Author Topic: 35 Whelen  (Read 1713 times)

0 Members and 1 Guest are viewing this topic.

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
35 Whelen
« on: April 29, 2013, 08:22:01 AM »
I finally got a good one! All 5 shots went bang the very first time today when I did a test fire. 55gr of RL15 put the last three 200gr FTXs into 1 1/4" at 85yds. The recoil wasn't as bad either with the 200gr bullet compared to the 225s I have shot in the past.

I plan to load about 10 more for confirmation of zero and then it will get a rim counterbore cut for shooting reformed 7x65R brass. ;)

Thanks, Dinny
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline HWB13

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 390
  • Gender: Male
Re: 35 Whelen
« Reply #1 on: April 29, 2013, 09:56:36 AM »
Dinny, being new to the forum I don't the history behind your gun?  I got mine for my birthday a few years back.  Wanted one ever since the Rocky Mountain Elk Foundation Limited Edition came out.  As soon as I saw them available I was lobbying my wife for it.  This year it was a 100 + year old side by side Sexton. I am truly blessed
Kevin   
Handi's:17 Mach2, 17 HMR,17 WSM, 22LR, 22 Win Mag, 204 Ruger, 22 Hornet UV, 22-250 UV, 25-06, 30-30, 35 Whelen, 30-06, 20gaX2, 20GA ultra Slug, 12ga ultra slug, 12 ga Turkey, H&W 45-70 BC X2, 45 LC CC, 44 Mag, 500 S&W and 140+ non-H&R types

If you have to shoot more than once you should not have shot the first time.

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: 35 Whelen
« Reply #2 on: April 29, 2013, 02:45:51 PM »
Let's get some pics of that Sexton. ;)
 
 
 
Spanky

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: 35 Whelen
« Reply #3 on: April 29, 2013, 02:54:14 PM »
I had an older Whelen barrel a while back that had 60% FTFs. Some here speculated it was my novice reloading and that they could reload it to shoot just fine. I sold it. This newer barrel has no issues, it likes my reloads just fine.

Thanks, Dinny

Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline HWB13

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 390
  • Gender: Male
Re: 35 Whelen
« Reply #4 on: April 29, 2013, 03:26:22 PM »
Let's get some pics of that Sexton. ;)
 
 
 
Spanky
not to take away from Dinny's victory :)

Kevin   
Handi's:17 Mach2, 17 HMR,17 WSM, 22LR, 22 Win Mag, 204 Ruger, 22 Hornet UV, 22-250 UV, 25-06, 30-30, 35 Whelen, 30-06, 20gaX2, 20GA ultra Slug, 12ga ultra slug, 12 ga Turkey, H&W 45-70 BC X2, 45 LC CC, 44 Mag, 500 S&W and 140+ non-H&R types

If you have to shoot more than once you should not have shot the first time.

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: 35 Whelen
« Reply #5 on: April 29, 2013, 03:30:29 PM »
 Nice Sexton! I hope I look that good when I'm 100.  :D

Thanks, Dinny
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline HWB13

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 390
  • Gender: Male
Re: 35 Whelen
« Reply #6 on: April 29, 2013, 03:42:26 PM »
the last bday was half way there  have not had a chance to shot her yet but did get 2 cases of 2 1/2 in shells
Kevin   
Handi's:17 Mach2, 17 HMR,17 WSM, 22LR, 22 Win Mag, 204 Ruger, 22 Hornet UV, 22-250 UV, 25-06, 30-30, 35 Whelen, 30-06, 20gaX2, 20GA ultra Slug, 12ga ultra slug, 12 ga Turkey, H&W 45-70 BC X2, 45 LC CC, 44 Mag, 500 S&W and 140+ non-H&R types

If you have to shoot more than once you should not have shot the first time.

Offline hoytcanon

  • If there is a season for it... I have a pot to cook it in.
  • Trade Count: (9)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
  • Handi's and Henry's... a perfect partnership!
Re: 35 Whelen
« Reply #7 on: April 30, 2013, 04:58:39 AM »
I keep reading about the headspace problems with the Whelen... Never had one with my two, but I figure that H&R must have sorted out the problem because they are still selling Whelen's in a couple configurations... If they were getting an abnormal number of them back, they wouldn't risk the marginal profit in the Whelen sales.
Hoyt Handi's; Ultra Black .22 K-Hornet Shorty, Black Synthetic K-Hornet Shorty & Nickel .410 Combo (sons), Ultra Granite Grey .22 BR Rem, Ultra Nutmeg .223 & .30/30 Shorty Combo (sons), Ultra Forest .223/7mm-08 Shorty Combo, Ultra Forest .243/.308 Combo, Ultra Nutmeg .243/.308 Combo (sons),  Jacaranda/Cocobolo .30/30 & 7.62X39 Shorty Combo, Ultra Black/Stainless .260 Rem Stub, Ultra Black/Stainless .338 Federal Stub,  Ultra Grey .358 Win, Ultra Grey .35 Whelen, Walnut/Cocobolo Mannlicher .357 MAX, Buffalo Classic Mannlicher .44 Mag Shorties w/NDS-38 peeps (X2; Sons & mine), Ultra Grey Stainless .45/70 & .243 & 20 Gauge Combo, Buffalo Classic 26" .45/70, 9.3X74R Mannlicher, Synthetic Nickel .410 & .30/30 & Versa Pak .22 LR Shorty Combo, Ultra Forest/Cocobolo 12 Gauge 3.5" Turkey; Most scoped with DNZ or Dura Sight one-piece bases and Mueller, Hawke or Nikon scopes... several with Skinner Peeps and Williams Fire Sight ramps.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 35 Whelen
« Reply #8 on: April 30, 2013, 05:07:28 AM »
I have two factory H&R 35 Whelens, an RMEF and a 2006 Handi, never had a problem with either as far as headspace, but have had a box of Remington factory brass that had the shoulder pushed back too far on part of it, I formed a false shoulder on them and fireformed them to work just fine in the RMEF, so for a handloader, there's always a work around, not so for the factory ammo shooter.  :-\ I strongly suspect a lot of the problems are caused by bad brass in factory ammo.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Sourdough

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 8150
  • Gender: Male
Re: 35 Whelen
« Reply #9 on: April 30, 2013, 10:04:25 AM »
I got one back when they were making the RMEF guns.  When I first got it I had some FTF and FTEject issues.  Sent it back to the factory, they fixed it.  They also did a trigger job.  Have had no issues since.  It shoots great.  My Dad killed a Moose with it, one shot.
Where is old Joe when we really need him?  Alaska Independence    Calling Illegal Immigrants "Undocumented Aliens" is like calling Drug Dealers "Unlicensed Pharmacists"
What Is A Veteran?
A 'Veteran' -- whether active duty, discharged, retired, or reserve -- is someone who, at one point in his life, wrote a blank check made payable to 'The United States of America,' for an amount of 'up to, and including his life.' That is honor, and there are way too many people in this country today who no longer understand that fact.

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: 35 Whelen
« Reply #10 on: April 30, 2013, 01:32:39 PM »
I have two factory H&R 35 Whelens, an RMEF and a 2006 Handi, never had a problem with either as far as headspace, but have had a box of Remington factory brass that had the shoulder pushed back too far on part of it, I formed a false shoulder on them and fireformed them to work just fine in the RMEF, so for a handloader, there's always a work around, not so for the factory ammo shooter.  :-\ I strongly suspect a lot of the problems are caused by bad brass in factory ammo.

Tim
yep we have 3 and I know of several more that has no faults....and all of us are premium handloaders from hell !!
and can handle much larger prollums if need be.............. ;D
I don't believe in put'na Band-Aid on something to remedy a failure.
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline geezerbiker

  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 1884
  • Gender: Male
Re: 35 Whelen
« Reply #11 on: April 30, 2013, 02:08:15 PM »
OK guys you got me what's a RMEF gun?

Tony

Offline bucco921

  • GBO Supporter
  • Trade Count: (29)
  • Contributor
  • *****
  • Posts: 336
Re: 35 Whelen
« Reply #12 on: April 30, 2013, 02:09:37 PM »
OK guys you got me what's a RMEF gun?

Tony


Rocky Mountain Elk Foundation

Offline HWB13

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 390
  • Gender: Male
Re: 35 Whelen
« Reply #13 on: April 30, 2013, 02:24:42 PM »
I have never had a problem with mine.  I do know there were alot with the 400's.  Problem being the depth and angle of the shoulder.

Kevin   
Handi's:17 Mach2, 17 HMR,17 WSM, 22LR, 22 Win Mag, 204 Ruger, 22 Hornet UV, 22-250 UV, 25-06, 30-30, 35 Whelen, 30-06, 20gaX2, 20GA ultra Slug, 12ga ultra slug, 12 ga Turkey, H&W 45-70 BC X2, 45 LC CC, 44 Mag, 500 S&W and 140+ non-H&R types

If you have to shoot more than once you should not have shot the first time.

Offline fullup3

  • Trade Count: (0)
  • Member
  • *
  • Posts: 79
Re: 35 Whelen
« Reply #14 on: May 01, 2013, 09:17:34 AM »
Glad this one is working out for you.  I got one a year or so ago through the accessory program and it is a very good barrel.  I've only shot handloads through it...actually Varget pushing 200grain hornady FTX.  It's an honest 3/4" barrel at 100yds with this combo.  Took a nice MS whitetail with her this past season.   

Offline HWB13

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 390
  • Gender: Male
Re: 35 Whelen
« Reply #15 on: May 01, 2013, 07:48:46 PM »
Haven't started to reload yet, it's on the list. But I paired mine up with a new 25-06 barrel this spring.  Even with available factory loads the combo is good for any med to large game in North America.
Kevin   
Handi's:17 Mach2, 17 HMR,17 WSM, 22LR, 22 Win Mag, 204 Ruger, 22 Hornet UV, 22-250 UV, 25-06, 30-30, 35 Whelen, 30-06, 20gaX2, 20GA ultra Slug, 12ga ultra slug, 12 ga Turkey, H&W 45-70 BC X2, 45 LC CC, 44 Mag, 500 S&W and 140+ non-H&R types

If you have to shoot more than once you should not have shot the first time.

Offline nanuk-O-dah-Nort

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 701
Re: 35 Whelen
« Reply #16 on: May 03, 2013, 05:27:28 AM »
I'd like to have a 26" barreled 35Whelen!


on my two, to check HS when I first got them, I dropped 270 factory loads in them, and they fired fine.

I have some 35W factory loads now to try, but haven't been able to get the time.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 35 Whelen
« Reply #17 on: May 03, 2013, 05:35:08 AM »
I'd like to have a 26" barreled 35Whelen!


They're out there, but being made only for one year, not many and they bring a good price, mine was $350 8yrs ago.

Tim

http://www.migunowners.org/forum/showthread.php?t=239031
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline casca1

  • GBO Supporter
  • Trade Count: (55)
  • Contributor
  • *****
  • Posts: 441
  • Gender: Male
Re: 35 Whelen
« Reply #18 on: May 03, 2013, 05:42:32 AM »
I picked up a barrel on trade several years ago was going to start working up loads  UNTIL < I read the 55gr. part.
it wouldn't take long to eat up my powder reserve with that and the 500 s&w.
 
I did get my hands on 6000 magnum rifle primers though.  What other powders that might fill the need for the whelen?
 
thanx
casca
I DON'T WANT NO MORE ARMY LIFE
PLEASE SIR,
I WANNA GO HOME
1983-1990

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 35 Whelen
« Reply #19 on: May 03, 2013, 05:48:41 AM »
RL15 works good, Alliant PP 2000MR is supposed to work good, although I haven't tried it yet.

Tim

http://35cal.com/loading.html

http://www.reloadammo.com/35whelenload.htm
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: 35 Whelen
« Reply #20 on: May 03, 2013, 12:38:44 PM »
ours like imr-4895 with there fav bullet and recipe........ 8)
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline hoytcanon

  • If there is a season for it... I have a pot to cook it in.
  • Trade Count: (9)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
  • Handi's and Henry's... a perfect partnership!
Re: 35 Whelen
« Reply #21 on: May 03, 2013, 05:01:07 PM »
My preferred Whelen powders are H4895 and Varget. I use the 180 SSP's for soft range loads and 200 FTX, 225 AB and 250 SP-RP for full loads.
Hoyt Handi's; Ultra Black .22 K-Hornet Shorty, Black Synthetic K-Hornet Shorty & Nickel .410 Combo (sons), Ultra Granite Grey .22 BR Rem, Ultra Nutmeg .223 & .30/30 Shorty Combo (sons), Ultra Forest .223/7mm-08 Shorty Combo, Ultra Forest .243/.308 Combo, Ultra Nutmeg .243/.308 Combo (sons),  Jacaranda/Cocobolo .30/30 & 7.62X39 Shorty Combo, Ultra Black/Stainless .260 Rem Stub, Ultra Black/Stainless .338 Federal Stub,  Ultra Grey .358 Win, Ultra Grey .35 Whelen, Walnut/Cocobolo Mannlicher .357 MAX, Buffalo Classic Mannlicher .44 Mag Shorties w/NDS-38 peeps (X2; Sons & mine), Ultra Grey Stainless .45/70 & .243 & 20 Gauge Combo, Buffalo Classic 26" .45/70, 9.3X74R Mannlicher, Synthetic Nickel .410 & .30/30 & Versa Pak .22 LR Shorty Combo, Ultra Forest/Cocobolo 12 Gauge 3.5" Turkey; Most scoped with DNZ or Dura Sight one-piece bases and Mueller, Hawke or Nikon scopes... several with Skinner Peeps and Williams Fire Sight ramps.

Offline nanuk-O-dah-Nort

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 701
Re: 35 Whelen
« Reply #22 on: May 04, 2013, 07:21:25 AM »
I picked up a barrel on trade several years ago was going to start working up loads  UNTIL < I read the 55gr. part.
it wouldn't take long to eat up my powder reserve with that and the 500 s&w.
 
I did get my hands on 6000 magnum rifle primers though.  What other powders that might fill the need for the whelen?
 
thanx
casca

Start at 10grains of Unique and work your way up???

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: 35 Whelen
« Reply #23 on: May 04, 2013, 01:45:31 PM »
A 35 Whelen loaded to .356 Win. or .358 Win. ballistics will be just fine for most needs, and a lighter cast bullet load even more so. Just because its a big case, or a big engine, doesnt mean your foot has to be in it ALL the time.
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Singlebarrel

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 157
  • Gender: Male
Re: 35 Whelen
« Reply #24 on: May 05, 2013, 11:12:35 AM »
gcrank is right about the lower velocity loads in a Whelen.  I have a Whelen in a Pro Hunter.  Even with the recoil absorbing stock a full power load can be rough after a while.  I have substantial back and neck issues with a lot of hardware holding things together.  I can shoot the full power loads, but only if I have to.  Recoil is pain.  I am experimenting with loads to push a 200 grain bullet around 2500 fps or so.  There isn't much this will not kill and they sure are nicer to shoot.  Just have to find the right amount of the right powder.