Author Topic: need bullet drop info on cva pro optima muzzel loader (Read 802 times)

martyrd · « **on:** April 08, 2004, 09:47:37 AM »

guys. i have a new cva pro optima. 50 cal. 29 INCH BARREL. i am going to sight it in this weekend. i will be using 777 powder, 245 power built bullet. i am going to sight it in at 50 yards with a 3 x 9 scope on it. what kind of bullet drop will i have at 100 , 150, 200 yards if i 0 it at 50 yards ? just looking for a rough idea. it will save me some time on the bench. thanks. marty mdo3059680@aol.com

RandyWakeman · « **Reply #1 on:** April 08, 2004, 12:36:56 PM »

Marty,

You really have to shoot it to know. :eek:

Bob_K · « **Reply #2 on:** April 08, 2004, 03:18:24 PM »

You'll need to specify a muzzle velocity in order to calculate the drop at various ranges, also the height of the scope above the bore centerline, and the ballistic coefficient of your bullet. Any number of ballistic programs can calculate it with that minimal data.

RandyWakeman · « **Reply #3 on:** April 09, 2004, 05:27:19 AM »

Bob K is of course correct.

What I've found to be easy is just to shoot at 5 yards, and adjust until you are horizontally dead on, and very slightly high (1/4" or so). That should get you on the paper at 100 yards.

I also use a lot of paper. :roll:

simonkenton · « **Reply #4 on:** April 09, 2004, 04:16:17 PM »

If you zero it at 50 your drop at 200 will be considerable.
Since you have a 3x9 scope you are capable of long distance shooting. I suggest you zero it at 100, at the least. This would only put you a little high at 50. Most guys zero a couple inches high at 100, this would put you in good shape out to near 150, but still can hold dead on at 50 and kill the deer.

martyrd · « **Reply #5 on:** April 13, 2004, 04:32:47 PM »

thanks for the info. marty