Author Topic: Which 280 Rem. ammo to use ???  (Read 763 times)

0 Members and 1 Guest are viewing this topic.

Offline NYH1

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1695
  • Gender: Male
Which 280 Rem. ammo to use ???
« on: January 24, 2005, 03:14:04 PM »
My father and I are thinking about going on a black bear hunting in the near future, probably in Quebec, Canada. I have a few rifles to choose from. One is a 444 Marlin. We'll definitely be bring that one. I also want to bring my 280 Rem. right now this rifles set up for deer hunting. I use factory ammo. For deer I use Remington 140 gr. Pointed Soft Point Core-Lokt (going to try Hornady's 139 gr. SST Light Mag.). I want to use something a little heavier for bear. I guess the bear range from 200 to 600 pounds in the area were going to go. I understand that the chances of seeing a 400 to 600 pound black bear are slim to none. I would rather be prepared!

I was looking at Remington's 165 gr. Soft Point Core-Lokt ammo. Also Federal's 150 gr. Nosler Partition and 160 gr. Trophy Bonded Bear Claw ammo. Winchester's 140 gr. Failsafe seems a little light and I'd rather use something heavier that will penetrate deeper. What do you guys/gals think ? :?:
"ROLL TIDE". . .Back To Back. . .Three In The Last Four Years "GO GIANTS"  "YANKEES"

Offline The deerslayer

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 203
Which 280 Rem. ammo to use ???
« Reply #1 on: January 25, 2005, 10:36:13 AM »
For max penetration I would use the 160 Trophy Bonded Bear Claw ammo, but I don't think max penetration is needed.

Offline BIG JAKE

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 232
Which 280 Rem. ammo to use ???
« Reply #2 on: January 28, 2005, 10:39:41 AM »
NY Hunter use the 165 core lokts. They would be my pick.  The federals 150 nosler part. or the trophy bonded are a little over kill. The remington's would be better up close with the soft point. Just my thoughts. :D  :D
squeeze it, don't pull it!!!!

Offline Lawdog

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4464
Which 280 Rem. ammo to use ???
« Reply #3 on: January 28, 2005, 01:06:02 PM »
Just about the time you figure that you will not see a bear in the 400 - 600 lb. weight class one walks into your lap.  Any time you hunt something that can/will bite back you should have the best bullet in your rifle that you can get.  Go with a top premium bullet that your rifle shoots well.  Leave the Core-Lokts for non-dangerous game.  Lawdog
 :D
Gary aka Lawdog is now deceased. He passed away on Jan. 12, 2006. RIP Lawdog. We miss you.

Offline BIG JAKE

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 232
Which 280 Rem. ammo to use ???
« Reply #4 on: January 31, 2005, 01:24:09 PM »
Before premium bullets became available in factory loads core lokts seemed to work pretty well.
squeeze it, don't pull it!!!!

Offline pastorp

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4697
  • Gender: Male
Which 280 Rem. ammo to use ???
« Reply #5 on: February 08, 2005, 08:26:22 AM »
Before what we call premium bullets existed Remington core-locks were premium. In my opinion they still are. Regards, Byron
Byron

Christian by choice, American by the grace of God.

NRA LIFE

Offline while99

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 286
Which 280 Rem. ammo to use ???
« Reply #6 on: February 18, 2005, 07:11:46 PM »
Federal now loads a 160 Nosler Accu-bond in the .280 Remington.  I have not tried it but this should be an excellent big game load for the .280 for anything short of the large bruins.