« previous next »
Pages: [1]   Go Down

Author Topic: Chinese clone  (Read 1392 times)

0 Members and 1 Guest are viewing this topic.

Offline Buster95

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 172
  • Gender: Male
Chinese clone
« on: June 11, 2013, 01:27:09 PM »
Just received my Dominion Arms Backpacker 12GA today, made in China off course, the finish is rough, the action is very tight, 13" barrel. All metal including the trigger guard and the forend spacer, not bad for a $150 gun!












Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Chinese clone
« Reply #1 on: June 11, 2013, 01:34:49 PM »
An illegal shotgun, barrel is 5" too short for me to own!  :o

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Buster95

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 172
  • Gender: Male
Re: Chinese clone
« Reply #2 on: June 11, 2013, 01:42:57 PM »
They are legal in Canada  ;)
Logged

Offline a4beltfed2000

  • Trade Count: (16)
  • A Real Regular
  • ****
  • Posts: 593
Re: Chinese clone
« Reply #3 on: June 11, 2013, 01:47:31 PM »
would love to only spend 150 on a short barreled gun, but alas our 200.00 tax stamp on those would make it a 350.00 dollar gun. :-X  I know, iknow I could move but then I would have to leave my M2 50 cal behind.... :-[
Logged
H&R/NEF 10, 12,16 20 28 ,410 .243 45 357 45lc. 1919a4, uzi, sten mK 2,3,5 M2HB, 1917a1, ak74(2) amd 65, RPK (2) 11 aks and 50 other guns....

Offline jpshaw

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1063
  • Gender: Male
Re: Chinese clone
« Reply #4 on: June 18, 2013, 02:14:23 AM »
I'm afraid if I owned that 13" barreled shotgun my next photograph would look very much like Busters Avatar.   BTW Buster does that shotgun have any choke in it?
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Chinese clone
« Reply #5 on: June 18, 2013, 02:28:53 AM »
That is considered  "any other weapon " barrel over 12 inches but under  18 inches and can be fired only one time per barrel before reloading. Fee may only be 5 bucks can't remember. Check out the ATF site.
Logged
If ya can see it ya can hit it !

Offline Glassman66

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
Re: Chinese clone
« Reply #6 on: June 19, 2013, 06:41:32 AM »
Quote from: SHOOTALL on June 18, 2013, 02:28:53 AM
That is considered  "any other weapon " barrel over 12 inches but under  18 inches and can be fired only one time per barrel before reloading. Fee may only be 5 bucks can't remember. Check out the ATF site.


Its $200 plus an additional $5 transfer fee.

Randy
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Chinese clone
« Reply #7 on: June 19, 2013, 06:46:10 AM »
Quote from: Glassman66 on June 19, 2013, 06:41:32 AM
Quote from: SHOOTALL on June 18, 2013, 02:28:53 AM
That is considered  "any other weapon " barrel over 12 inches but under  18 inches and can be fired only one time per barrel before reloading. Fee may only be 5 bucks can't remember. Check out the ATF site.


Its $200 plus an additional $5 transfer fee.
 
Thanks couldn't remember ........

Randy
Logged
If ya can see it ya can hit it !

Offline Airsporter

  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 893
  • Gender: Male
Re: Chinese clone
« Reply #8 on: June 19, 2013, 11:08:20 AM »
Quote from: Buster95 on June 11, 2013, 01:27:09 PM
Just received my Dominion Arms Backpacker 12GA today, made in China off course, the finish is rough, the action is very tight, 13" barrel. All metal including the trigger guard and the forend spacer, not bad for a $150 gun!
I'm impressed with the detachable forend and the metal trigger guard/spacer for $150!  How's the checkering look?
Logged

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: Chinese clone
« Reply #9 on: June 19, 2013, 03:33:38 PM »
Just curious, would the stock fit on a Handi?
 
Would any other parts (barrel, metal trigger guard, etc.) from that gun fit a Handi?
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline wolverine_1

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 364
  • Gender: Male
Re: Chinese clone
« Reply #10 on: June 19, 2013, 05:11:50 PM »
Wish they sold one here that had a legal length barrel.
Logged
Gene

Offline Buster95

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 172
  • Gender: Male
Re: Chinese clone
« Reply #11 on: June 20, 2013, 10:36:39 AM »
Quote from: jpshaw on June 18, 2013, 02:14:23 AM
I'm afraid if I owned that 13" barreled shotgun my next photograph would look very much like Busters Avatar.   BTW Buster does that shotgun have any choke in it?

No choke.
Logged

Offline Buster95

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 172
  • Gender: Male
Re: Chinese clone
« Reply #12 on: June 20, 2013, 10:39:08 AM »
Quote from: OldSchoolRanger on June 19, 2013, 03:33:38 PM
Just curious, would the stock fit on a Handi?
 
Would any other parts (barrel, metal trigger guard, etc.) from that gun fit a Handi?

I don't know because I don't have any Handi.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Chinese clone
« Reply #13 on: June 20, 2013, 10:52:50 AM »
Quote from: Buster95 on June 20, 2013, 10:39:08 AM
Quote from: OldSchoolRanger on June 19, 2013, 03:33:38 PM
Just curious, would the stock fit on a Handi?
 
Would any other parts (barrel, metal trigger guard, etc.) from that gun fit a Handi?

I don't know because I don't have any Handi.

You don't have any handy(available) or any Handis? What happened to your BC? It has the same frame and barrel parts as a Handi, it would be easy to try the forend on the BC.  ;) Not that it really makes any difference for anyone in the US since it couldn't be sold here, parts  availability is another matter.

Tim

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Buster95

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 172
  • Gender: Male
Re: Chinese clone
« Reply #14 on: June 20, 2013, 02:04:19 PM »
Quote from: quickdtoo on June 20, 2013, 10:52:50 AM
Quote from: Buster95 on June 20, 2013, 10:39:08 AM
Quote from: OldSchoolRanger on June 19, 2013, 03:33:38 PM
Just curious, would the stock fit on a Handi?
 
Would any other parts (barrel, metal trigger guard, etc.) from that gun fit a Handi?

I don't know because I don't have any Handi.

You don't have any handy(available) or any Handis? What happened to your BC? It has the same frame and barrel parts as a Handi, it would be easy to try the forend on the BC.  ;) Not that it really makes any difference for anyone in the US since it couldn't be sold here, parts  availability is another matter.

Tim

Tim I sold my BC but I will buy another one (or a regular handi in 45-70) for sure I still have the metal spacer for it ;)
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Chinese clone
« Reply #15 on: June 20, 2013, 02:05:06 PM »
 ;D
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Chinese clone
« Reply #16 on: June 21, 2013, 02:51:58 AM »
Quote from: a4beltfed2000 on June 11, 2013, 01:47:31 PM
would love to only spend 150 on a short barreled gun, but alas our 200.00 tax stamp on those would make it a 350.00 dollar gun. :-X  I know, iknow I could move but then I would have to leave my M2 50 cal behind.... :-[

beltfed,
 
Stop by my place on the way to the Frozen North and drop off your Ma Deuce.  I will keep her nice and warm for you. ;)
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Buster95

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 172
  • Gender: Male
Re: Chinese clone
« Reply #17 on: June 22, 2013, 05:12:18 AM »
The spacers are definitively not interchangeable  ;D




Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Chinese clone
« Reply #18 on: June 22, 2013, 05:26:58 AM »
 :o ;D Thanks!

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline 45-70.gov

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 7009
  • Gender: Male
Re: Chinese clone
« Reply #19 on: June 22, 2013, 07:17:37 AM »
looks like the old style snap on forend

Logged
when drugs are outlawed only out laws will have drugs
DO WHAT EVER IT TAKES TO STOP A DEMOCRAT
OBAMACARE....the biggest tax hike in the  history of mankind
free choice and equality  can't co-exist
AFTER THE LIBYAN COVER-UP... remind any  democrat voters ''they sat and  watched them die''...they  told help to ''stand down''

many statements made here are fiction and are for entertainment purposes only and are in no way to be construed as a description of actual events.
no one is encouraged to do anything dangerous or break any laws.
Pages: [1]   Go Up
« previous next »