« previous next »
Pages: [1]   Go Down

Author Topic: New receiver/soule sight for my BC  (Read 625 times)

0 Members and 1 Guest are viewing this topic.

Offline Onesetoftracks

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
  • Gender: Male
  • One set of tracks and a buffalo rifle!
New receiver/soule sight for my BC
« on: February 08, 2014, 05:32:47 PM »
Here's my latest and greatest sight for my BC.  I call it a receiver/soule sight!  It has 180 MOA adjustment for elevation, 10 MOA each way for windage, a 1" eye cup, and "NO EXPOSED SCREWS" that can be dinged up by accident.  That's the only thing I don't like about the vernier and soule sights on the market, so I designed my own.  I made every part, including the adjustment screws with my trusty, dusty Sherline lathe and mill.  Hope you like the pics!!
Logged
"The only thing necessary for the triumph of evil, is for good men to do nothing."   Edmond Burke

"I say we take off and nuke the site (Washington, DC) from orbit!  It's the only way to be sure."   Ripley

Offline Lefty Dude

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 221
  • Gender: Male
Re: New receiver/soule sight for my BC
« Reply #1 on: February 08, 2014, 06:15:04 PM »
Very Nice, I like. 8) ;D
Logged

Offline Onesetoftracks

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
  • Gender: Male
  • One set of tracks and a buffalo rifle!
Re: New receiver/soule sight for my BC
« Reply #2 on: February 08, 2014, 06:43:50 PM »
Other things I forgot to mention---  The sight is based on the Kelley Offset sight, with a soule sight lower.  The reason it's on the left side is, I shoot left-handed.  I'm right handed, but I injured my eye when I was three, and I've been shooting lefty ever since I could pick up a rifle or bow.  At bottom, the sight is dead on at 125 yards, and I use the factory .584 front sight.  With 180 MOA elevation, I can go out past 1150 yards with my trapdoor load.  Can't see that far, but my ballistics program says I can shoot that far.  LOL

Rob
Logged
"The only thing necessary for the triumph of evil, is for good men to do nothing."   Edmond Burke

"I say we take off and nuke the site (Washington, DC) from orbit!  It's the only way to be sure."   Ripley

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: New receiver/soule sight for my BC
« Reply #3 on: February 08, 2014, 06:49:44 PM »
Really a very cool, albeit slightly bulky looking sight.  Is it aluminum, brass, and copper?  Was curious as to the weight, also.  I've never really liked the bigger eye cup style aperatures, but with a Merit #4 hunting disk size it'd be pretty cool.  8)  I wonder if you did the upright from steel if it could be a little smaller in diameter.  Very good work though.  It'd be neat to try it out on a range some day.  :)
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline Onesetoftracks

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
  • Gender: Male
  • One set of tracks and a buffalo rifle!
Re: New receiver/soule sight for my BC
« Reply #4 on: February 08, 2014, 07:01:37 PM »
It's made of brass and aluminum.  The upright is a piece of 1/2 inch 6061-T6, large knobs were 5/8.  Lower was 5/8 round brass, base started as 3/4 round brass.  All other parts were smaller diameter brass or aluminum.  Control screws were turned down from 1/4 inch brass.  The weight is a little 2.9 ounces.  The first one I made was all brass and was 4.3 ounces and had no adjustment screws(manual).  I don't know if you could get a screw inside anything smaller that 1/2 inch.  The sight is only 3.5 inches from to to bottom and 2.5 from side to side.  Oh, and I've tried it on the range, and shot .98 inches, 3 shots at 125 yards.  Shoots great!!!!!!

Rob
Logged
"The only thing necessary for the triumph of evil, is for good men to do nothing."   Edmond Burke

"I say we take off and nuke the site (Washington, DC) from orbit!  It's the only way to be sure."   Ripley

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: New receiver/soule sight for my BC
« Reply #5 on: February 08, 2014, 07:04:27 PM »
Nice.  8)  Love the adjustment and such.  If the diameter of the upright could be reduced slightly, would look less bulky perhaps.  Great job though, you make me want to get a lathe.  lol
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline jeepmann1948

  • GBO Supporter
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 1422
  • Gender: Male
  • San Angelo, Texas
Re: New receiver/soule sight for my BC
« Reply #6 on: February 08, 2014, 11:39:46 PM »
Very nice work!!!!!!!!!!!
An excellent sight for the Black Powder long range shooters!!!!!!
George
Logged
"it ain't what you shoot em with......................
  it's where you hit em "

Offline aussiebobcash

  • Trade Count: (0)
  • Member
  • *
  • Posts: 14
  • Gender: Male
Re: New receiver/soule sight for my BC
« Reply #7 on: February 09, 2014, 12:49:04 AM »
Very Nice!! ;D
Logged
Pages: [1]   Go Up
« previous next »