« previous next »
Pages: [1]   Go Down

Author Topic: 32-40 hi wall  (Read 1221 times)

0 Members and 1 Guest are viewing this topic.

Offline Longknife

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
32-40 hi wall
« on: January 19, 2003, 09:16:18 PM »
I have a winchster ser # list , I can look it up to determine the year of manuf. There are some VERY EXPENSIVE tang sights on the market, and are made to shoot at VERY LONG ranges but I wonder if your "worn" rifling will do them justice?  On the other hand some decent sights are made in Italy wich may be more to your liking Around $50.00. Most are made on 1.510" centers, (are there holes already drilled?)  Many gun shops carry these. As for loads, I don't shoot a 32-40! BUT WISH I DID!!!
Logged
More powder-more lead-BIG GUNS kill dead!!!!!!!

Offline hillbill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3285
32-40 hi wall loads and age info
« Reply #1 on: January 20, 2003, 01:28:07 PM »
hey longknife! thanks for the input! my ser. no is 1122x. far as i know my great grandpa purchased this gun when my grandfather was small{he is now 95}i have no idea if it was new or used at that time. your prob right bout the tang sight but it would look cool on there! any info on the age would be appreciated! happy huntin all!
Logged

Offline Longknife

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
32-40 hi wall loads and age info
« Reply #2 on: January 20, 2003, 09:08:50 PM »
Hey, thats a low #, 3rd year of production, 1887, they were produced until 1918, 130,000 made!! If yuor interested I have a Vernier tang sight, Italian repro that I mounted on a rifle and NEVER used it, $40.00 post paid, let me know! Longknife
Logged
More powder-more lead-BIG GUNS kill dead!!!!!!!

Offline First Shirt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 48
32-40 hi wall loads and age info
« Reply #3 on: January 21, 2003, 06:38:15 AM »
Hillbill, you can get a NEW Lyman #2 tang sight that fits your rifle without having to drill any new holes for about $73, or a Marble's for $125 from Buffalo Arms.  I think the Lyman was a factory option on a lot of them old Winchesters, and it is a good hunting tang sight.  No reason a peep wont work with a blade front sight, all the US Army's M16's have a peep and post, which is the same thing.  You can reach Buffalo Arms on line, or call 208-263-6953.

Greg
Logged

Offline First Shirt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 48
32-40 hi wall loads and age info
« Reply #4 on: January 22, 2003, 05:04:04 AM »
On the 85 Winchester, the rear tang screw (the one that goes all the way through the stock) is used as the means to secure the rear of the tang sight.  The front hole should be 2 3/16" in front of the tang screw.  Some rifles need a replacement tang screw that is a tiny bit longer to mount the tang sight, and some sight manufacturers supply them...some don't.

Greg
Logged

Offline marlinman93

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 849
tang sight
« Reply #5 on: January 24, 2003, 05:33:41 PM »
Check Cape Outfitters for their vernier tang sight repro for your Low Wall!
 They have one there for $59.95 that is an exact repro of the original. They don't come with the longer tang screw, so you'll need to buy one for $5 through gunpartsspecialist.com I got one for my Hi Wall and it is very nicely finished!
Logged
Ballard, the great American Rifles!
Pages: [1]   Go Up
« previous next »