« previous next »
Pages: [1]   Go Down

Author Topic: 35 rem handi  (Read 815 times)

0 Members and 1 Guest are viewing this topic.

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
35 rem handi
« on: March 17, 2013, 11:49:44 AM »
What is the heaviest bullet you have used and how did it work? Getting ready to order a mold and wanted to get some ideas. I have the rcbs 35-200-fn but I use that one for the cheez whiz. I was thinking around 230-240 grain. What do you think?
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: 35 rem handi
« Reply #1 on: March 17, 2013, 12:02:39 PM »
IMHO the 35 REM case dosen't have the powder cap to do justice to any bullet over 220 grains...

The 200 is about perfect.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Oldshooter

  • GBO subscriber and supporter
  • Moderators
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 6426
Re: 35 rem handi
« Reply #2 on: March 17, 2013, 12:10:51 PM »
If I did anything I might reduce weight to get more f/s. but not much. CW is right I think 200 is about perfect.
Logged
“Owning a handgun doesn’t make you armed any more than owning a guitar makes you a musician.”

"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 35 rem handi
« Reply #3 on: March 17, 2013, 12:16:10 PM »
If 250gr cast bullet work in the 357Mag, they'll work in the 35 Rem, I've shot 240gr Mt Baldys in my 1:15˝" 35 Rem, worked great .  ;)

Tim

http://www.gboreloaded.com/forums/index.php/topic,100950.msg1098268280.html#msg1098268280
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: 35 rem handi
« Reply #4 on: March 17, 2013, 12:32:38 PM »
Quote from: quickdtoo on March 17, 2013, 12:16:10 PM
If 250gr cast bullet work in the 357Mag, they'll work in the 35 Rem, I've shot 240gr Mt Baldys in my 1:15˝" 35 Rem, worked great .  ;)

Tim

http://www.gboreloaded.com/forums/index.php/topic,100950.msg1098268280.html#msg1098268280

Guess I should have asked if he wanted to hunt with them or just shoot them... I always assume it for hunting. (Maybe my bad) ??? :-[

I never said it wont work.. :P Heck why stop at 250g? I have some 280's & Barnes makes some 300's  ::) ;) Thing is unless your looking for sub sonic loads they have a trejdectory of a raindow.. the 200-220 is about perfect for this case capacity...  Ever wonder what the factory don't offer a 250g in the 35R but DID offer a 150g?  Yet in 356, 358W and 35 W the 250 is/was offered? Heck they even dropped the 250g in the 356 & 358 as folks wanted the 200s far more.
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 35 rem handi
« Reply #5 on: March 17, 2013, 12:46:35 PM »
Mine were SAAMI loads using Hodgdon data, but Super 35 Rem loads would be even better, the 240gr FPGC Mt Baldy's ran 1925fps. Jason asked for the heaviest bullet used, he didn't mention for what, but I'm sure a 240gr or 250gr FP cast bullet at 2000+fps would work fine for anything a 35 Rem can be used for, and Super 35 Rem loads would be even better.  :P  See the 225gr NBT info in the link, kinda surprising results, prolly why they don't make em any more!

Tim

 http://www.suitorsgarage.com/gunstuff/35remington/35rempart2.html
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 35 rem handi
« Reply #6 on: March 17, 2013, 12:47:58 PM »
I was getting ready to order a 480 grain gc mold for my 45-120 from accurate molds. If you just order a 2 cavity mold it is 100 dollars. If you order a 4 cavity mold with two different designs it is only 148 dollars. Every other caliber I have has its own mold so I figured I would just order one for the 35 rem. Heck one of these days I might ream it out to something bigger then I would already have the mold for it.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 35 rem handi
« Reply #7 on: March 17, 2013, 12:54:47 PM »
Forgot to add.  I live in ohio so its shotgun only. So all my guns are paper punchers until they decide to change the hunting laws. Which might be next year from what we been hearing.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: 35 rem handi
« Reply #8 on: March 17, 2013, 12:58:23 PM »
I lucked into a bunch of re-loading stuff yesterday. I have been contimplating a 205g RCBS mold for some time... ::)

As I was going thru everything, (6 boxes that reams of office/copy paper come in) I found 12 bullet molds!!!  Guess what one was... ::) Well its a Ideal mold .358dia. Its very close profile to the 205g RCBS.  ;D

Personally I don't like any more than a dbl mold. I have read use a single cav for precision. But I have been able to use a double just as well as a single. But I bought a 4 cav 200SWC for 45ACP and tend to have issues with keeping temps correct across the entire mold...

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 35 rem handi
« Reply #9 on: March 17, 2013, 01:14:01 PM »
The trick that seems to work good for anything over a two mold is alternate which cavity you pour first.  I have a six cavity 22 bater mold 55 grain that works great as long as I alternate starting on one end or the other. Only problem with this one is the sizing and gas checking. After a while I start going crosseyed.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: 35 rem handi
« Reply #10 on: March 17, 2013, 01:20:21 PM »
Quote from: quickdtoo on March 17, 2013, 12:16:10 PM
If 250gr cast bullet work in the 357Mag, they'll work in the 35 Rem, I've shot 240gr Mt Baldys in my 1:15˝" 35 Rem, worked great .  ;)

Tim

http://www.gboreloaded.com/forums/index.php/topic,100950.msg1098268280.html#msg1098268280

yep thatsa fact... i even use 280gr jackets (old stuff) in my 35 #1 for hawgs and they have never failed on make'n chops & bacon slabs out past 75yrds............... ;D
 
Logged
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 35 rem handi
« Reply #11 on: March 17, 2013, 01:27:01 PM »
This is probably gonna be the on. It is 250 grain gas checked. Should be able to get some of nose into rifling to save on case capacity.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline 45-70.gov

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 7009
  • Gender: Male
Re: 35 rem handi
« Reply #12 on: March 17, 2013, 02:45:05 PM »
will the check stay within the neck??


looks like a good bolit


where is it from??
Logged
when drugs are outlawed only out laws will have drugs
DO WHAT EVER IT TAKES TO STOP A DEMOCRAT
OBAMACARE....the biggest tax hike in the  history of mankind
free choice and equality  can't co-exist
AFTER THE LIBYAN COVER-UP... remind any  democrat voters ''they sat and  watched them die''...they  told help to ''stand down''

many statements made here are fiction and are for entertainment purposes only and are in no way to be construed as a description of actual events.
no one is encouraged to do anything dangerous or break any laws.

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 35 rem handi
« Reply #13 on: March 17, 2013, 02:52:05 PM »
Mold is from accurate molds.com I would have to do some measuring but I think it will. Most handi 's are long throated so I hope this one is too.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: 35 rem handi
« Reply #14 on: March 20, 2013, 06:33:48 AM »
Quote from: 45-70.gov on March 17, 2013, 02:45:05 PM
will the check stay within the neck??




45 70,
 
If you seat a GC bullet with the check below the neck is there a chance the GC/bullet will swage a bit at loading and then the check fall off in the loaded round?  It is hard for me to imagine a GC coming off a bullet after you pull the trigger because of pressure/hot gas pushing it.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 35 rem handi
« Reply #15 on: March 20, 2013, 06:36:39 AM »
The GC only stays in the neck when pulling bullets!  :-[ If it detaches from the bullet after pulling the trigger, they sometimes end up in chronographs too.  ::)


Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline AtlLaw

  • Moderators
  • Trade Count: (58)
  • Senior Member
  • *****
  • Posts: 6405
  • Gender: Male
  • A good woman, nice bike and fine guns!
Re: 35 rem handi
« Reply #16 on: March 20, 2013, 07:02:53 AM »
Quote from: bikerbeans on March 20, 2013, 06:33:48 AM
If you seat a GC bullet with the check below the neck is there a chance the (GC)...  will fall off ... the ... (bullet when fired)

My question exactly!  Well, maybe not exactly...  :-\   Anyway, like a .308 170 gr. FPGC bullet loaded into a .308 Win.
Logged
Richard
Former Captain of Horse, keeper of the peace and interpreter of statute.  Currently a Gentleman of leisure.
Nemo me impune lacessit

                      
Support your local US Military Vets Motorcycle Club
Pages: [1]   Go Up
« previous next »