« previous next »
Pages: [1]   Go Down

Author Topic: Protecting the end of chopped barrels?  (Read 1114 times)

0 Members and 1 Guest are viewing this topic.

Offline acgill07

  • Trade Count: (6)
  • Member
  • *
  • Posts: 39
Protecting the end of chopped barrels?
« on: April 30, 2013, 07:38:10 AM »
I have a 20 gauge that I had cut down and threaded for chokes.  I have noticed that the very end of the barrel and the section inside the barrel before the threads start, have developed significant surface rust.  I have been thinking about cutting down my .357 as well and I know plenty of people on here have done this.  What do you use to prevent rust?  Just spot blueing?  Thanks for your help.


Andy
Logged

Offline knight0334

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 1138
  • Gender: Male
    • Pennsylvania Firearm Owners
Re: Protecting the end of chopped barrels?
« Reply #1 on: April 30, 2013, 09:49:45 AM »
Cold bluing does jack crap for rust protection.   Hot bluing is what you need.  ...that or one of the other methods like true case hardening, parkerizing, paint, etc, etc.

However, those other methods tend to change the dimensions.  And case hardening a barrel isn't practical.   ...so, hot bluing is really the only method that will work on a bearing surface.
Logged
RIP ~ Teeny: b.10/27/66 - d.07/03/07

Offline Airsporter

  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 893
  • Gender: Male
Re: Protecting the end of chopped barrels?
« Reply #2 on: April 30, 2013, 10:26:55 AM »
Try some Oxpho Blue from Brownells.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Protecting the end of chopped barrels?
« Reply #3 on: April 30, 2013, 10:33:26 AM »
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline acgill07

  • Trade Count: (6)
  • Member
  • *
  • Posts: 39
Re: Protecting the end of chopped barrels?
« Reply #4 on: April 30, 2013, 10:46:18 AM »
Thanks for the replies.  I will order some oxpho. 
Logged

Offline Flynmoose

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
Re: Protecting the end of chopped barrels?
« Reply #5 on: April 30, 2013, 02:05:41 PM »
I used the Oxpho Blue on my 16 1/2 223 Handi, I call it Stubby. It has stood up well for over two years so far.
FM
Logged
Dear God please protect our troops, especially the snipers.

Offline HWB13

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 390
  • Gender: Male
Re: Protecting the end of chopped barrels?
« Reply #6 on: April 30, 2013, 02:38:34 PM »
when it comes to the oil on top I have had to many years of Breakfree being stuffed down my throat  (20 yrs USMC). had sworn off all CLP's.  Thinking not going to take the same meds for constipation and diarrhea. but about ten years ago found FP-10. It works like nothing else.  it leave a protective layer and carbon won't stick and rust won't form.  That's just my 2 cents worth.
Logged
Kevin   
Handi's:17 Mach2, 17 HMR,17 WSM, 22LR, 22 Win Mag, 204 Ruger, 22 Hornet UV, 22-250 UV, 25-06, 30-30, 35 Whelen, 30-06, 20gaX2, 20GA ultra Slug, 12ga ultra slug, 12 ga Turkey, H&W 45-70 BC X2, 45 LC CC, 44 Mag, 500 S&W and 140+ non-H&R types

If you have to shoot more than once you should not have shot the first time.

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Protecting the end of chopped barrels?
« Reply #7 on: April 30, 2013, 04:28:50 PM »
I ended up doing a whole H&R 12 ga using Birchwood Casey's Permablue paste and SuperBlue for hardened steels.  I had poor luck with their products previously, but never knew about boiling water being the fix.  I boiled each part and while it was still hot added the blue, then rinsed, steel wooled and boiled again.  I left the blue on for about 3 minutes each layer and it came out good.  For the end of the barrel, the SuperBlue would be perfect.  Just hold in a pot of boiling water for a few minutes and then dip into super blue (liquid) and pull out and let sit for 3 minutes, then rinse well with water, steel wool it and do it again until it matches the factory blue.  Probably only take 2 coats.
 
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Protecting the end of chopped barrels?
« Reply #8 on: April 30, 2013, 05:43:09 PM »
Quote from: HWB13 on April 30, 2013, 02:38:34 PM
when it comes to the oil on top I have had to many years of Breakfree being stuffed down my throat  (20 yrs USMC). had sworn off all CLP's.  Thinking not going to take the same meds for constipation and diarrhea. but about ten years ago found FP-10. It works like nothing else.  it leave a protective layer and carbon won't stick and rust won't form.  That's just my 2 cents worth.

I'd think twice about using FP10 over Eezox, FP10 didn't fair as well in either of the tests.

Tim


http://www.6mmbr.com/corrosiontest.html



http://www.ctmuzzleloaders.com/ctml_experiments/corrosion/corrosion.html
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline theratdog

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 405
Re: Protecting the end of chopped barrels?
« Reply #9 on: April 30, 2013, 10:56:17 PM »
where is kroil?
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Protecting the end of chopped barrels?
« Reply #10 on: April 30, 2013, 11:30:27 PM »
Quote from: theratdog on April 30, 2013, 10:56:17 PM
where is kroil?

http://www.kanolabs.com/google/

Its been around for many years but not readily avalible in stores.  Its good stuff for freeing sticky and rusted bolts and cleaning gun barrels!!  Grab a can!

As for the crowns, I usually do nothing... i leave them in the white. I keep everything wiped off/down with Eezox and have for many years. No ''finish'' has ever been needed.  :o ;)

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Protecting the end of chopped barrels?
« Reply #11 on: May 01, 2013, 02:29:58 AM »
CW and Tim have lead me down the primrose path.  I've compromised my almost religious convictions about cleaning....no. it's more about not cleaning guns.  I just ordered an 18 ounce Eezox :o   Now, I'm cowering, waiting for the Prince of Filth to strike.....be assured it'll be a lifetime supply ;)

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Protecting the end of chopped barrels?
« Reply #12 on: May 01, 2013, 04:00:46 AM »
Quote from: theratdog on April 30, 2013, 10:56:17 PM
where is kroil?

Unsatisfactory! Kroil is a penetrant which it works as advertised, but it's not a protectant.  ;)

Tim

http://www.thegunzone.com/rust.html
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline nanuk-O-dah-Nort

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 701
Re: Protecting the end of chopped barrels?
« Reply #13 on: May 01, 2013, 01:04:11 PM »
this summer, I want to try my hand at parkerizing, Bubba style.
Logged

Offline YRUpunting?

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 1013
Re: Protecting the end of chopped barrels?
« Reply #14 on: May 01, 2013, 01:39:08 PM »
Quote from: nanuk-O-dah-Nort on May 01, 2013, 01:04:11 PM
this summer, I want to try my hand at parkerizing, Bubba style.

Does that involve a cauldron and an open fire?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Protecting the end of chopped barrels?
« Reply #15 on: May 01, 2013, 01:41:50 PM »
Larry says the cauldron and open fire are for those that paint handis!  ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Protecting the end of chopped barrels?
« Reply #16 on: May 01, 2013, 02:09:11 PM »
Quote from: petemi on May 01, 2013, 02:29:58 AM
CW and Tim have lead me down the primrose path.  I've compromised my almost religious convictions about cleaning....no. it's more about not cleaning guns.  I just ordered an 18 ounce Eezox :o   Now, I'm cowering, waiting for the Prince of Filth to strike.....be assured it'll be a lifetime supply ;)

Pete

Your gonna like it Peter!!  I did not know you had difficulties finding it. I would have sent you a can!!

Now if you start using it as after shave, you have gonna little far... everyone knows HOPPIES gets used for that!!  ::) ::)

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Protecting the end of chopped barrels?
« Reply #17 on: May 01, 2013, 02:55:28 PM »
Quote from: quickdtoo on May 01, 2013, 01:41:50 PM
Larry says the cauldron and open fire are for those that paint handis!  ;D

Tim

Larry doesn't have much of a future at Profino Gunworks. ::)

Friend of mine built one of the heated Parkerizing tanks, IIRC it is similar to what Larry built, and it works very nicely.  Parkerizing a barrel is very easy for me because my friend does the work and I stand and watch him. ;D
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.
Pages: [1]   Go Up
« previous next »