Author Topic: TC Scout (Read 506 times)

buzzy · « **on:** December 01, 2004, 08:04:23 PM »

Can I drill out the nipple on my TC Scout to improve it. This is not a traditional type nipple & am not sure I can find a new one as the scout is no longer made & mine has a little buildup at the already very small orifice? Thanks

Keith Lewis · « **Reply #1 on:** December 01, 2004, 09:29:03 PM »

I have a nipple from the Scout that I used to own. I will check the one I have and see what drilling would do to the nipple. Answer tomorrow.

Chris · « **Reply #2 on:** December 02, 2004, 06:01:05 PM »

buzzy:

DON'T DO IT! Don't screw-up a good gun or put yourself in danger...it isn't worth it.

The TC Scout "nipple-plugs" are still around. I bought a couple last year...I believe from Wholesale Hunter.

I'll check around and holler back.

...Chris

Chris · « **Reply #3 on:** December 02, 2004, 06:31:38 PM »

Here you go buzzy....Dixie's got it listed in their catalog.

http://www.dixiegunworks.com/product_info.php?products_id=5857&osCsid=0b49a9b19d3d3bcf3d4fbb25f9b72338

Good Luck and be Safe!

...Chris

buzzy · « **Reply #4 on:** December 03, 2004, 12:50:45 AM »

Thank you guys for the advice, & where to find a new nipple.

Bob_K · « **Reply #5 on:** December 06, 2004, 06:40:57 AM »

If you are talking about using a drill, turned in your fingers, to remove the carbon build up, then ok. If you are talking about increasing the size of the vent hole, absolutely not. "Danger, Will Robinson, danger!"