Author Topic: Win 760 ball  (Read 582 times)

0 Members and 1 Guest are viewing this topic.

Offline olredhead

  • Trade Count: (0)
  • Member
  • *
  • Posts: 94
Win 760 ball
« on: January 24, 2005, 06:20:22 AM »
Hey guys, ol redhead here. Hang out over on NEF centerfire and asked this question over there but this might be a better place. Came across a can of win 760 ball and need some info on it. Loading for a 223 and have found nothing except 06 data. Do any of you have any loads or links that would help or should I swap it off.  Thanks   olredhead   :D

Offline jhalcott

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1869
Win 760 ball
« Reply #1 on: January 24, 2005, 05:59:55 PM »
I'd swap it for a can of 748 as 760 is too slow for the tiny 223 case.

Offline olredhead

  • Trade Count: (0)
  • Member
  • *
  • Posts: 94
Win 760 ball
« Reply #2 on: January 25, 2005, 02:46:01 AM »
Thanks for the info, was afraid that would be the answer. Will see what I can do for a swap somewhere. olredhead

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
Win 760 ball
« Reply #3 on: January 25, 2005, 06:01:09 AM »
W-760 will work in the .223 Remington:

52 & 53 grain bullets:
W-760 From 26.0 grains to 28.0 grains
 Remington 7-1/2 Primer

55 grain bullets:
W-760 From 26.0 grains to 29.4 grains
 Remington 7-1/2 Primer

60 to 63 grain bullets:
W-760 From 26.5 grains to 29.0 grains
 Remington 7-1/2 Primer

68 to 70 grain bullets:
W-760 From 27.0 grains to 28.9 grains
 Remington 7-1/2 Primer

Offline jhalcott

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1869
Win 760 ball
« Reply #4 on: January 25, 2005, 12:24:22 PM »
RIC , those are about the same loads I use with 748!!
   I'll have ti try some of them as Ihave more 760 than 748 on hand.

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
Win 760 ball
« Reply #5 on: January 25, 2005, 12:44:36 PM »
Quote from: jhalcott
RIC , those are about the same loads I use with 748!!
   I'll have ti try some of them as Ihave more 760 than 748 on hand.


40's:
W-748 From 26.0 grains to 30.0 grains
 Remington 7-1/2 Primer

45's:
W-748 From 24.0 grains to 30.0 grains
 Remington 7-1/2 Primer

50's:
W-748 From 24.0 grains to 30.0 grains
 Remington 7-1/2 Primer

52 & 53's:
W-748 From 23.5 grains to 30.0 grains
 Remington 7-1/2 Primer

55's:
W-748 From 22.7 grains to 30.0 grains
 Remington 7-1/2 Primer

60 to 63's:
W-748 From 22.1 grains to 27.5 grains
 Remington 7-1/2 Primer

68 to 70's:
W-748 From 23.4 grains to 27.0 grains
 Remington 7-1/2 Primer

75's:
W-748 From 20.2 grains to 25.5 grains
 Remington 7-1/2 Primer

77's:
W-748 From 22.6 grains to 24.1 grains
 Remington 7-1/2 Primer

80's:
W-748 From 21.3 grains to 25.8 grains
 Remington 7-1/2 Primer

As you can see, W-748 is a better choice of powder, and has a wider loading range than W-760.

However, the statement was made that W-760 is not suitable for the .223 Remington cartridge.  I would not use W-760 for bullets lighter than 52 grains, nor heavier than 70 grains.

Offline earschplitinloudenboomer

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 145
Win 760 ball
« Reply #6 on: January 25, 2005, 08:27:20 PM »
Would check a good loading manual for velocities. Have seen data for .223 using WW-760 but velocities were way down. Very versatile powder, use it in several calibers, .243, 7X57, 8X57 and 30-06.