Author Topic: powder charge  (Read 423 times)

0 Members and 2 Guests are viewing this topic.

Offline bubba45

  • Trade Count: (0)
  • Member
  • *
  • Posts: 19
powder charge
« on: May 31, 2004, 01:23:23 PM »
i just purchased a t/c pennsylvania hunter cap lock... i see on web sites that the pyrodex pellets are "recommended for inline" muzzlers. can i use those pellets in a percussion lock rifle?
be what you are doing

Offline willysjeep134

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 362
powder charge
« Reply #1 on: May 31, 2004, 03:18:23 PM »
They might be harder to ignite, especially with the fire coming at them from the side and the smaller flash from a standard cap. Mabey HotFlash caps might help. I don't trust pyrodex any ways. I allways have more trouble with it than with regular black FFg.
If God wanted plastic stocks he would have made plastic trees.

Offline lostid

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 420
powder charge
« Reply #2 on: May 31, 2004, 05:34:54 PM »
hey willy?? last i saw T/C still uses a paten breech,aka: snail,,and the fire comes from the back.(kinda through a little curvey hole,)(like a snail?) :D

 bubba45,,you can use pellets if ya want/have too, but they don't suit that rifle best,,a loose powder will give you the oppertunity for a wider range of load development and thus greater accuracy in the long run. The slow twist (1-66) of your T/C Penn. was made for ball shooting,, don't get me wrong,,your not limited to just ball shooting, but money spent on the new plastic saboted pistol bullets for that gun could be simply marked up as a learning experiance. : :shock: .
 If you can't find true bp in your area,,spend the extra money on Triple777 2F loose powder,,a little extra driving and/or a little extra cash spent on the proper powder will sure help out now!!

Good luck,,best wishes to ya,,
i'm a realist. i've not seen it all, but man ,,I've Been Around the block once or twice

Offline bubba45

  • Trade Count: (0)
  • Member
  • *
  • Posts: 19
powder charge
« Reply #3 on: June 01, 2004, 01:50:43 PM »
thanx
be what you are doing