« previous next »
Pages: [1]   Go Down

Author Topic: Taking advantage of long throat 454 barrel  (Read 687 times)

0 Members and 2 Guests are viewing this topic.

Offline MePlat

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 601
Taking advantage of long throat 454 barrel
« on: January 21, 2003, 05:46:12 AM »
Have any of you guys used a 405 gr Remington 45/70 bullet or a 500-525 gr cast bullet in your guns?  The long throat will allow this because you can seat them so much futher out.
Logged
You Know Me.  I Don't Have a Clue

Offline handcannon

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
NO NO NO
« Reply #1 on: January 21, 2003, 06:11:35 AM »
The 454 is .451 to .452 diameter and the 45/70 is .457 to .458 diameter.Unless you use cast bullsets and you swag them down.

  Wade :eek:  :eek:  :eek:
Logged
Wade
   GOOD SHOOTING
   GOOD HUNTING

Offline MePlat

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 601
Taking advantage of long throat 454 barrel
« Reply #2 on: January 21, 2003, 07:12:50 AM »
Sorry my mistake I know the sizes are different and assumed that others did too.  Yes you have to size down the 405 grainer and also the 400 gr Speer. the jackets are thin and will size down easily in a cast bullet sizer.  Along with the cast bullets for the 458 and 45/70.  The loads can be qiute powerful in a 12 inch gun. Also with relativly small charges compared to the 45/70.
Logged
You Know Me.  I Don't Have a Clue

Offline handcannon

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
You never know
« Reply #3 on: January 21, 2003, 08:07:00 AM »
You never know who is going to read these threads.Might give someone a idea that is bad.

   Wade
Logged
Wade
   GOOD SHOOTING
   GOOD HUNTING

Offline Selmer

  • Trade Count: (6)
  • A Real Regular
  • ****
  • Posts: 684
How do i swage them down?
« Reply #4 on: January 21, 2003, 08:38:42 AM »
How do I swage the bullets down?  I assume need to buy some sort of die that would fit in my Rockchucker to do it, it sounds like a good idea to me.
Selmer
Logged
"Next to the glory of God, music deserves the highest praise"-Martin Luther
Any homo sapien with the proper chromosomes can be labeled a father, but it takes a man to be called "Daddy"-unknown

Offline MePlat

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 601
Taking advantage of long throat 454 barrel
« Reply #5 on: January 21, 2003, 11:42:04 AM »
I use a cast bullet sizer to size the bullets down.  Works very well.  I use case lube on the 405 Jacketed Remingtons and the 400 gr Speers.
Logged
You Know Me.  I Don't Have a Clue

Offline thomas

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 159
No need to go to that trouble
« Reply #6 on: January 21, 2003, 01:41:53 PM »
hard cast bullets up to 395 gr are avalible for the .451-.452 bore.
I think two manf. are out thier for you needs.
Tom
Logged

Offline captainkirk

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 112
Sizer die
« Reply #7 on: January 22, 2003, 01:48:03 AM »
Lee makes one that will fit in your press.  They offer several popular diameters and just about any reasonable diameter on a custom basis.  Maybe 15$ plus some lube...  I have used them with great success for the 44 pistols.

Kirk
Logged
Phil 4:13   I can do all things through Christ who strengtheneth me.
Pages: [1]   Go Up
« previous next »