« previous next »
Pages: [1]   Go Down

Author Topic: Can jacketed bullets be patched  (Read 1074 times)

0 Members and 1 Guest are viewing this topic.

Offline lostchild

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
Can jacketed bullets be patched
« on: January 12, 2003, 09:58:03 AM »
I have a .45 colt/410 barrel can I patch .430 jacketed bullets up to .452 and have them shoot safely in this bbarrel  ?  Thanks in advance  lost
Logged

Offline JBMauser

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 391
PP small bullet to fill bore.
« Reply #1 on: January 13, 2003, 03:45:55 PM »
I am not an expert and am learning PP myself but I think your bullet is to small to start.  The Bullet should just ride on the lands of the barrel.  I would think you bullet would just drop through the barrel freely.  The paper should be the thickness of the diff between the lands and the bore.  If you could bump up your bullet a bit it could work.  Hope this helps.  JB
Logged

Offline Castaway

  • Moderator
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1105
  • Gender: Male
Patching Jacketed Bullets
« Reply #2 on: January 16, 2003, 01:53:40 AM »
They can be patched, but I'm not sure you'll get the accuracy you want by going up 0.022".    :shock:
Logged
Pages: [1]   Go Up
« previous next »