« previous next »
Pages: [1]   Go Down

Author Topic: Marlin 60 jams with Remington bullets  (Read 2104 times)

0 Members and 1 Guest are viewing this topic.

Offline FallingCrows

  • Trade Count: (0)
  • Member
  • *
  • Posts: 31
  • Gender: Male
Marlin 60 jams with Remington bullets
« on: April 05, 2004, 03:33:19 AM »
Anyone have any advice about a problem I'm have with my Marlin (Glenfield) 60.

I had a box of Remington Golden .22LR 36 gn. hollow point bullets.
After 5 or 6 shots the bullet would get caught between the bolts and the barrel.  Occasionally I can get though all 14 shots without any problems.
I took the gun completely apart and clean all the gunk and oil off.
Then used Remingtons Drylube, but it still would jam.

I don't think it was the bullets. Because I used them in a Nylon 66 and had no problems.  But I must admit, the bullets were old.  How old? I don't exactly know.

Do you think it might be the spring in the tube?
Or Maybe I should change brand of bullets.

I finished the box off and bought a box CCI's standard and Mini-Mag HV.
Looking forward to see how these work out.

What do you think about Winchester's .22LR bullets?

thanks,
skunkie
Logged
I love the smell of Black Powder in the Fall

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Marlin 60 jams with Remington bullets
« Reply #1 on: April 05, 2004, 04:11:28 AM »
You are correct in your assesment of the problem, try changing bullets, some guns like one brand/style better than others....<><.... :grin:
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline ironglow

  • GBO Supporter
  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 31348
  • Gender: Male
Marlin 60 jams with Remington bullets
« Reply #2 on: April 05, 2004, 05:33:54 PM »
Yup Skunkie...
   Try changing ammo, that may very well be the answer. If the jams continue, try solid points; sometimes the hollow point hangs up..
try Stingers, sometimes the action needs a slightly snappier recoil to work effectively.
  Your choice of CCI Mini-mags was a good one, Winchester rounds are good. Many folks swear by Win power points.

  Keep us posted.
Logged
If you don't want the truth, don't ask me.  If you want something sugar coated...go eat a donut !  (anon)

Offline Huntinbull

  • Trade Count: (0)
  • Member
  • *
  • Posts: 36
Marlin 60 jams with Remington bullets
« Reply #3 on: April 10, 2004, 01:52:22 AM »
Winchester Power Points are probably not a good choice for the model 60. It is finicky about that blocky bullet shape, and will probably FTF (fail to feed) those big hollowpoints. Just my experience with the slick little semi.
Huntinbull
Logged
Certified Hunters Ed and Trappers Ed In Ohio.
Keep your powder dry and your eye on the skyline.

Offline FallingCrows

  • Trade Count: (0)
  • Member
  • *
  • Posts: 31
  • Gender: Male
CCI bullets
« Reply #4 on: April 12, 2004, 02:19:32 AM »
Hey,
I tried the CCI bullets.   :grin:
The only jammed once while using the Standard Velocity.
It never jammed on the Mini Mags.
I'm going to try the Winchester.  Just to see the difference.
Thanks for the help
- skunkie
Logged
I love the smell of Black Powder in the Fall

Offline FallingCrows

  • Trade Count: (0)
  • Member
  • *
  • Posts: 31
  • Gender: Male
update to jamming problem
« Reply #5 on: April 20, 2004, 03:08:00 AM »
Hey,

I picked up some Winchester Standard velocity bullets, and they jam too.
But not when I use the CCI mini mags.
Next I'll be trying the Remington Thunderbolts and a box of Winchester Wildcats.

that is all,
skunkie
Logged
I love the smell of Black Powder in the Fall

Offline haroldclark

  • Trade Count: (13)
  • Contributor
  • ***
  • Posts: 460
Skunkie
« Reply #6 on: April 21, 2004, 11:26:29 AM »
Your jamming is beginning to sound more like a bolt spring being too stiff for the standard velocity loadings.

I have a S&W Model 41 22 and it will jam with Remington 22s all of the time.  Winchester target loads work just great.

Harold Clark
Logged

Offline FallingCrows

  • Trade Count: (0)
  • Member
  • *
  • Posts: 31
  • Gender: Male
Still Jams!
« Reply #7 on: April 26, 2004, 02:35:24 AM »
I tried Winchester Wildcats and Remingtion Thunderbolts.  The rifle still jams with both bullets. So it looks like I'm going to be using CCI Mini Mags.

The Remingtons are JUNK! Not only did they Jam, but every ten or so would misfire. Now I have 500 rounds of crap I don't want!  :x  :x  :x

The spring being to stiff is a good thing, right?
Maybe the rifle, even though its 25+ years old, was never really used that much.

I bought a polishing wheel for my grinder.  So I'm going to see if polishing some of the rifle parts will helps.

- skunkie
Logged
I love the smell of Black Powder in the Fall

Offline flamenblaster

  • Trade Count: (0)
  • Member
  • *
  • Posts: 55
Marlin 60 jams with Remington bullets
« Reply #8 on: April 14, 2005, 02:27:26 AM »
ive had nothing but good experience in model 60 with rem 40 solids..but not with hollowpoints..golden bullet loads..viper i think..just sucked..and mini mags just didnt seem very accurate at all..thunderbolts are just a rem. promotional packaging..same round as standard high velocity 40 gr solid loads..same way rem. game loads and viper are just regular 36 gr hp in different box. every gun is a lil different as i had a model 25??..dont remember the model  # exactly but was basicly a 60 clip fed instead of tube..it worked best with mini mags..and hated rem. ammo. Just gotta match your bullets to your gun and feed em what they like :grin:
Logged
Good friends will come, and good friends will go...but jerks will just accumulate.

Offline Charles/NM

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 166
  • Gender: Male
Marlin 60 jams with Remington bullets
« Reply #9 on: April 18, 2005, 05:41:17 PM »
I've have three model 60's.  All of them perform well with Winchester Dynapoint and T-22.  They are most accurate with Wolf Match Extra ($$$). They don't feed blunt nose Win XPert.
Logged

Offline USA Varminter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
Marlin 60 jams with Remington bullets
« Reply #10 on: April 19, 2005, 07:42:14 PM »
is the loaded bullet not chambering?  Or is it a stovepipe where you look straight into an empty case.  Stovepipes are most often caused by too little energy to cycle.  You could lighten the bolt, the bolt spring, or possibly the hammerspring, depending it could cause too light a strike to fire the round.
Logged

Offline ngzcaz

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Marlin 60 jams with Remington bullets
« Reply #11 on: November 07, 2005, 01:53:20 PM »
Remmington does not work in my Ruger handgun either. Try the
Federal copper HP. Several hundred thru my Model 60 SB w/ no
problems at all.   :?
Logged

Offline camsdaddy

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 147
  • Gender: Male
Marlin 60 jams with Remington bullets
« Reply #12 on: November 08, 2005, 01:00:45 AM »
I also had problems with the rem. I have found that Fed bulk pack fire wonderfull.
Logged

Offline slayer

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 937
Marlin 60 jams with Remington bullets
« Reply #13 on: November 08, 2005, 02:12:25 PM »
Wow, I never realized how finicky semis are. My Marlin 881 shoots everything well, especially the CCI Mini Mag Solid Points, great on Squirrels and small game, nice clean hole since it isn`t a hollow point. The Rem thunderbolt solids also shoot very well, but not being plated, they almost take a squirrels clean off!! I always wanted a model 60, but we can`t use them to hunt here in PA, it`s illegal :( Jack.
Logged

Offline ngzcaz

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Marlin 60 jams with Remington bullets
« Reply #14 on: November 09, 2005, 02:12:15 AM »
I live in Pa as well. Haven't hunted in about 25 years, last I knew it
was OK for a semi for big game but not for small game even if it was loaded for a smaller capacity.
   Never really thought about it but that would mean you coudnt use a
60 for crows or groundhogs ?  What a same if thats true. Back to Remington bullets, the ones I used had a great deal of wax on them
which I believe was enough to screw up my Ruger's cycling te next
round.   :-)
Logged

Offline slayer

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 937
Marlin 60 jams with Remington bullets
« Reply #15 on: November 09, 2005, 12:09:19 PM »
I too have noticed the Rem Thunderbolts are waxy, but since mine is a bolt, no problems. No Semis for Deer either, only shotguns for small game and waterfowl. Heck, in certain management areas, you can use a .22 for small game and chucks, but not for Turkeys, makes no sence. The PA Game Commision has some crazy rules that makes no sence. I myself, I am waiting for the day I can use a Crossbow for Deer. Jack.
Logged
Pages: [1]   Go Up
« previous next »