Author Topic: .35 Rem Snap Caps (Read 854 times)

TMP · « **on:** December 02, 2004, 08:23:18 AM »

Does anyone know where I can get snap caps for my .35 Rem?

Thanks
Tom

CJ · « **Reply #1 on:** December 04, 2004, 10:04:13 AM »

You would probably have to make them if you reload, or try to get someone who reloads to make them for you. Dont remember ever seeing them commercial made. Size a case like normal, seat a bullet, put a dab of silicone caulk in the primer. When I do them for friends I drill a hole through the bottom to identify and prevent mistakes. If you get totally stuck, PM me, Ill do a couple up for you.

TennesseeNuc · « **Reply #2 on:** December 04, 2004, 07:39:34 PM »

TMP,
You can make some. Deprime a spent case, then drill out the primer pocket. Use a 1/4X20 tap and thread the hole. Screw in a nylon license plate screw and cut it off flush with the base. :grin:
Best,
TnNuc

papajohn428 · « **Reply #3 on:** December 26, 2004, 11:23:17 AM »

Heck, I just squeeze a little rubber cement into the primer pocket, and VOILA! Snap cap. :wink:

PJ

ratgunner · « **Reply #4 on:** December 26, 2004, 02:52:52 PM »

Have you tried cabelas? maybe midway brownells...