Author Topic: BLR vrs. ???  (Read 2179 times)

0 Members and 2 Guests are viewing this topic.

Offline flmason

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 746
BLR vrs. ???
« on: May 20, 2013, 09:45:06 PM »
Hi All,
   Tripped over a BLR in .308 in the LGS the other day. Was kind of curious how it rates against the standard bearers from Winchester and Marlin?

Fit, finish etc. was what you expect from Browning. But have to admit, have never thought about one before

Offline Ranger99

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 9581
Re: BLR vrs. ???
« Reply #1 on: May 20, 2013, 10:38:53 PM »
if the price is right with you,
and they'll guarantee the magazine,
i wouldn't hesitate to get it.
i wouldn't take for mine.
18 MINUTES.  . . . . . .

Offline Ranger99

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 9581
Re: BLR vrs. ???
« Reply #2 on: May 20, 2013, 10:40:15 PM »
uh. . . you may also want to
make sure you can get some ammo :-\
18 MINUTES.  . . . . . .

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18263
Re: BLR vrs. ???
« Reply #3 on: May 21, 2013, 12:04:55 AM »
some dont like them because of there moderized action but i think there a much better looking rifle then the typical sav. or winchester that are the only others to chamber rounds  like the 308. My dads hunted with one for about 20 years and youd have to put a gun to his head to get it away from him.
blue lives matter

Offline Bigeasy

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1986
  • Gender: Male
Re: BLR vrs. ???
« Reply #4 on: May 21, 2013, 12:30:10 AM »
I have owned a couple of them over the years, and still have my early, pre-81 in .358 win.  One of my favorite rifles.  Accurate, smooth action, good handling, reliably feeds anything you can fit in the magazine, what's not to like?
 
I enjoy my traditional Marlin and Winchester levers, especially my Marlin 1894 in 44 mag., as it works well in the thick stuff I usually hunt.  But the BLR is a much more versatile rifle.  I can load it from light 357 mag levels with cast bullets for plinking and small game, up to full power loads with high BC bullets that will reach out to 300 yards and beyond, something most traditional levers cant do effectively.
 
Larry.
Personal opinion is a good thing, and everyone is entitled to one.  The hard part is separating informed opinion from someone who is just blowing hot air....

Offline mannyrock

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2081
Re: BLR vrs. ???
« Reply #5 on: May 21, 2013, 04:00:54 AM »
Flmason,


    I think you said in your other posts that you were actually interested in a lever as a semi-tactical, shtf rifle.   Though the BLR is a pretty good gun, I don't believe it fits the bill as well as a Marlin or Winchester.   


   Maximum capacity is 4 rounds.    Detachable magazine can be lost, and replacements costs alot of money.  ($70 or so).


   Though the .308 is superior as a cartridge to the .30-30, on balance the .30-30 is more than good enough, and having seven shots and no magazine to lose would tip the balance for me in favor of a Marlin or Winchester.   Moreover, due to the fact that the Marlin and Winchester are out there in the millions, in every conceivable condition, spare parts are easy to find.  Though there is always a concern about denting the magazine tube, it is pretty easy to buy a spare and put it away for the future, or to tap out the dent with the proper size brass rod.


   The Marlin is very easy to take apart.  Very easy to replace parts yourself.  The BLR simply cannot be taken apart and put back together except by a very very experienced person, and some gunsmiths won't even do it.  The rack and pinion bolt system is a wonderful piece of engineering, it is also cursed with complexity.


  For a pure hunting rifle, go with the BLR (if you can live with the high gloss, plastic type finish, that gives you a white streak every time you scuff it).  Otherwise, go with the Marlin or Winchester.  Personally, I vote Marlin.




  Hope this helps.


Mannyrock


 

Offline mannyrock

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2081
Re: BLR vrs. ???
« Reply #6 on: May 21, 2013, 04:04:18 AM »



  And P.S., for the cost of one used BLR in VG+ condition, you can get two used Marlins in VG+ condition.  :-)


Mannyrock

Offline Ranch13

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1062
  • Gender: Male
    • Historic Shooting .com
Re: BLR vrs. ???
« Reply #7 on: May 21, 2013, 04:20:15 AM »
Big fan of the BLR. handles, carries, like a hunting levergun should, shoots like a good bolt gun is supposed to.
Hunting rifle 4 rounds in the magazine is sufficient , unless ones marksmanship only allows for hitting a bull in the butt with a scoop shovel if your sitting on him...
Used BLR's around here go from 350-600 depending on condition and the scope.
The "modern" lever action mantra, not exactly true , up in Cody at the BBHC, in the Browning collection, they have the prototypes that JMB hisself was working on, and the ones they finally made in the late 60's early 70's didn't fall very far from the tree.
In the 1920's "sheeple" was a term coined by the National Socialist Party in Germany to describe people that would not vote for Hitler. In the 1930's they held Hitler as the only one that would bring pride back to Germany and bring the budget and economy back.....

Offline flmason

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 746
Re: BLR vrs. ???
« Reply #8 on: May 22, 2013, 06:13:40 PM »



  And P.S., for the cost of one used BLR in VG+ condition, you can get two used Marlins in VG+ condition.  :-)


Mannyrock

Well, I'd really like one of the SS Marlins in 45-70 with the full length magazine, but without the "Hollywood" big loop. But haven't been seeing any. So in all honesty I think I'll end up with a 30-30 336 of some sort in blue, in all reality. I'm not up for a big search, so I make just take the gamble of ordering one of the Remlin 336's and tossing some salt over my shoulder, LOL!

But this BLR was sitting there and was curious about it. Also kind of curious why that short throw Sako with the gearing from back in the 70's never caught on.

Regarding the semi-tactical... found that Marstar up in Canada, or really Canada in general can get the Norinco SKS's at about 200 each and the M1A's for 450 each. I know opinions vary on Norinco, but I'd be up to try either if they could be had down here. Had one of the Norinco "paratrooper" models back when when they were flooding the market here. Technically I still own it, but it's in family's gun safe from years ago.. went through a bad time... went broke...thanks to the job market at the time and obsolete skills.. don't talk to that part of the family...anymore...

Long story short.. I don't ever expect to retrieve it... well until they tell me that part of the family is dead and gone, LOL!, but I do miss the thing, it was a handi little semi-auto. Chrome bore was a nice touch too.

Offline Ranger99

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 9581
Re: BLR vrs. ???
« Reply #9 on: May 22, 2013, 06:22:33 PM »
nothing wrong with the norincos.
i had quite a few of them when they
could be had for 60-80.00
no they won't hang with a match M1A,
but for what they were/are, they can't
be beat.


the blr, the old originals are going up
in price more everyday. i don't think
you'd lose money if you decided to get it
if it was priced right.
18 MINUTES.  . . . . . .

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18263
Re: BLR vrs. ???
« Reply #10 on: May 24, 2013, 12:59:51 AM »
ill take the other side of the argument and say if you wanted a tactical lever gun a clip fed gun would be hands down better. Guy could keep 4 extra mags in pouches and reload alot faster. As to loosing mags our soldiers have been using mag fed guns for over 50 years and if tube fed was better in combat im sure we would have gone that way. Sure the mags arent cheap but id bet the typical civilan who buys an ar has 300 bucks worth of stuff hanging off of it
Flmason,


    I think you said in your other posts that you were actually interested in a lever as a semi-tactical, shtf rifle.   Though the BLR is a pretty good gun, I don't believe it fits the bill as well as a Marlin or Winchester.   


   Maximum capacity is 4 rounds.    Detachable magazine can be lost, and replacements costs alot of money.  ($70 or so).


   Though the .308 is superior as a cartridge to the .30-30, on balance the .30-30 is more than good enough, and having seven shots and no magazine to lose would tip the balance for me in favor of a Marlin or Winchester.   Moreover, due to the fact that the Marlin and Winchester are out there in the millions, in every conceivable condition, spare parts are easy to find.  Though there is always a concern about denting the magazine tube, it is pretty easy to buy a spare and put it away for the future, or to tap out the dent with the proper size brass rod.


   The Marlin is very easy to take apart.  Very easy to replace parts yourself.  The BLR simply cannot be taken apart and put back together except by a very very experienced person, and some gunsmiths won't even do it.  The rack and pinion bolt system is a wonderful piece of engineering, it is also cursed with complexity.


  For a pure hunting rifle, go with the BLR (if you can live with the high gloss, plastic type finish, that gives you a white streak every time you scuff it).  Otherwise, go with the Marlin or Winchester.  Personally, I vote Marlin.




  Hope this helps.


Mannyrock


 
blue lives matter

Offline flmason

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 746
Re: BLR vrs. ???
« Reply #11 on: May 24, 2013, 06:07:42 AM »
ill take the other side of the argument and say if you wanted a tactical lever gun a clip fed gun would be hands down better. Guy could keep 4 extra mags in pouches and reload alot faster. As to loosing mags our soldiers have been using mag fed guns for over 50 years and if tube fed was better in combat im sure we would have gone that way. Sure the mags arent cheap but id bet the typical civilan who buys an ar has 300 bucks worth of stuff hanging off of it
Flmason,


    I think you said in your other posts that you were actually interested in a lever as a semi-tactical, shtf rifle.   Though the BLR is a pretty good gun, I don't believe it fits the bill as well as a Marlin or Winchester.   


   Maximum capacity is 4 rounds.    Detachable magazine can be lost, and replacements costs alot of money.  ($70 or so).


   Though the .308 is superior as a cartridge to the .30-30, on balance the .30-30 is more than good enough, and having seven shots and no magazine to lose would tip the balance for me in favor of a Marlin or Winchester.   Moreover, due to the fact that the Marlin and Winchester are out there in the millions, in every conceivable condition, spare parts are easy to find.  Though there is always a concern about denting the magazine tube, it is pretty easy to buy a spare and put it away for the future, or to tap out the dent with the proper size brass rod.


   The Marlin is very easy to take apart.  Very easy to replace parts yourself.  The BLR simply cannot be taken apart and put back together except by a very very experienced person, and some gunsmiths won't even do it.  The rack and pinion bolt system is a wonderful piece of engineering, it is also cursed with complexity.


  For a pure hunting rifle, go with the BLR (if you can live with the high gloss, plastic type finish, that gives you a white streak every time you scuff it).  Otherwise, go with the Marlin or Winchester.  Personally, I vote Marlin.




  Hope this helps.


Mannyrock


 

Yes, I'm not opposed to box mags. I like them. Back in the days when I had a Mini-14 I definitely had a few of the hi cap ones. Personally I prefer military and para-military designs all the way around in most cases. Usually tougher guns, few parts and screws etc.  And well, box or detatcable box adds back in the ability to use spitzers, so not a bad thing.

My real wondering here was how good or bad is the actual action mechanism in the BLRs?  You don't hear as much discussion about them.   

As I've found out since I started my research on lever guns... apparently a screwdriver is the most important reliability accessory for a lever gun, well at least the Marlins, but I'm guessing the '94 has a many screws as well.  Compared to a bolt gun's 2 screws it seems a different ball game. Been 15+ years since I had an M1 or Mini-14, etc. But I seem to recall field stripping routine was a lot less complex.

Offline mannyrock

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2081
Re: BLR vrs. ???
« Reply #12 on: May 24, 2013, 06:57:52 AM »
Flmason,


  Buddy, I just don't know where you get your information.  :-)  A Marlin 336 is about these easiest firearm to maintain that has ever been invented.  If you use a pull through type barrel brush, then there is almost no reason to ever "field strip" it. If you ever need to take it apart, then simply removing that one short screw in the lever boss allows the lever to drop out, and you can them pull the bolt out by hand.  What in the world could be easier?  I have known people that have shot their Marlins for 20 years and never needed to take it apart.

   I think you may be actively, furtively, searching for a solution to a problem that just doesn't exist.  Relax!

Mannyrock



Offline flmason

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 746
Re: BLR vrs. ???
« Reply #13 on: May 24, 2013, 12:39:38 PM »
Flmason,


  Buddy, I just don't know where you get your information.  :-)  A Marlin 336 is about these easiest firearm to maintain that has ever been invented.  If you use a pull through type barrel brush, then there is almost no reason to ever "field strip" it. If you ever need to take it apart, then simply removing that one short screw in the lever boss allows the lever to drop out, and you can them pull the bolt out by hand.  What in the world could be easier?  I have known people that have shot their Marlins for 20 years and never needed to take it apart.

   I think you may be actively, furtively, searching for a solution to a problem that just doesn't exist.  Relax!

Mannyrock

Just trying to know first, buy second these days. Did it the other way around when I was young, LOL! :)

Unfortunately this "frenzy" thing is making some of the guns I'd like to get as NIB, harder. Case of bad timing.

Just look at any K98 Mauser full strip video and compare it to any lever gun full strip. I've owned the milsurps... none of them seem as convoluted as the lever guns in this respect.

In all honesty, as a kid my hands made guns rust something awful, So I tend to take a gun down to every last part for cleaning after every outing.  So for me, ease of complete teardown is a comparison point.

This gent illustrates the loose screws problem at time

http://www.youtube.com/watch?v=XYa1X5qYEbo

I mean, that's lame compared to a typical military bolt gun or a semi auto up too about the M14 or so, no? A loose loading gate screw locks up the gun?

I counted about 6 screws there. My Mosin has two, I think, LOL! My former M1 I seem to recall only had a big cross point on the gas tube. I'd have to think about it. Haven't handled one in over 15 years.

Anyway, just design comparisons basically. Trying to know what's what, LOL!

Ultimately guns aren't cheap (though more value for the dollar than a lot of things to be sure) and ideally should be something you can bet your life on, so's just kinda studying them, seeing what other folks know.

Offline mannyrock

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2081
Re: BLR vrs. ???
« Reply #14 on: May 25, 2013, 08:24:56 AM »



  Thirty years of shooting Marlin 336s, never had a screw come loose, not once.


  The loose screw, however,  IS a factor, with one screw on the side of the Marlin 1894.  It goes all of the way through the receiver and is threaded into the opposite side of it.  You have to put locktite blue on it to keep it from coming loose. And even then, after every 100 shots or so, you will see it loose.


  Of course, as you know, lever action sporting rifles are not combat guns, so you are comparing apples to oranges when you compare them to a Mauser 98.  Short of sitting in a wet trench in France, though, I would take the lever action any day of the week.  :-)


Best, Mannyrock

Offline flmason

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 746
Re: BLR vrs. ???
« Reply #15 on: May 26, 2013, 10:49:49 PM »



  Thirty years of shooting Marlin 336s, never had a screw come loose, not once.


  The loose screw, however,  IS a factor, with one screw on the side of the Marlin 1894.  It goes all of the way through the receiver and is threaded into the opposite side of it.  You have to put locktite blue on it to keep it from coming loose. And even then, after every 100 shots or so, you will see it loose.


  Of course, as you know, lever action sporting rifles are not combat guns, so you are comparing apples to oranges when you compare them to a Mauser 98.  Short of sitting in a wet trench in France, though, I would take the lever action any day of the week.  :-)


Best, Mannyrock

That's interesting, I haven't learned the differences in the Marlin models yet.

Since I consider any rifle something that may (and hopefully never) have to be used for "combat" (most likely civil disturbance here in So. Cal like the '92 riots), I don't feel it's out of line to ask... "How does a lever gun stack up to the alternatives for serious hard use?"

Some folks like to say, "Lever guns were the original assault rifle."

But then 1973 Colt's were also called "Single Action Army", so no doubt times and technology changes.

One of the side thoughts here is, "Since some rifles have ot be California Legal anyway, how good is a lever gun as an alternative to the SKS's and such?"

I find it hard to accept the idea of forking out for say an M1A and having to accept a "Ca. Legal" version. Or even an SKS with the bayonette removed and other such bull... I'm probably not going to be able to get some of the firearms I'd really like to have.

Apparently even some S&W double action revolvers aren't legal here because they were never submitted for "approval". It's kind of nutty here. I miss the days when I was young and it was cash and carry, to be sure.

Offline Blackhawk44

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 981
Re: BLR vrs. ???
« Reply #16 on: May 27, 2013, 07:50:30 PM »
I've worked with six BLR's since 1974 and three are still with me.  They are not for the tinkerer who enjoys tearing their guns down to the last screw.  It is very difficult to get the gearset reassembled and really should not be attempted by even the advanced tinkerer.  I have never had a problem with spray cleaners and brushes for the action and a brass muzzle protector to clean the bore from the muzzle.  Those in my safe have been here since 1974, 1983 and 1985 and have yet to develop a problem from that treatment and are definitely the pieces that I grab as I hit the door.  Short action BLR's are just as short and easy to handle as the Win 94 or Marlin 336 yet handle more effective cartridges.  I could go on, but that's just my experience.

Offline flmason

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 746
Re: BLR vrs. ???
« Reply #17 on: May 29, 2013, 05:42:32 PM »
I've worked with six BLR's since 1974 and three are still with me.  They are not for the tinkerer who enjoys tearing their guns down to the last screw.  It is very difficult to get the gearset reassembled and really should not be attempted by even the advanced tinkerer.  I have never had a problem with spray cleaners and brushes for the action and a brass muzzle protector to clean the bore from the muzzle.  Those in my safe have been here since 1974, 1983 and 1985 and have yet to develop a problem from that treatment and are definitely the pieces that I grab as I hit the door.  Short action BLR's are just as short and easy to handle as the Win 94 or Marlin 336 yet handle more effective cartridges.  I could go on, but that's just my experience.

Interesting. Definitely makes me want to go track down an exploded view.

For me though, if it's basically a gun with a sealed hood, probably not for me.

I do like the military concept of being able to strip and repair a gun with minimal tools.

For example the thinking that went into the Springfield, K98, Mosin, Enfield, M1, M14, AK, AR, etc. really appeal to me. Though I find the AR a little over done. But you get the idea.

The thing BLR I was looking at that really caught my eye was the old time blueing.  Talk about nice work. :)

Offline chefjeff

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 472
Re: BLR vrs. ???
« Reply #18 on: May 30, 2013, 08:17:11 AM »
Guess what/ When I came to the end of my lever action trail,I ended up with an older BLR in .308. Sold several wins and marlins.Best gun,imho.

Offline pastorp

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4697
  • Gender: Male
Re: BLR vrs. ???
« Reply #19 on: May 30, 2013, 09:13:01 AM »
Flmanson,

Easy solution to your delima about prohibited guns in California. Move to a more gun friendly state.

But I do agree your not making a lot of sense comparing lever action hunting rifles with military weapons. A marlin, Winchester, or BLR will last you a lifetime of hunting and never need a repair unless your careless. In 1971 I bought the first BLR I saw and hunted that gun as my main hunting gun for 25 years. Never a bit of trouble.

Regards,
Byron

Christian by choice, American by the grace of God.

NRA LIFE

Offline flmason

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 746
Re: BLR vrs. ???
« Reply #20 on: May 31, 2013, 11:46:49 PM »
Flmanson,

Easy solution to your delima about prohibited guns in California. Move to a more gun friendly state.

But I do agree your not making a lot of sense comparing lever action hunting rifles with military weapons. A marlin, Winchester, or BLR will last you a lifetime of hunting and never need a repair unless your careless. In 1971 I bought the first BLR I saw and hunted that gun as my main hunting gun for 25 years. Never a bit of trouble.

Regards,

My interest and the object of considering lever guns is nothing other than finding a less expensive alternative to the AK's, SKS's etc. That also is of sufficient caliber for hunting up into larger game. I'd rather press a fighting gun into hunting than the other way around. I'd think the logic of that should hold up to daylight?

For me the military spec is the one to compare to... for all guns. A gun (to me) is something I need to be able to bet my life on in as many conditions as possible. It's a serious tool, a killing machine, and it's design and implemention should be serious, and flawless. (Of course those are all ideals.)

OK, so if a lever gun isn't up to that spec, fair conclusion. But I think the above standard is a fair and correct one.  What is the point of any gun that you can't use even under the worst conditions, i.e. battle?

Oh yeah, I know sport hunting and such. I mean I realize a lightweight firearm for "one good shot" is as good a design spec as any.  I perhaps was of the mistaken belief that lever guns were designed when guns were just that serious.

But the sporting standard is not my personal standard, in all honesty.  In fact, the single most disappointing gun I've ordered and purchased recently is an M77 Ruger All Weather. That silly whippy light contour barrel is, well, ridiculous in my mind. Otherwise it's a good gun. But everything that makes it a "sporter" in my mind is s strike against it. But NIB battle rifles aren't being made anymore, at least not that civilians can buy. And something like the GSR seems to be out of stock until 2014, at least if Marlin, Ruger, et al, are telling it straight on thier backlog. And well, my choice of distributors have run out.

So, I can't order up a new in box, stainless 30-06, Springfield, for example. For obvious reasons, high cap is out in Ca. so the M1A's and similar are out (beside being out of budget). So lever gun seemed like a reasonable area to explore given they are from a time when rifles were for real use, not cowboy matches and such.

As for California... another one of those "6 of one, half dozen of the other" situations. Best weather anywhere other than Florida. But ridiculous over regulation, and insane cost of living.

I agree, I'd like to get out of this regulatory and cost of living zone.... but I never want to live in snow again. Nor do I want a lot of the problems that are in say, Old Dixie, and or any major city, no matter where it is. So I'm kind of stuck.

Like most combinations of "ideal" we all desire, they don't generally exist for working class folks.  But that's a whole other discussion.

In any event, I'm seriously careful with my firearms. I don't beat on them or anything close to it. Any lever gun under my care will probably outlive me. But I want the designs to be a solid as possible either way. I prefer to have unused capacity, it's the best insurance, I'd think.

To me a lever gun is an alternative to other guns I'd rather have, in all honesty. If it doesn't hit the marks after careful examination, OK, no worries. It can just be crossed off the list. But one has has to do the examination first. Especially if you are like me... have never owned a lever gun. :)

Anyway, FWIW, I sprang for a 336 in 30-30.

Really wanted the SS 45-70, but none of my personal choice of distributor have any. So I said, WTH... let's try the blue 30-30. Quick check of Cast Bullet loading data said to me..."Mmmm OK but not great... would still prefer the 45-70 in this type of gun.... more energy due to bullet weight at lower velocites and no gas check... but will have to wait until the factories catch up."

In all reality if they weren't so pricey, just as a collectible, I'd like to have a Win. 1886.

As for the BLR... that part about "gunsmith only" puts me off. But they do seem to be very high quality, like most if not all Brownings.

So it's not all for naught. I made a decision. If this "frenzy" thing etc. weren't going on, I perhaps could've come closer to ideal.