« previous next »
Pages: [1]   Go Down

Author Topic: .223 Ultra sticks cases after change  (Read 608 times)

0 Members and 1 Guest are viewing this topic.

Offline boonebob

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
.223 Ultra sticks cases after change
« on: November 18, 2004, 01:35:46 PM »
Help. Using instructions on the forum I modified the ejector in my .223 Ultra. Before the rifle ejected perfectly with the only problem being trying to dig the cases out of hay fields. Now about 30% of the cases stick in the chamber. Any ideas ? Thanks
Logged

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
.223 Ultra sticks cases after change
« Reply #1 on: November 18, 2004, 01:43:44 PM »
What instructions are you referring to?
Logged
God, Family, and guns, in that order!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
.223 Ultra sticks cases after change
« Reply #2 on: November 18, 2004, 02:00:20 PM »
If you are referring to the ejector to extractor conversion, it doesn't help stuck cases, it may be worse....
http://www.graybeardoutdoors.com/phpbb2/viewtopic.php?t=46378
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline boonebob

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
.223 Ultra sticks cases after change
« Reply #3 on: November 18, 2004, 02:01:56 PM »
The one posted by silver vaquero on the old H&R Talk
Logged

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
.223 Ultra sticks cases after change
« Reply #4 on: November 18, 2004, 04:56:25 PM »
Can't solve your problem but this might help. There was a post on here
 awhile back on filing a groove in your barrel so you can use a knife or
 something similar to pop a stuck out. I did mine and first time out I had to use it. Very conveinent!!. Very easy to do as the bbl. is soft. That post is on here somewhere but I can't find it. Even had a picture.
       Come on guy's, let's help him out.
       I heard N.E.F. was going to start putting an extractor groove in.
Logged

Offline Donaldo

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 576
.223 Ultra sticks cases after change
« Reply #5 on: November 18, 2004, 05:41:30 PM »
I am not sure but I think there is something on Fred's site about the notch filed in the barrel to remove a stuck case.  In any case always take a short brass rod, less than bore dia to slide down the barrel to dislodge the stuck case.
Logged
Luke 11:21

Offline Major

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 516
.223 Ultra sticks cases after change
« Reply #6 on: November 18, 2004, 05:49:57 PM »
Yes, make sure it is brass and not steel or you could do damage to your barrel.   Like Road King said, these barrels are soft so you don’t want to scratch the bore.
Logged
Deactivated as trouble maker

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
.223 Ultra sticks cases after change
« Reply #7 on: November 19, 2004, 02:23:27 AM »
Donoldo"
      Where is FRED'S  site at????? :?  :)
Logged

Offline Fred M

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2362
    • Fred The Reloader and Wildcatter
.223 Ultra sticks cases after change
« Reply #8 on: November 19, 2004, 05:06:26 AM »
Logged
Fred M.
From Alberta Canada.

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
Tuning a HANDI
« Reply #9 on: November 19, 2004, 05:47:07 AM »
FRED:
     Thank's for info. Lot's of good info on there!!! :grin:
Logged
Pages: [1]   Go Up
« previous next »