rotunda :)
Hi Rotunda,
I am down there most saturdays but the best time to meet up I guess will be Easter Sunday and Monday as I will be down there firing the 25pdr field gun dated from 1941 which came out of the western dessert.
If it works out will give you a guided tour.
Rivercat
Logged

Offline rivercat

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 120
Re: New member invited by Kabar2
« Reply #10 on: March 14, 2013, 11:30:57 PM »
Quote from: Cannon Cocker on March 14, 2013, 02:00:02 PM
Welcome Rivercat,

The description of where you work and the rough description of the cannon there is a teaser.  Is there a web site with pictures or virtual tours so we can take in the sights.
Hi Cannon Cocker,
Yes there is at the following,  www,fortamherst.com
Logged
Pages: [1]   Go Up
« previous next »