« previous next »
Pages: [1]   Go Down

Author Topic: TC Renegade - load?  (Read 1719 times)

0 Members and 1 Guest are viewing this topic.

Offline Darwyn

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
TC Renegade - load?
« on: April 29, 2004, 04:32:46 PM »
I have a TC Encore 209-50 and realize it will handle magnum (150 grain) loads.  I am looking at a used TC Renegade but cannot find a manual or information at the TC web site regarding the max. load.  How many grains of ffg is specified in the users manual for the Renegade?

Darwyn
Logged

Offline lostid

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 420
TC Renegade - load?
« Reply #1 on: April 29, 2004, 04:44:47 PM »
120.
Logged
i'm a realist. i've not seen it all, but man ,,I've Been Around the block once or twice

Offline Primer

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 129
TC Renegade - load?
« Reply #2 on: April 30, 2004, 05:48:35 AM »
Darwyn,

Looking in my reprint 9/1/88 T/C manual,that came with my Renegade some years back, it lists the following Max Charges for FFg Black Powder:

.50 cal Round Ball ( 175gr):............110 gr FFg

.50 cal Maxi-Ball (370gr) & Maxi-Hunter (355gr);............100 gr FFg
Logged

Offline crow_feather

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1359
TC Renegade - load?
« Reply #3 on: April 30, 2004, 06:27:19 AM »
Darwyn,
If you weren't welcomed on you first post, let me take the chance to welcome you now.  

Please remember that some substitutes vary in power and max is not always the best with patched round ball.

I wish you the best with your shooting

C F
Logged
IF THE WORLD DISARMED, WE WOULD BE SPEAKING THE LANGUAGE USED BY THE AGGRESSIVE ALIENS THAT LIVE ON THE THIRD MOON OF JUPITOR.

Offline Ladobe

  • Trade Count: (91)
  • Senior Member
  • *****
  • Posts: 3193
TC Renegade - load?
« Reply #4 on: May 01, 2004, 03:53:02 AM »
Quote from: Primer
Darwyn,

Looking in my reprint 9/1/88 T/C manual,that came with my Renegade some years back, it lists the following Max Charges for FFg Black Powder:

.50 cal Round Ball ( 175gr):............110 gr FFg

.50 cal Maxi-Ball (370gr) & Maxi-Hunter (355gr);............100 gr FFg


Just to add to Primer's info:  same book (mine is a mint original copy though  :wink: ) the 50 RB load is listed at 2135 FPS and 1883 FtLbs; the 50 Maxi load 1418 FPS and 1652 FtLbs - both with DuPont BP and BOTH IN THE HAWKEN.   Back then (1978) the Renegade only came in 54 cal if I remember right, and only in 50 now since its rebirth (correct me if I am up in the night on this pards).   All that said, "max" is seldom the best load in any frontstuffer anyway , so start lower and find your sweet spot.   At Rondy's I only give the 54 Renegade RB 50-60 of 2F and it is plenty accurate enough at the ranges normally shot.
Logged
Evolution at work. Over two million years ago the genus Homo had small cranial capacity and thick skin to protect them from their environment. One species has evolved into obese cranial fatheads with thin skin in comparison that whines about anything and everything as their shield against their environment. Meus

Offline Darwyn

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
TC Renegade Load
« Reply #5 on: May 10, 2004, 02:51:58 PM »
Sorry I've been off line for a while.  Thanks for the welcome.  I went back and had another look at the Renegade.  It comes with two barrels.  The longer is 1:66? twist with it printed on the side.  The shorter one doesn't have the twist rate on it.  Both are stamped as actual TC barrels.  Any idea what the twist rate might be on the shorter one?  I looked at the bore in both barrels and they look clean but I am not sure what the rifling should look like - could you tell by a visual regarding wear or is this apt to be an issue if there isn't any corrosion?
Logged

Offline crow_feather

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1359
TC Renegade - load?
« Reply #6 on: May 10, 2004, 04:55:18 PM »
you have to shoot a lot of loads to wear out a t/c barrel.  Take a lubed tightly patched jag on your ramrod and put it down the barrel.  Mark the ramrod next to the front sight and at the end of the barrel  Then pull the ramrod out letting it rotate until the mark is on the opposite side of the site.  measure the length of the rod removed from the barrel and times two

C F
Logged
IF THE WORLD DISARMED, WE WOULD BE SPEAKING THE LANGUAGE USED BY THE AGGRESSIVE ALIENS THAT LIVE ON THE THIRD MOON OF JUPITOR.

Offline ogemakw

  • Trade Count: (0)
  • Member
  • *
  • Posts: 31
TC Renegade - load?
« Reply #7 on: May 11, 2004, 12:29:01 AM »
the unmarked barrel is most likely 1:48 as I believe all renegades were. the  1:66 is an accessory barrel for shooting roundball, though the 1:48 shoots roundball well too.
Logged
Pages: [1]   Go Up
« previous next »