« previous next »
Pages: [1]   Go Down

Author Topic: 6.5 X 55 correct rim diameter???  (Read 484 times)

0 Members and 1 Guest are viewing this topic.

Offline 270Handiman

  • GBO Supporter
  • Trade Count: (3)
  • Avid Poster
  • *****
  • Posts: 189
  • Gender: Male
6.5 X 55 correct rim diameter???
« on: March 18, 2005, 04:31:49 AM »
Can anyone tell me the correct rim diameter for a swedish mauser m38.  I have heard that there is a variation between the military brass and our new domestic brass.  Can anyone shed any light on this subject?

Thanks,

270
Logged

Offline jh45gun

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4992
6.5 X 55 correct rim diameter???
« Reply #1 on: March 18, 2005, 08:16:09 AM »
The Hornady book list it as .476. I would guess there would be variations in brass as to who may make it. As long as it is close to standard a bit off one way or the other should not make any significant difference as I am sure there are tolerances built in for this situation. Jim
Logged
Said I never had much use for one, never said I didn't know how to use it.

Offline S.S.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2840
6.5 X 55 correct rim diameter???
« Reply #2 on: March 18, 2005, 08:21:53 AM »
There were slight differences from country to country,
several scandinavian countries used this round.
They have in the last 5 or 6 years standardized the
round as the 6.5 SKAN.
You will encounter several diameters.
Logged
Vir prudens non contra ventum mingit
"A wise man does not pee against the wind".

Offline Mikey

  • GBO Supporter
  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
6.5 X 55 correct rim diameter???
« Reply #3 on: March 19, 2005, 02:13:33 AM »
270handiman:  my Speer manula lists the rim diameter of the 6.5 Swede at .480.  HTH.  Mikey.
Logged

Offline 270Handiman

  • GBO Supporter
  • Trade Count: (3)
  • Avid Poster
  • *****
  • Posts: 189
  • Gender: Male
6.5 X 55 correct rim diameter???
« Reply #4 on: March 21, 2005, 03:43:40 AM »
Thanks guys!
Logged

Offline muskeg13

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 208
6.5 X 55 correct rim diameter???
« Reply #5 on: March 22, 2005, 09:54:40 PM »
Samples taken from my fired brass:
Federal .474
R-P .472-3
PMC .475-7
Norma .477
Lapua .478
Raufoss (Norwegian military 02-98) .478-9

I've gotten the best groups with the Lapua brass, but it's more expensive.
Logged

Offline cvixx

  • Trade Count: (0)
  • Member
  • *
  • Posts: 61
6.5 X 55 correct rim diameter???
« Reply #6 on: March 23, 2005, 04:16:25 AM »
A while back the American companies when American companies started making 6.5x55, for some reason they used the same base diameter as .308 oe 30-06, which is too small.  The fired cases developed a noticeable bulge at the base.  Supposedly they have corrected this problem.  

FWIW, 7.5 Frog is the same base diameter as Swedish round and 7.5 Swiss is larger still (why you can use .284 brass to make it).
Logged

Offline R.W.Dale

  • Trade Count: (22)
  • Senior Member
  • *****
  • Posts: 2170
6.5 X 55 correct rim diameter???
« Reply #7 on: March 26, 2005, 02:35:21 AM »
Quote from: cvixx
A while back the American companies when American companies started making 6.5x55, for some reason they used the same base diameter as .308 oe 30-06, which is too small.  The fired cases developed a noticeable bulge at the base.  Supposedly they have corrected this problem.  

 Oh really I may need to replace my brass for my AG42B then. Where can I check up on this?
Logged
Pages: [1]   Go Up
« previous next »