Author Topic: When did H&R offer a 20" .308 Barrel?  (Read 761 times)

0 Members and 1 Guest are viewing this topic.

Offline garbhead

  • GBO Supporter
  • Trade Count: (114)
  • A Real Regular
  • *****
  • Posts: 960
  • Gender: Male
  • For every Goliath, there is a stone.
When did H&R offer a 20" .308 Barrel?
« on: May 06, 2013, 11:23:21 AM »
I was cleaning out the safe this morning and ran onto my 308...I measured the barrel and its 20" and bull..I thought "it must have been on a youth model" So I looked up the youth model on H&R website and they show it as 22"...did it come as a 20" on the survivor?
12g shortie w/chokes,Tamer .410,12g "Buck" slug gun w/20g extra barrel, 12g smooth bore tracker I, 45/410 w/22vp matched set, 7mm-08, .308 20",

my avatar pic is my 1960 Rambler I bought in 1972 for $175..6 banger 3-on-the-tree...drove it for 5 yrs  22mpg.. was "hot-rodding" (LOL) one night...tore out 1st/reverse gear. Drove it that way for 2 yrs(with no reverse and only 2nd and high)  Had to really plan ahead when parking.
sold it for $125
Do not argue with an idiot. He will drag you down to his level and beat you with experience.--Mark Twain

Politicians should only be allowed one term in office, then one term in jail.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: When did H&R offer a 20" .308 Barrel?
« Reply #1 on: May 06, 2013, 12:11:06 PM »
Never that I know of, only 22", if it's a factory barrel, it's a first, it's likely been cut by someone.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline garbhead

  • GBO Supporter
  • Trade Count: (114)
  • A Real Regular
  • *****
  • Posts: 960
  • Gender: Male
  • For every Goliath, there is a stone.
Re: When did H&R offer a 20" .308 Barrel?
« Reply #2 on: May 06, 2013, 01:51:55 PM »
Don't think so, but ??  Looks like factory crown. CBA serial number
12g shortie w/chokes,Tamer .410,12g "Buck" slug gun w/20g extra barrel, 12g smooth bore tracker I, 45/410 w/22vp matched set, 7mm-08, .308 20",

my avatar pic is my 1960 Rambler I bought in 1972 for $175..6 banger 3-on-the-tree...drove it for 5 yrs  22mpg.. was "hot-rodding" (LOL) one night...tore out 1st/reverse gear. Drove it that way for 2 yrs(with no reverse and only 2nd and high)  Had to really plan ahead when parking.
sold it for $125
Do not argue with an idiot. He will drag you down to his level and beat you with experience.--Mark Twain

Politicians should only be allowed one term in office, then one term in jail.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: When did H&R offer a 20" .308 Barrel?
« Reply #3 on: May 06, 2013, 01:55:13 PM »
Looks just like the GBO crown cutter, PTG makes more than one.

Tim

http://www.midwayusa.com/product/681502/ptg-interchangeable-pilot-muzzle-crown-tool-1-target

"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Winter Hawk

  • Trade Count: (47)
  • Senior Member
  • *****
  • Posts: 1947
  • Gender: Male
Re: When did H&R offer a 20" .308 Barrel?
« Reply #4 on: May 06, 2013, 04:17:18 PM »
Is that a factory barrel (i.e. did it come with the frame from the factory and sports the last three of four of the serial number) or one picked up from a member here?

-Kees-
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone

Offline garbhead

  • GBO Supporter
  • Trade Count: (114)
  • A Real Regular
  • *****
  • Posts: 960
  • Gender: Male
  • For every Goliath, there is a stone.
Re: When did H&R offer a 20" .308 Barrel?
« Reply #5 on: May 07, 2013, 01:23:46 AM »
It is matching number set...came with youth camo stockset
12g shortie w/chokes,Tamer .410,12g "Buck" slug gun w/20g extra barrel, 12g smooth bore tracker I, 45/410 w/22vp matched set, 7mm-08, .308 20",

my avatar pic is my 1960 Rambler I bought in 1972 for $175..6 banger 3-on-the-tree...drove it for 5 yrs  22mpg.. was "hot-rodding" (LOL) one night...tore out 1st/reverse gear. Drove it that way for 2 yrs(with no reverse and only 2nd and high)  Had to really plan ahead when parking.
sold it for $125
Do not argue with an idiot. He will drag you down to his level and beat you with experience.--Mark Twain

Politicians should only be allowed one term in office, then one term in jail.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: When did H&R offer a 20" .308 Barrel?
« Reply #6 on: May 07, 2013, 03:39:56 AM »
It's always possible it's a factory offering, but like I said, it's the first reported here. They make a compact 7mm-08 with wood stock(SB2-Y08), but it still has a 22" barrel. My 44mag Superlight compact(their name) with youth stock set with 20" barrel, but it has a standard contour barrel just like my 22" 44 mag.

Tim

http://www.hr1871.com/firearms/rifles/youth.asp
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Sourdough

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 8150
  • Gender: Male
Re: When did H&R offer a 20" .308 Barrel?
« Reply #7 on: May 08, 2013, 06:28:57 AM »
Is it an H&R or is it a NEF?  In my discussions with Mr. Garrison, CEO of New England Firearms, if the customer ordered it they would reconfigure their gun almost any way you wanted it.  If someone ordered a NEF, in .308 with a 20" barrel they would send it out.  That's how I got a Standard Handi Frame with a .35 Whelen barrel back when they were doing the REF run.  They barreled it up just for me.  Now I'm sure that stopped after Marlin took over.
Where is old Joe when we really need him?  Alaska Independence    Calling Illegal Immigrants "Undocumented Aliens" is like calling Drug Dealers "Unlicensed Pharmacists"
What Is A Veteran?
A 'Veteran' -- whether active duty, discharged, retired, or reserve -- is someone who, at one point in his life, wrote a blank check made payable to 'The United States of America,' for an amount of 'up to, and including his life.' That is honor, and there are way too many people in this country today who no longer understand that fact.

Offline garbhead

  • GBO Supporter
  • Trade Count: (114)
  • A Real Regular
  • *****
  • Posts: 960
  • Gender: Male
  • For every Goliath, there is a stone.
Re: When did H&R offer a 20" .308 Barrel?
« Reply #8 on: May 08, 2013, 08:40:21 AM »
Its an H&R.. CBA...I asked the guy I bought it from if he chopped it. He said no, but he had original sales literature on it somewhere, he's gonna send it to me.
12g shortie w/chokes,Tamer .410,12g "Buck" slug gun w/20g extra barrel, 12g smooth bore tracker I, 45/410 w/22vp matched set, 7mm-08, .308 20",

my avatar pic is my 1960 Rambler I bought in 1972 for $175..6 banger 3-on-the-tree...drove it for 5 yrs  22mpg.. was "hot-rodding" (LOL) one night...tore out 1st/reverse gear. Drove it that way for 2 yrs(with no reverse and only 2nd and high)  Had to really plan ahead when parking.
sold it for $125
Do not argue with an idiot. He will drag you down to his level and beat you with experience.--Mark Twain

Politicians should only be allowed one term in office, then one term in jail.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: When did H&R offer a 20" .308 Barrel?
« Reply #9 on: May 08, 2013, 08:56:39 AM »
See if you can get the SB2-XXX or 5 digit model number, they'd be on the end of the factory box,  that would help the most.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline vin

  • Trade Count: (0)
  • Member
  • *
  • Posts: 22
Re: When did H&R offer a 20" .308 Barrel?
« Reply #10 on: May 10, 2013, 09:10:51 AM »
Just a thought. Where did you measure from, the end of the chamber, or where the barrel meets the receiver? For the longest time I had been lead to believe that you had to measure from the end of the chamber. In a .308, that would throw it off about 2", right?

Offline garbhead

  • GBO Supporter
  • Trade Count: (114)
  • A Real Regular
  • *****
  • Posts: 960
  • Gender: Male
  • For every Goliath, there is a stone.
Re: When did H&R offer a 20" .308 Barrel?
« Reply #11 on: May 10, 2013, 10:48:42 AM »
BATF rules state that barrel length on single shots like these are measured from where rec/barrel meet and the muzzle. That's why in the pic the "ignorant end" of the tape is hooked on the muzzle.
12g shortie w/chokes,Tamer .410,12g "Buck" slug gun w/20g extra barrel, 12g smooth bore tracker I, 45/410 w/22vp matched set, 7mm-08, .308 20",

my avatar pic is my 1960 Rambler I bought in 1972 for $175..6 banger 3-on-the-tree...drove it for 5 yrs  22mpg.. was "hot-rodding" (LOL) one night...tore out 1st/reverse gear. Drove it that way for 2 yrs(with no reverse and only 2nd and high)  Had to really plan ahead when parking.
sold it for $125
Do not argue with an idiot. He will drag you down to his level and beat you with experience.--Mark Twain

Politicians should only be allowed one term in office, then one term in jail.

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: When did H&R offer a 20" .308 Barrel?
« Reply #12 on: May 10, 2013, 11:30:54 AM »
I hava 2008 survivor witha 20" heavy "bull" conture barrel and I have seen plenty of them sold from the surrounding academy sports and basspro
in that time era.
maybe its justa promotion thing or a " just for you" kinda thing.................. ::)
 
 
 
 
 
 
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.