Author Topic: Is it safe to shoot a cast bullet in barrel with a...  (Read 888 times)

0 Members and 1 Guest are viewing this topic.

Offline HHI 812

  • Trade Count: (6)
  • Contributor
  • ***
  • Posts: 360
Is it safe to shoot a cast bullet in barrel with a...
« on: May 25, 2004, 09:17:12 PM »
brake/compensator. Have a single shot pistol, and thinking of some light/moderat cast bullet loads.

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Is it safe to shoot a cast bullet in barrel
« Reply #1 on: May 26, 2004, 01:20:05 AM »
Generally yes.  You will find that you'll have some cleaning issues.  In some cases (as with the Cutts compensator on Thompson SMG's) the baffles are thin and occasionally one will get broken.  Shouldn't have any problem with the types that have holes bored into them (vs. the slots).
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline Gun Runner

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1140
  • Gender: Male
Is it safe to shoot a cast bullet in barrel
« Reply #2 on: May 26, 2004, 03:04:58 AM »
Dont know ifin this will help but when my gunsmith ported my 1895ss he cut 3 horz. slots on each side, then backed bored the bbl one or two thousants to just behind the ports to prevent shaving lead. My 45/70 dosent know what a jacketed bullet is, and havant had any probs. with lead shavings.

Gun Runner

Offline The Cast Bullet Kid

  • Trade Count: (0)
  • Member
  • *
  • Posts: 82
  • Gender: Male
Is it safe to shoot a cast bullet in barrel
« Reply #3 on: May 26, 2004, 03:17:25 PM »
ABSOLUTELY.
I had a purpose built .32-20 made around a martini .22cal action.
I fitted a .303 British barrel and shoot subsonic cast bullets in wheel weight from 115-175gr through a silencer.
I works a treat, is dead quiet and there is no problem with the suppressor.
Cheers

Jeff

Offline HHI 812

  • Trade Count: (6)
  • Contributor
  • ***
  • Posts: 360
TCBK-what kind of twist do you have?
« Reply #4 on: May 26, 2004, 05:49:42 PM »
I have a little 9" stainless 300 Whisper T/C, that has shot more 1/4MOA groups than any other firearm I've ever owned. But all the bullets were the 240 Sierra MK. I considered getting a heavy mold made, but was concerned that the 1:8 twist would strip the bullet? Also heard that a tear drop bullet design works better at the subsonic velocities? Also considered making a .17 Whisper, shooting the 37 grain bullet, but wasn't sure what kind of twist I needed? No practical use I know, but would be a neat little Whisper.  :D

Offline The Cast Bullet Kid

  • Trade Count: (0)
  • Member
  • *
  • Posts: 82
  • Gender: Male
Is it safe to shoot a cast bullet in barrel
« Reply #5 on: May 27, 2004, 02:11:25 PM »
HHI:
If you want a whisper bullet try Jim Allison at http://www.castbulletengineering.bigpondhosting.com/default.htm
He has one.
Cheers

Jeff