Author Topic: throwing knives  (Read 788 times)

0 Members and 1 Guest are viewing this topic.

Offline king nero

  • Trade Count: (0)
  • Member
  • *
  • Posts: 69
    • http://users.skynet.be/kingnero
throwing knives
« on: March 14, 2004, 11:26:34 PM »
I recently was given a set of these (three of 'em in a cordura holster)

I tried a bit of throwing with 'em at the house, and in our back garden, but it didn't work out very well (to say the least). Didn't know it was that hard to use these?
Can anyone point me out to an explanation of how to throw with 'em correctly, and how to set the movable weight?










thx in advance...

Offline dread

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 134
throwing knives
« Reply #1 on: March 15, 2004, 05:34:14 AM »
If you want to see some knife throwing try the Cold Steel Knife Co. web site. They offer videos on throwing knives and a dvd showing the guys throwing their brand of knives which I thought was really impressive. Hope this helps? Jim

Offline Joel

  • Moderator
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 933
throwing knives
« Reply #2 on: March 16, 2004, 06:12:46 AM »
In case anyone can't read Dread's reply because the JPG covers his answer(I had to use my Composer to see it), He suggests ordering a video/dvd from Cold Steel.  That's basically the same suggestion I was going to offer.  Video are available from them and also the knifesupply catalog people. Texas Knifemaker's Supply offers one by John Bailey entitled "Recreational Knife Throwing" for $19.95(plus around $7.00 S & H). Catalog # MDE05.
http://texasknife.com

Offline dread

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 134
throwing knives
« Reply #3 on: March 16, 2004, 06:05:45 PM »
Hi Joel, Thank you for the Texas Knife site. Looks like a good one. I may try to make a knife for myself. I just don't care much for the 6" grinder that I have. I was thinking of putting a metal grinding disk on my compound saw and making a "jig" to hold the steel so I wouldn't have my hands nor face near the disk. As far as the disk speed, it says it would be ok to use it on the saw. Just wondered if it would be safe enough to make a knife blade with that kind of set up?

Offline Ka6otm

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 241
throwing knives
« Reply #4 on: March 17, 2004, 12:52:03 PM »
I've never seen a throwing knife with a moveable weight before.  It's obviously to change the balance of the knife to your preference, but most throwing knives are set up 50/50, meaning the balance point is in the exact middle of the knife.  If I were you I'd take the weights off and use as is.

There are two ways to throw:
1.  Holding the handle.
2.  Holding the blade.

What you're trying to accomplish here is a controlled number of turns before striking the target.  If you hold it by the blade, you want 1/2 turn or 1-1/2 turns and so on.  If you hold it by the handle, you want 1 turn or 2 turns and so on.

Try this.  Get about 6 feet from the target, hold it by the blade to where you have about 2 inches of blade in your hand and throw it overhand.  Observe how many turns it makes before striking the target.

If it hits the target before it has made 1/2 turn, back up 1 foot or so and try again.  If it makes more than 1/2 turn at this distance, you're snapping your wrist too much.

That will get you started and as you get to where you can stick them all the time in a 3 or 4 inch bullseye, back up.

If you're throwing by the blade, triple the distance you're standing from the target and it should be just about right.

In time you'll be able to do it from all kinds of distances by changing how much of the blade you have in your hand when you throw.

My brother and I used to play darts all the time with throwing knives when we were growing up.

I still do it in my garage or backyard from time to time.  I use Hibben throwing knives, though.

Ka6otm

Offline king nero

  • Trade Count: (0)
  • Member
  • *
  • Posts: 69
    • http://users.skynet.be/kingnero
throwing knives
« Reply #5 on: March 21, 2004, 05:15:58 AM »
thx for the answers, i'll try what Ka6otm suggests.
Without the weights.
But what will be the effect of the weights? will it make the knife make less rotations, or will it just affect the speed of rotation, ....

I'll give it a go with and without, and let you know how it went.

Thx already!

Offline Ka6otm

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 241
throwing knives
« Reply #6 on: March 22, 2004, 11:41:08 AM »
This is a pure guess as I've never used a throwing knife that was intentionally unbalanced so...

I think it's going to rotate faster as you move the weights further forward toward the point.  I can't quite see the point in that as the faster it rotates, the harder it is to control distance...you don't want it flipping over very fast at all.  When I throw from about 15 feet, I get 1-1/2 turns.

Let me know how you do and watch out for the knife bouncing back at you when you're up close.  Don't want it to stick in parts of your anatomy.

Also, be sure to throw overhand and not sidearm.  You can do it sidearm but it puts another degree of difficulty in the equation due to snapping the wrist.

Oh, and use something like the end of a tree stump for a target or a bunch of 2 x 4s nailed horizontally across two vertical 2 x 4s or something like that.  Plywood sucks for this application.

Ka6otm

Offline wormbobskey

  • Trade Count: (27)
  • A Real Regular
  • ****
  • Posts: 779
  • Gender: Male
weights.
« Reply #7 on: October 02, 2004, 12:42:42 PM »
I beleive the purpose of the weights is to move the balance forward of the handle. Just about like they made the lawn darts. The head of the dart is extremely heavier than handle so that gravity takes over and the point sticks in the ground everytime. That is just my opinion on what they might be used for. I have made a few throwing knives out of disc blades and they are very tough. I also have used the disc blade that rides in front of plows that cuts the sod so the plow can flip it over. They are a little thicker than stanard disc blades and are even tougher. I make my throwers with just a little more steel up front for more penetration. Of course I am not in any way an expert so take what I say with a grain of salt.
OSTA
Lanums Animal Damage Control & Repair
We don't do bugs