Author Topic: Scope question: (Read 661 times)

tedfl · « **on:** March 18, 2005, 09:31:28 AM »

Is there anybody who sells scopes with a ½ or 5/8 dot installed that does not void the factory other than the Leopolds sold by Premier Reticular? I was thinking B & L, Weaver etc. I know I can have a dot installed in a scope by Lee, but I think the warranty would be voided. I also wanted to just buy the scope with the dot installed ready to go.
Thanks
Tedfl

drover · « **Reply #1 on:** March 18, 2005, 12:43:48 PM »

B&L, now Bushnell Elite, 4200 series 6 - 24's are available with a 1/2 minute dot in them.

eeleater · « **Reply #2 on:** March 18, 2005, 12:44:00 PM »

If you search this site or scrool back to past posts you will find discussion of factory Weaver T-24's with 1/2 min dot. My understanding is that the first ones had 1/8 min clicks, but later ones had 1/4 min clicks.

http://www.graybeardoutdoors.com/phpbb2/viewtopic.php?t=42467&highlight=weaver+1+2+min+dot

If you go the the Bushnell web page they show the 4200 Elite with a 1/4 min dot. Not what you wanted -but better that the usual 1/8 min or mil dot.

www.bushnell.com/products/riflescopes/specs/42-6243a.html

drover · « **Reply #3 on:** March 19, 2005, 03:38:48 AM »

OOPS!!! - Guess I should have checked the current catalog. I know that they were available because I have two of them. However, on checking the new catalog I see that the 1/2 min. dot is still avaible under their custom reticle program, the model # is 42624M, the charge for the 1/2 min dot is $55.00. Bushnell Riflescopes, Attn: custom reticles, 8500 Marshall dr., Lenaxa, KS 66214

tedfl · « **Reply #4 on:** March 21, 2005, 04:00:31 AM »

Thank guys, that is what I was looking for,
Tedfl