« previous next »
Pages: [1]   Go Down

Author Topic: Glock 35  (Read 842 times)

0 Members and 1 Guest are viewing this topic.

Offline Steve 48

  • Trade Count: (0)
  • Member
  • *
  • Posts: 35
Glock 35
« on: January 20, 2005, 08:44:57 AM »
Does anyone have a good load for this gun??? I have the factory barrel, a KKM and a Jarvis barrel. I would appreciate any information. My typical loads are in the 2-3 inch range at 25 yds. I need a good load for action pistol power factor. I really like this gun but I would like it to be a bit more accurate.Its easy to shoot and quick.  Steve 48
Logged

Offline redawg

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 167
  • Gender: Male
Glock 35
« Reply #1 on: February 05, 2005, 06:27:46 AM »
Steve, I don't know what the requirements are for action pistol power factor, but I've been running a 135gr Nosler behind 12.0gr of Hodgdon's Longshot.  Book says 1480 from a 4" barrel, should be more from the G35.  BTW, this load was taken from Hodgdon's annual reloading manual.  I've stopped shooting them for now since I haven't picked up an aftermarket barrel for mine yet.  If you were gonna choose between Jarvis and KKM, which would you choose?  I've been leaning towards a Jarvis due to the black finish.  Does one seem to be more accurate than the other to you?
Logged

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Glock 35
« Reply #2 on: February 06, 2005, 04:49:24 AM »
Jarvis, hands down! Don't know what the power factor is for Action Pistol either. Is the formula for finding the factor the same as IPSC?IDPA?
velocityXWeight of projectile (Grains) /1000.
Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,

Offline redawg

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 167
  • Gender: Male
Glock 35
« Reply #3 on: February 06, 2005, 09:19:00 AM »
Thanks Savage!  Where did you get your Jarvis barrel(s)?  I've looked at Lonewolf Dist.  Have you done business with them?  Recommend them?  Thanks!
Logged

Offline Steve 48

  • Trade Count: (0)
  • Member
  • *
  • Posts: 35
Glock 35
« Reply #4 on: February 07, 2005, 10:23:48 AM »
Actually, the KKM barrel seems to be more accurate than the Jarvis barrel. I called Jarvis directly to get my barrel about 4 years ago. I have been using 135 gr Rainer bullets with 4.5 grs of Clays which is very accurate for the mover but a bit too much for the barricades. Sometimes I use Leadheads with a 140 gr bullet with 4.0 grs of clays or 180 gr Leadheads bullet with 5.4grs of WSP for the plates. I usually score 1200 to 1600 depending on my day in action pistol. Steve 48
Logged

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Glock 35
« Reply #5 on: February 08, 2005, 05:32:54 AM »
I have been satisified with the products and services of "Lone Wolf". I have bought federal ordanince barrels from them as well as other items.
Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,

Offline redawg

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 167
  • Gender: Male
Glock 35
« Reply #6 on: February 08, 2005, 01:42:54 PM »
Thanks guys!  I guess once the tax man sends my refund, I'll have a decision to make.  Sorry about getting off topic.  Now back to Steve's question.  Anybody else got a good load for their G35?
Logged
Pages: [1]   Go Up
« previous next »