« previous next »
Pages: [1]   Go Down

Author Topic: 375-08 handi  (Read 864 times)

0 Members and 2 Guests are viewing this topic.

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
375-08 handi
« on: February 02, 2014, 03:11:14 AM »
Got dies and 243 barrel in mail yesterday. Sized a few 308 brass. Pretty easy to do with one pass. Thought it would be a little tougher but the ch4d die set has a long tapered expander ball in it. 243 Barrel locked up perfect on a frame I had. So its off to jes reboring with a dummy round on Monday. What is his turnaround time like on a rebore?
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 375-08 handi
« Reply #1 on: February 02, 2014, 03:34:47 AM »
What are you guys with the 358 Winchesters shooting with in cast bullets. Looking for a bullet to try and keep it in the neck and still crimp in crimp groove. Looking for about a 275 grain bullet.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 375-08 handi
« Reply #2 on: February 02, 2014, 03:43:56 AM »
This looks like a good candidate. Fairly short from base to crimp groove.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: 375-08 handi
« Reply #3 on: February 02, 2014, 04:00:36 AM »
Jason,
  In the 358\356, I like the 190gr RD boolit. I got some from a kind-hearted member here for my Max and found they work quite well in the 356. Perhaps they made a .375 bullet of similar design.

Jes' turnaround time has been 2-3 weeks.

Thanks, Dinny
Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 375-08 handi
« Reply #4 on: February 02, 2014, 05:41:37 AM »
I've sent three barrels to Jesse for reboring/rechambering, first two came back in a week from the day I shipped to him, the third took longer, but it was cuz he was waiting for the other two barrels he was gonna do at the same time with the rented reamer.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline LAB55

  • GBO Supporter
  • Trade Count: (14)
  • Member
  • *****
  • Posts: 97
  • Gender: Male
Re: 375-08 handi
« Reply #5 on: February 03, 2014, 02:20:33 AM »
Jason, what rate of twist did you decide to go with?
Logged

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 375-08 handi
« Reply #6 on: February 03, 2014, 02:30:33 AM »
He never told me what twist it was going to be. I told him I was going to shoot 250-300 grain cast out of it. What would be a good twist for it?
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline 300 tc

  • Trade Count: (0)
  • Member
  • *
  • Posts: 10
Re: 375-08 handi
« Reply #7 on: February 03, 2014, 02:39:33 AM »
RD makes a 235 gr gc for the 375 and is a great bullet. These can be bought from Carolina cast bullets.
Logged

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 375-08 handi
« Reply #8 on: February 03, 2014, 02:42:51 AM »
I just order this mold from accurate molds. It is 35 cal but I am having it cut at 378 diameter for this rifle. Should end up about 260-270 grain
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 375-08 handi
« Reply #9 on: February 03, 2014, 02:45:56 AM »
The nose after the crimp groove will be at .366 for a bore rider.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: 375-08 handi
« Reply #10 on: February 03, 2014, 02:57:55 AM »
I just love to see custom modifications to our Handis.  It highlights their versatility and I hope H&R takes notice.  I'm sure Brian does.  I'm not knocking lever guns or other actions, but if it were not in a single shot, most of our wild ideas wouldn't work.  I couldn't have a Maxi or .445 in a Marlin.  I gotta hug my Handis.

Pete


Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 375-08 handi
« Reply #11 on: February 03, 2014, 05:19:04 AM »
Quote from: LAB55 on February 03, 2014, 02:20:33 AM
Jason, what rate of twist did you decide to go with?

Just looking on ammoguide it looks like all 375 calibers are 1-12.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline FW Conch

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 404
  • Gender: Male
Re: 375-08 handi
« Reply #12 on: February 03, 2014, 05:32:04 AM »
 ???  That chambering doesn't leave much shoulder for head spacing. Any thoughts on how that could be addressed ?


Thanks-Good Luck/Good Shooting  :) 
Logged
Jim

Offline LAB55

  • GBO Supporter
  • Trade Count: (14)
  • Member
  • *****
  • Posts: 97
  • Gender: Male
Re: 375-08 handi
« Reply #13 on: February 03, 2014, 05:48:04 AM »
Quote from: Jason F on February 03, 2014, 05:19:04 AM
Quote from: LAB55 on February 03, 2014, 02:20:33 AM
Jason, what rate of twist did you decide to go with?

Just looking on ammoguide it looks like all 375 calibers are 1-12.


That's how he did my 375 whelen
Logged

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 375-08 handi
« Reply #14 on: February 03, 2014, 06:13:43 AM »
Quote from: FW Conch on February 03, 2014, 05:32:04 AM
???  That chambering doesn't leave much shoulder for head spacing. Any thoughts on how that could be addressed ?


Thanks-Good Luck/Good Shooting  :)

That's when it will get a rim cut and switch to 307 or 356 brass.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline FW Conch

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 404
  • Gender: Male
Re: 375-08 handi
« Reply #15 on: February 03, 2014, 07:04:24 AM »
 :D  Bingo!  Now your talkin! With that method you could even take it to 400/356!  All Handi's should have "rims"!


 8)   "Just Sayin"
Logged
Jim

Offline garbhead

  • GBO Supporter
  • Trade Count: (114)
  • A Real Regular
  • *****
  • Posts: 960
  • Gender: Male
  • For every Goliath, there is a stone.
Re: 375-08 handi
« Reply #16 on: February 03, 2014, 07:10:59 AM »
Could you rebore a 308 to get this wildcat? Or not enought meat to work with?
Logged
12g shortie w/chokes,Tamer .410,12g "Buck" slug gun w/20g extra barrel, 12g smooth bore tracker I, 45/410 w/22vp matched set, 7mm-08, .308 20",

my avatar pic is my 1960 Rambler I bought in 1972 for $175..6 banger 3-on-the-tree...drove it for 5 yrs  22mpg.. was "hot-rodding" (LOL) one night...tore out 1st/reverse gear. Drove it that way for 2 yrs(with no reverse and only 2nd and high)  Had to really plan ahead when parking.
sold it for $125
Do not argue with an idiot. He will drag you down to his level and beat you with experience.--Mark Twain

Politicians should only be allowed one term in office, then one term in jail.

Offline LAB55

  • GBO Supporter
  • Trade Count: (14)
  • Member
  • *****
  • Posts: 97
  • Gender: Male
Re: 375-08 handi
« Reply #17 on: February 03, 2014, 09:01:06 AM »
Should work with a 308 barrel
Logged

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 375-08 handi
« Reply #18 on: February 03, 2014, 09:14:54 AM »
Jes told me diameter of bore plus .200" is minimum muzzle diameter.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline nanuk-O-dah-Nort

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 701
Re: 375-08 handi
« Reply #19 on: February 03, 2014, 03:10:58 PM »
a properly sized case will have NO Problems HSing off the shoulder
 
a 375-08 will have 25thou shoulders
 
a 35rem only has a 10thou shoulder.... 
Logged
Pages: [1]   Go Up
« previous next »