Author Topic: Increase Ejector tension (Read 1089 times)

kbee · « **on:** April 12, 2004, 05:39:15 PM »

Ok, I just got a new 7mm-08 and it won't eject a fired case at all!!! Yes, I cleaned the ejector/chamber area even took it apart. I also polished the ejector release and ejector. The ejector spring seems just to weak. Is there a replacement..?

Haywire Haywood · « **Reply #1 on:** April 12, 2004, 10:20:10 PM »

Did you polish the chamber? This helps a lot of times. Convienently, there is a thread just down the page with a how-to.

Good luck,
Ian

marv · « **Reply #2 on:** April 13, 2004, 12:16:58 AM »

Kbee, There is a man that came on one of the sites that has
springs to add that helps on eject problems, I got a set for
a rifle that I had ejection problems.

His name is Mark Forbord
E-mail mpforbord@eagleengr.com
or mprbord@netzero.net

His price was $4.00 shipped I think
Marv.

like2shoot · « **Reply #3 on:** April 13, 2004, 12:18:18 AM »

Try mpforbord@eagleengr.com for the extractor and ejector springs. I think they are around $5.00 for both. Good luck.

marv · « **Reply #4 on:** April 13, 2004, 12:21:39 AM »

like2 shoot you missed a letter in your e-mail address you
just posted, not emgr but engr marv

dpastor · « **Reply #5 on:** April 13, 2004, 09:52:02 AM »

Just a thought.

This is a new gun? Are the 7-08's reloads? If so are they fully resized? I had the same problem with my 45-70 handi. The first rounds I fired had been neck resized only and used in another rifle. You may be "wedging" the rounds slightly as you close the action.

BIG JAKE · « **Reply #6 on:** April 13, 2004, 10:57:33 AM »

I had the same problem with a 243. Sent it back and they replaced the whole barrel assembly. Ejects fine now.

like2shoot · « **Reply #7 on:** April 13, 2004, 04:54:25 PM »

:oops: Marv, thanks for the heads-up. It was a typo, too early in the morning ? We posted at about the same time and I started to delete mine. I still think it's a great site where everyone tries to help. I have learned much here.

marv · « **Reply #8 on:** April 13, 2004, 05:14:22 PM »

Lik2 hunt, I didn't mean to Cut you short, Just trying to help some body
out, I know i wouldn't want to get wrong info.
For the man asking I order 2 sets of boaster springs they $4.00 a set
included shipping . They smell to help on my 219 Zip. Marv.

like2shoot · « **Reply #9 on:** April 14, 2004, 12:06:15 AM »

:-) Marv, I took it the way you intended. It's all good. No offence taken on this end.

kbee · « **Reply #10 on:** April 16, 2004, 02:23:15 PM »

Thank's guys

I'll have to order some. I got it working good now. :grin: ..Just replaced the spring kicks out fine. Oh and yes I'm using factory ammo not reloading for it yet.