Author Topic: Anyone ever used Blue Magic Metal Polish on handis?  (Read 611 times)

0 Members and 1 Guest are viewing this topic.

Offline Hazard

  • Trade Count: (0)
  • Member
  • *
  • Posts: 84
Anyone ever used Blue Magic Metal Polish on handis?
« on: February 28, 2005, 04:01:29 PM »
well i searched around the neighboring towns and couldnt find the FLitz metal polish, but i found some of this Blue Magic, that my buddy had and was just wondering if anyone has used it and if it will be safe to use, i dont understand what the metal polish does to the bore, ive never used it before on guns, but you guys seem to swear by it. whats the best way to apply this and how to i get it all rubbed out of the bore, just curious and want to do it right so i dont mess anything up :grin:  thanks for any replys. here is a link to a site that sells the stuff.http://www.midwayautosupply.com/detailedproductdescription.asp?10130

thanks
Hazard :D

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Anyone ever used Blue Magic Metal Polish on
« Reply #1 on: February 28, 2005, 05:00:58 PM »
Hazard, all the metal polish does is smooth the bore, just like a lot of shooting does, but without the copper build up and essentially, the polish will reduce copper build up.
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Hazard

  • Trade Count: (0)
  • Member
  • *
  • Posts: 84
Anyone ever used Blue Magic Metal Polish on
« Reply #2 on: March 01, 2005, 02:43:39 AM »
thanks quick, i think ill give this stuff a whirl, from what i understand i should coat a patch and run it through the bore back and forth 50 times without stopping, then run dry patches through until they come out clean?  And also be sure the bore is ABSOLUTELY clean before applying the polish.  If i am nnot correct on this procedure will someone clarify me.

thanks
hazard

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Anyone ever used Blue Magic Metal Polish on
« Reply #3 on: March 01, 2005, 05:28:20 AM »
Sounds good, but you need to change patches every few passes. :wink:
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Hazard

  • Trade Count: (0)
  • Member
  • *
  • Posts: 84
Anyone ever used Blue Magic Metal Polish on
« Reply #4 on: March 01, 2005, 12:36:11 PM »
ok quick just got done, i cleaned thoughouly until dry patches came out, did the 50 pass thing with my polish, used dry patches to dry that out, now my barrel is SPARKLY :grin: i get blinded when i hold it to light ( no joke) now, do i put a coat of rem oil on a patch run it down the bore, then chase it with a dry patch, or do i clean the gun agian with solvent and crap, not sure when ill get to shoot her again, the weather is well, no so pleasant here in eastern iowa and i may not shoot it for a week or so. thanks quick! :D

Hazard

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Anyone ever used Blue Magic Metal Polish on
« Reply #5 on: March 01, 2005, 12:39:34 PM »
Yes, it wouldn't hurt to use your normal cleaning routine after you get done polishing, then oil it like normal, you're doing great!! :wink:
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Hazard

  • Trade Count: (0)
  • Member
  • *
  • Posts: 84
Anyone ever used Blue Magic Metal Polish on
« Reply #6 on: March 01, 2005, 12:59:50 PM »
thank ya sir, ill get downstairs and get that done, thanks for the quick/prompt response :eek:


Thanks ALOT! :D
Hazard