Author Topic: Who makes strong scope Rings? (Read 480 times)

Pookee · « **on:** August 23, 2004, 02:49:03 AM »

I see on some guns in pictures having 3 rings holding a scope.
I was mounted with some B-Squares with a Ken Light base and the scope moved forward.
What is the solution? Glue the scope to the rings? Better rings?
Also is the Weaver 92A a good way to go?
Thanks in advance!
George[/b]

skb2706 · « **Reply #1 on:** August 23, 2004, 04:38:13 AM »

To get the full benefit from using a three ring setup I would go with having an extra pair of base mounting holes drilled and tapped. I like a Weaver 92A 6 hole and three ring setup. IMO most all major manufacturers make rings that are plenty strong enough if properly installed and aligned.

444encore · « **Reply #2 on:** August 23, 2004, 04:57:34 AM »

I've found that Millet rings are rock solid on a Weaver style base. Plus they come furnished with friction tape for that extra bite on a glossy scope.

EdK · « **Reply #3 on:** August 23, 2004, 03:47:22 PM »

You'll want to be sure to ream and/or lap the rings so the assembly remains stress-free and the scope-to-ring contact area is maximized. This will go a long way to assure both scope longevity and a solid, no-slip installation.

PS - GB always recommends the Burris rings with the plastic inserts :-)

drichi · « **Reply #4 on:** August 23, 2004, 03:57:56 PM »

I stopped my scope from walking with a piece of sticky back paper in the bottom of each ring. The kind that you find on sticky notes paper. dave

smoky · « **Reply #5 on:** August 24, 2004, 04:07:50 AM »

The Warne Maxima vertical split rings are made of steel and serve me well.

Smoky