Author Topic: Antique rifle  (Read 594 times)

0 Members and 1 Guest are viewing this topic.

Offline teech

  • Trade Count: (0)
  • Member
  • *
  • Posts: 29
Antique rifle
« on: August 04, 2004, 04:42:03 PM »
Picked up an oldtimer 45 cal recently,wondering if anyone would have any info on this rifle.Here is what I know about it so far.
45 cal. 1 1/16" hex barrel.Tiny german silver front sight,tiniest notch rear.
 Beautiful set triggers,short length of pull,crescent butt.Weighs 15lbs.
Rifling---7 lands,deep groove-----1in35 twist.
barrel was  made by J.Wilt Dayton O
Gunsmith was Sweitzer.
Any info would be greatly appreciated,----Teech

Offline crow_feather

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1359
Antique rifle
« Reply #1 on: August 05, 2004, 04:13:34 AM »
First let me say welcome to GBO.  What it sounds like, with the faster twist barrel and the heavier weight, is that this is a target rifle.  

C F
IF THE WORLD DISARMED, WE WOULD BE SPEAKING THE LANGUAGE USED BY THE AGGRESSIVE ALIENS THAT LIVE ON THE THIRD MOON OF JUPITOR.

Offline filmokentucky

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 535
  • Gender: Male
Antique rifle
« Reply #2 on: August 05, 2004, 04:45:14 AM »
Teech-You mght try asking Harry Hunter at Muzle Blasts magazine. Send your question to:
                        Harry Hunter, care of:
                        Muzzle Blasts
                        P.O. Box 67,
                        Friendship, IN 47021
  Harry writes the Sighting In column wherein he helps people with information on old firearms. Send him everything you have on your rifle and even some photographs; it all helps.
N.M.L.R.A. Member
T.M.A. Member
N.R.A. Endowment Life Member

Offline teech

  • Trade Count: (0)
  • Member
  • *
  • Posts: 29
Antique rifle
« Reply #3 on: August 13, 2004, 06:40:43 PM »
Thanks gents for the info,Crow feather, I was thinking the same thing,And Filmokentucky I'll fire a letter off to Muzzleblasts,cheers nessy.

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Antique rifle
« Reply #4 on: August 13, 2004, 10:28:59 PM »
Hex Barrel?

Octagon barrel?

Offline teech

  • Trade Count: (0)
  • Member
  • *
  • Posts: 29
Antique rifle
« Reply #5 on: August 14, 2004, 06:05:38 AM »
Thanks Double D,it's Octagonal.

Offline flintlock

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1405
  • Gender: Male
Antique rifle
« Reply #6 on: August 14, 2004, 06:48:55 AM »
Would love to see a pic...How long is the barrel?? Is it tapered, or straight??? What type of lock? Back action??? Converted to percussion??
Is the back of the lock rounded or tapered??? Does it have a patchbox?? and what shape is it??? Really hard to give details without some good pics, or more info...Would love to see...Thanks...flintlock

PS...Is all of the furniture brass??? or iron??

Offline teech

  • Trade Count: (0)
  • Member
  • *
  • Posts: 29
Antique rifle
« Reply #7 on: August 14, 2004, 07:56:27 AM »
The rifle now belongs to The Gunworks Oregon,there is a story that goes with that,next time.
35" straight Oct. barrel
Back action lock--Neff Wanton half cock had been filed off(no fly)
Original percussion---brass furniture--pewter forend
No patch box--not sure about the back of the lock.One screw thrugh the stock and one screw through half a hole on the same side of the lock at the bottom,it has quite a drop in the stock,although the lop was very short I could shoot it better than my other rifles.
When I bought it it had a bad crack right through the stock,from almost the wrist to the breech plug,had that repaired,all told it had cost me $110.00 I've asked Joe to send me a photo which I'll post.cheers Teech.