Author Topic: Need .357 Mag recipe for W296 (Read 412 times)

Bounty Hunter · « **on:** January 30, 2005, 08:00:51 AM »

Please help me complete the following .357 mag load...........

Starline brass

Winchester small pistol magnum primer

158 gr Hornady XTP JHP bullet

How many grains of Win 296 powder???

any help you provide will be greatly appreciated!

BH

Haywire Haywood · « **Reply #1 on:** January 30, 2005, 08:16:43 AM »

Beat ya to it Steve :-D

http://stevespages.com/357p_4_158.html

Ian

Bounty Hunter · « **Reply #2 on:** January 30, 2005, 09:27:05 AM »

Thanks alot, HH for the response!! That was quick and tells me more than I ever wanted to know about the 357 mag caliber!! Hope I can return the favor someday. I'm gone to the bench.
BH

ricciardelli · « **Reply #3 on:** January 30, 2005, 01:07:12 PM »

Quote from: Haywire Haywood

Beat ya to it Steve :-D

http://stevespages.com/357p_4_158.html

Ian

Grrrrrrrrrrrrr......... :twisted:

Only because we lost electricity up here all day!!!

Mark whiz · « **Reply #4 on:** February 01, 2005, 06:26:33 PM »

For what it's worth, out of my 4" Ruger Security Six, 16.0gr of 296 with 158gr XTPs & Win WSPM primers cuts nice tight groups for me. And it's quite powerful too. :grin:

Awf Hand · « **Reply #5 on:** February 02, 2005, 11:23:31 AM »

I disassembled five factory loads from Winchester. They all were loaded with the 158gr JSP. All of them had 16.0gr of a spherical powder. Since I'm pretty sure they would use their own powder, I guess that would be W296.