« previous next »
Pages: [1]   Go Down

Author Topic: Stock Bolts  (Read 670 times)

0 Members and 1 Guest are viewing this topic.

Offline Cottonwood

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 2780
  • Gender: Male
  • "Capturing the moment, to last a lifetime"
Stock Bolts
« on: April 06, 2004, 05:30:08 AM »
I would just like to know the stock bolt dimensions or diameter.  Anyone have theirs out and can check for me.

I'm getting the tang ready to bore for the stock bolt, and my son made off with my extentions for my socket set.  :oops:
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Stock Bolts
« Reply #1 on: April 06, 2004, 05:52:32 AM »
The bolt is 4 3/8 inches long, 3/8 inch in diameter, 9/16 hex head bolt, it is threaded for 1 1/8 inches with what appears to be a 24 pitch thread (24 threads to the inch). Also the hole bored in the back section of the stock, nearest the buttplate is 7/8 inch in diameter. Approximately 3/8" to 1/2" of threaded bolt is exposed where it threads into the receiver. The hole bored for the bolt itself is also a 3/8 (+ a hair) since the bolt is a nice smooth snug fit in it.  Hope this helps....<><.... :grin:
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Cottonwood

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 2780
  • Gender: Male
  • "Capturing the moment, to last a lifetime"
Stock Bolts
« Reply #2 on: April 06, 2004, 06:05:51 AM »
MSP Ret

This helps greatly... I'm having my brass tang bored out my a shop and I needed the dia of that bolt to have it done.  This is a project I'm doing on my Buffalo Classic so that a Soule sight can be installed to fit proper.  I'll send you an e-mail with the pics.

Jon
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Stock Bolts
« Reply #3 on: April 06, 2004, 06:26:16 AM »
Got them Jon, That is going to be one slick rig....<><.... :grin:
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
Stock Bolts
« Reply #4 on: April 06, 2004, 07:43:58 AM »
Montanan
You're really gonna make me miss mine when you get this done :( , sometimes I do stupid things like that.
Logged
God, Family, and guns, in that order!
Pages: [1]   Go Up
« previous next »