Author Topic: 375 JDJ mould  (Read 595 times)

0 Members and 1 Guest are viewing this topic.

Offline Tad Houston

  • Trade Count: (37)
  • A Real Regular
  • ****
  • Posts: 738
375 JDJ mould
« on: October 21, 2004, 02:23:46 PM »
Does any one here cast for the 375 JDJ contender? What would be a good mould? On the economy end, i was wondering if the lee 375, 38/55 mould would work. It seems the bullet my be a bit big- .379- but i guess it could be sized down? Thanks- Tad
 :D

Offline jeff

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 193
375 JDJ mould
« Reply #1 on: October 23, 2004, 02:40:58 PM »
You did not indicate what you were trying to accomplish.

Lee is the only economy mold that I'm aware of and with older rifles .379 is not unreasonable.  you could always re-size down to 376 or 377 should work fine in your T/C.

Then you have RCBS and Lyman molds to consider as intermediate in cost.  Greater variety in bullet design is available thru NEI at http://www.neihandtools.com/  look at page 7 & 8.

Good luck

Offline 475/480

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 197
375 JDJ
« Reply #2 on: October 27, 2004, 03:59:45 PM »
I have 2 moulds in .376-a  245gr BRGC and a 290gr LFNGC ,these I shoot in a 375GNR same ballistics as the 375 JDJ.
The 375 GNR is a 45-70 necked down in a TC Encore -14" bll.Both of the moulds came from Dan at mountainmolds.
If you want to try some you pay shipping I will send you 30-40 each these are water dropped /WW hardness-BHN 24.
Is the JDJ on a 30-06 or 444 case.
Sean

Offline Tad Houston

  • Trade Count: (37)
  • A Real Regular
  • ****
  • Posts: 738
375 JDJ mould
« Reply #3 on: November 02, 2004, 03:33:40 PM »
375 JDJ is formed from the 444 marlin. I wouldnt mind trying some of your bullets, how much would shipping be? :D

Offline 475/480

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 197
375 JDJ mould
« Reply #4 on: November 10, 2004, 07:28:50 AM »
Sorry about the delay getting back
email me your addy I will send you some 245 gr and 290 gr CB,shipping to CA (UPS) about $ 6.00 for 4 lbs.
Sean

Offline EdK

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 499
Re: 375 JDJ
« Reply #5 on: November 10, 2004, 02:50:18 PM »
Quote from: 475/480
...a 290gr LFNGC ,these I shoot in a 375GNR same ballistics as the 375 JDJ.


Sean, I find this very interesting as  I was thinking about a LFN mould for my 375JDJ Contender. Care to talk it up?

Thanks, Ed

Offline Tad Houston

  • Trade Count: (37)
  • A Real Regular
  • ****
  • Posts: 738
375 JDJ mould
« Reply #6 on: November 10, 2004, 03:23:54 PM »
Sean, i sent an email but i dont know if it went or not. :D