Author Topic: I've been Doing Some Tractor Work  (Read 902 times)

0 Members and 2 Guests are viewing this topic.

Offline Drilling Man

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3635
I've been Doing Some Tractor Work
« on: June 05, 2021, 09:57:50 AM »
  I have a customer friend who has a cabin 50 miles from me, every summer he hires me to do all kinds of tractor work there.  There's LOTS of work there that he wants done, but so far I've just been rotary cutting.

  Here I am, all loaded up ready to go,



  and it will take several days to cut all that he wants cut, but here's a start,



  Anyway, here's the cabin,



  and as you can see, I have a LOT more cutting to do!

  DM

Offline DDZ

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 6168
  • Gender: Male
Re: I've been Doing Some Tractor Work
« Reply #1 on: June 05, 2021, 12:00:09 PM »
I'm sure you are looking forward to doing the mowing. I never considered mowing with a brush hog work. I find it to be a pleasant pastime.
Those people who will not be governed by God will be ruled by tyrants.    Wm. Penn

Offline Drilling Man

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3635
Re: I've been Doing Some Tractor Work
« Reply #2 on: June 05, 2021, 12:59:25 PM »
  My brush hog has a quite high "tip speed", so it mows grass pretty good.  BUT, this rough ground, so a finish mower is out of the question, plus I've been taking out quite a few white pine tree's with the mower too...

  I have to say though, doing anything day after day becomes work, even tractor driving...

  DM

Offline Ranger99

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 9581
Re: I've been Doing Some Tractor Work
« Reply #3 on: June 05, 2021, 01:21:49 PM »
It's about the only time I have
any serenity any more.
As long as my cheeks hold out,
I could go for hours and days
18 MINUTES.  . . . . . .

Offline Doublebass73

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4579
Re: I've been Doing Some Tractor Work
« Reply #4 on: June 05, 2021, 03:44:55 PM »
  My brush hog has a quite high "tip speed", so it mows grass pretty good.  BUT, this rough ground, so a finish mower is out of the question, plus I've been taking out quite a few white pine tree's with the mower too...

  I have to say though, doing anything day after day becomes work, even tractor driving...

  DM

White pines grow like weeds where I live.
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves."

---- William Pitt (the Younger), Speech in the House of Commons, November 18, 1783

Offline DDZ

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 6168
  • Gender: Male
Re: I've been Doing Some Tractor Work
« Reply #5 on: June 06, 2021, 01:03:36 AM »
Speaking of white pines I have a number of them around my place, and they are around 100 feet tall, and very straight.  I believe they were planted here in the 40's by FDR's CCC. I have had some of them come down, but it is truly amazing how they can handle high winds. There have been a few very high winds here over the years, and I wonder what keeps them from coming down or snapping off. Its amazing how much bend they have in high winds.
Those people who will not be governed by God will be ruled by tyrants.    Wm. Penn

Offline Drilling Man

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3635
Re: I've been Doing Some Tractor Work
« Reply #6 on: June 06, 2021, 02:40:13 AM »
  We also have a lot of white pines all around here here, they come up all over most any well drained spot.  I like them and I've planted a lot of them here on my place.

  I mill quite a few of them into construction lumber, as they make great lumber,



  DM

Offline Ranger99

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 9581
Re: I've been Doing Some Tractor Work
« Reply #7 on: June 06, 2021, 12:14:32 PM »
The ones I have are called loblolly
pines ( I think)
There are are a few long leaf
mixed in also
18 MINUTES.  . . . . . .

Offline Doublebass73

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4579
Re: I've been Doing Some Tractor Work
« Reply #8 on: June 07, 2021, 12:23:29 PM »
White pines are definitely great for lumber, it's the most common product at all the lumber mills around here.
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves."

---- William Pitt (the Younger), Speech in the House of Commons, November 18, 1783

Offline neckisred

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 394
Re: I've been Doing Some Tractor Work
« Reply #9 on: June 07, 2021, 10:44:26 PM »
Lots of work, but I could only imagine the satisfaction of making your own lumber. You sure don't seem to mind a full days work!!!!!!!

Offline Land_Owner

  • Global Moderator
  • Moderators
  • Trade Count: (31)
  • Senior Member
  • *****
  • Posts: 4526
    • Permission Granted - Land Owner
Re: I've been Doing Some Tractor Work
« Reply #10 on: June 07, 2021, 11:17:26 PM »
For 8 years I transported a tractor 535 miles one way, across three states, to "have fun", bush hog, disc, plant, and cover seed for five days on 25 acres of a 305 acre tree farm, in sun and heat of August, as wildlife food plots, then return there, sans tractor, in late October to hunt those same fields.  It was the hardest work I ever loved.

Offline Drilling Man

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3635
Re: I've been Doing Some Tractor Work
« Reply #11 on: June 08, 2021, 05:27:59 AM »
Lots of work, but I could only imagine the satisfaction of making your own lumber. You sure don't seem to mind a full days work!!!!!!!
  It's even more work when you go to the woods, cut the trees down, cut out and skid the logs out, and get them loaded up.

  Here's a load ready to pull home,



  I enjoy it, as long as I can work at my own speed.  lol

  DM

Offline mcbammer

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2249
  • Gender: Male
Re: I've been Doing Some Tractor Work
« Reply #12 on: June 09, 2021, 09:34:25 AM »
    what make of  tractor  is that ?

Offline Drilling Man

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3635
Re: I've been Doing Some Tractor Work
« Reply #13 on: June 09, 2021, 01:50:35 PM »
  AGCO, I have three of them, they have been very good tractors for me.

  With the loads at the mill, it's time to wash the logs off,



  DM

Offline mcbammer

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2249
  • Gender: Male
Re: I've been Doing Some Tractor Work
« Reply #14 on: June 10, 2021, 09:54:23 AM »
  AGCO, I have three of them, they have been very good tractors for me.

  With the loads at the mill, it's time to wash the logs off,



  DM
   The orange color thru me off ,   thats a lot of weight with no trailer brakes  , you must not have any steep grades to go down .