Author Topic: Reloading question about 375h&h (Read 760 times)

Questor · « **on:** September 20, 2004, 03:39:22 PM »

Does the 375H&H need to be crimped? I notice that a lot of the bullets have a cannelure. What's the best way to crimp it? I didn't see instructions in my manuals that said it should be crimped, but I thought I should ask anyway.

jackfish · « **Reply #1 on:** September 21, 2004, 03:24:30 AM »

I crimp the 375 H&H with a Lee Factory Crimp die. No muss, no fuss.

crow_feather · « **Reply #2 on:** September 21, 2004, 04:34:24 AM »

I don't crimp my bullets and have not found any problems with not crimping. This also allows me to vary the bullet seating depth without problem.

C F

Questor · « **Reply #3 on:** September 21, 2004, 05:15:20 AM »

Crow_feather:

Thank you for all the responses. I appreciate that.

oso45-70 · « **Reply #4 on:** September 21, 2004, 08:25:47 AM »

Questor,
I use a Lee crimp die on most of my loads just to be on the safe side. With the magazine fully loaded the bullets may creep a little. Better to be safe than sorry. Stay safe......Joe..........