« previous next »
Pages: [1]   Go Down

Author Topic: Factory Bluing  (Read 1114 times)

0 Members and 1 Guest are viewing this topic.

Offline YRUpunting?

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 1013
Factory Bluing
« on: April 29, 2013, 05:07:11 AM »
I called H&R about have a barrel re-blued.  Seems the prices have gone up a bit.  Barrels and receivers are now $75 each plus shipping and taxes.
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Factory Bluing
« Reply #1 on: April 29, 2013, 07:02:24 AM »
Geeze, you can buy a new barrel for just a little more.  If they're talking about the same bluing that comes on factory barrels, that's no bargain.  I'd have it done locally.  I see some H&R bluing that is deep and rich, and some others barely cover the steel below.  If I were you,  I think I'd shop that one around.  I seldom slam H&R.  I've almost gotten into fights with people defending them, but the factory bluing needs improvement.  I have a couple of "off the shelf" Handis that almost look Parkerized gray for all steel showing through the grainy thin bluing.  I've got to say, whenever any of these parts went back to H&R for service or repair, they came back beautiful.

Pete


Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Factory Bluing
« Reply #2 on: April 29, 2013, 10:07:09 AM »
Pay the shipping and I will parkerize it for free.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline YRUpunting?

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 1013
Re: Factory Bluing
« Reply #3 on: April 29, 2013, 12:55:56 PM »
Larry, I'll take you up on your generous offer. Thank you.  PM on the way.

I was surprised the cost had gone up that much from what is listed in the FAQ.  I expected it to be higher but they basically priced it so they don't do many. 

Logged

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: Factory Bluing
« Reply #4 on: April 29, 2013, 01:44:56 PM »
Can't beat that ;)


Post a pic when it's done if you can 8)
Logged

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Factory Bluing
« Reply #5 on: April 29, 2013, 01:55:35 PM »
I can do that, a before and after.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline HWB13

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 390
  • Gender: Male
Re: Factory Bluing
« Reply #6 on: April 29, 2013, 02:37:42 PM »
Larry, will keep you  in mind for future projects.  don't need it for free just great to know a resource.
Logged
Kevin   
Handi's:17 Mach2, 17 HMR,17 WSM, 22LR, 22 Win Mag, 204 Ruger, 22 Hornet UV, 22-250 UV, 25-06, 30-30, 35 Whelen, 30-06, 20gaX2, 20GA ultra Slug, 12ga ultra slug, 12 ga Turkey, H&W 45-70 BC X2, 45 LC CC, 44 Mag, 500 S&W and 140+ non-H&R types

If you have to shoot more than once you should not have shot the first time.

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Factory Bluing
« Reply #7 on: April 29, 2013, 05:02:47 PM »
I think it was the threat of paint that tipped me over the edge, that and a little Whisky.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: Factory Bluing
« Reply #8 on: April 29, 2013, 05:08:29 PM »
Quote from: trotterlg on April 29, 2013, 05:02:47 PM
I think it was the threat of paint that tipped me over the edge, that and a little Whisky.  Larry
Paint and whiskey?  A new drink?  ;D ;D ;D
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Factory Bluing
« Reply #9 on: April 29, 2013, 05:31:36 PM »
Wonder how far he'd go with a little Hennessy?
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Factory Bluing
« Reply #10 on: April 30, 2013, 03:58:18 AM »
Quote from: YRUpunting? on April 29, 2013, 05:07:11 AM
I called H&R about have a barrel re-blued.  Seems the prices have gone up a bit.  Barrels and receivers are now $75 each plus shipping and taxes.

As I suspected, you were told the cost for a Remington reblue, the cost for a Handi frame refinish and reblue did go up to $45 for the frame and $35 for the barrel, per Brian.

Tim

Factory Rebluing: Cost is $45 per frame, Barrel is $35.00,  plus shipping & tax.
SB1's can only be refinished in blue or black oxide
SB2's can be refinished in color cased or the same blue or black oxide as the SB1's
They high polish the frames and pins. This will cover most if not all pitting or other cosmetic issues.
You should send the barrel/barrels in with the frame to be refitted if needed as the process involves high temps and sometimes the barrels do not fit the frame correctly afterward.
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline hoytcanon

  • If there is a season for it... I have a pot to cook it in.
  • Trade Count: (9)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
  • Handi's and Henry's... a perfect partnership!
Re: Factory Bluing
« Reply #11 on: April 30, 2013, 04:49:40 AM »
Hey Larry... I have a dozen barrels that I am about to spray with textured candy apple red Krylon... I also have a fridge full of a cheeky, robust Canadian beer!
Logged
Hoyt Handi's; Ultra Black .22 K-Hornet Shorty, Black Synthetic K-Hornet Shorty & Nickel .410 Combo (sons), Ultra Granite Grey .22 BR Rem, Ultra Nutmeg .223 & .30/30 Shorty Combo (sons), Ultra Forest .223/7mm-08 Shorty Combo, Ultra Forest .243/.308 Combo, Ultra Nutmeg .243/.308 Combo (sons),  Jacaranda/Cocobolo .30/30 & 7.62X39 Shorty Combo, Ultra Black/Stainless .260 Rem Stub, Ultra Black/Stainless .338 Federal Stub,  Ultra Grey .358 Win, Ultra Grey .35 Whelen, Walnut/Cocobolo Mannlicher .357 MAX, Buffalo Classic Mannlicher .44 Mag Shorties w/NDS-38 peeps (X2; Sons & mine), Ultra Grey Stainless .45/70 & .243 & 20 Gauge Combo, Buffalo Classic 26" .45/70, 9.3X74R Mannlicher, Synthetic Nickel .410 & .30/30 & Versa Pak .22 LR Shorty Combo, Ultra Forest/Cocobolo 12 Gauge 3.5" Turkey; Most scoped with DNZ or Dura Sight one-piece bases and Mueller, Hawke or Nikon scopes... several with Skinner Peeps and Williams Fire Sight ramps.

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: Factory Bluing
« Reply #12 on: April 30, 2013, 03:27:59 PM »
That Canadian beer gave me headaches 40+ years ago on a fishing trip. Did keep drinking it though :o ;D  A true Whiskey man won't fall for that Krylon bait ;)
Logged

Offline hoytcanon

  • If there is a season for it... I have a pot to cook it in.
  • Trade Count: (9)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
  • Handi's and Henry's... a perfect partnership!
Re: Factory Bluing
« Reply #13 on: April 30, 2013, 04:59:40 PM »
Quote from: bigvarmnt on April 30, 2013, 03:27:59 PM
That Canadian beer gave me headaches 40+ years ago on a fishing trip. Did keep drinking it though :o ;D  A true Whiskey man won't fall for that Krylon bait ;)

It was worth a shot...
Logged
Hoyt Handi's; Ultra Black .22 K-Hornet Shorty, Black Synthetic K-Hornet Shorty & Nickel .410 Combo (sons), Ultra Granite Grey .22 BR Rem, Ultra Nutmeg .223 & .30/30 Shorty Combo (sons), Ultra Forest .223/7mm-08 Shorty Combo, Ultra Forest .243/.308 Combo, Ultra Nutmeg .243/.308 Combo (sons),  Jacaranda/Cocobolo .30/30 & 7.62X39 Shorty Combo, Ultra Black/Stainless .260 Rem Stub, Ultra Black/Stainless .338 Federal Stub,  Ultra Grey .358 Win, Ultra Grey .35 Whelen, Walnut/Cocobolo Mannlicher .357 MAX, Buffalo Classic Mannlicher .44 Mag Shorties w/NDS-38 peeps (X2; Sons & mine), Ultra Grey Stainless .45/70 & .243 & 20 Gauge Combo, Buffalo Classic 26" .45/70, 9.3X74R Mannlicher, Synthetic Nickel .410 & .30/30 & Versa Pak .22 LR Shorty Combo, Ultra Forest/Cocobolo 12 Gauge 3.5" Turkey; Most scoped with DNZ or Dura Sight one-piece bases and Mueller, Hawke or Nikon scopes... several with Skinner Peeps and Williams Fire Sight ramps.

Offline theratdog

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 405
Re: Factory Bluing
« Reply #14 on: April 30, 2013, 11:03:19 PM »
i have blued 6 guns now with blue wonder best stuff i have ever used and i have tried most well worth the price. ;)
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Factory Bluing
« Reply #15 on: April 30, 2013, 11:49:37 PM »
Keep it cold Greg, don't waste it.  I'll be right over ;)

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Factory Bluing
« Reply #16 on: May 03, 2013, 03:31:53 PM »
Got it today and I am finished, didn't get before pictures, but here is an after picture.  It looks a little glossy but it just the oil I put on it.  Larry
 
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline YRUpunting?

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 1013
Re: Factory Bluing
« Reply #17 on: May 03, 2013, 03:56:10 PM »
Larry she looks wonderful.  Thanks again!
Logged

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: Factory Bluing
« Reply #18 on: May 03, 2013, 05:49:19 PM »
Quote from: YRUpunting? on May 03, 2013, 03:56:10 PM
Larry she looks wonderful.  Thanks again!
Ditto to that!  Nice job!  Real nice job!
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Factory Bluing
« Reply #19 on: May 03, 2013, 05:55:37 PM »
Someone should set up a parkerizing service.  It is dead easy and cheap, I have not changed my solution for about 4 years.  All you need is a small sand blaster and a vertical PVC tank with a heater element in the bottom.  I bet you could have all the business you wanted.  I got this barrel at 3:00PM today, and it was done by 5:00PM and I had a few drinks in between.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.
Pages: [1]   Go Up
« previous next »