Author Topic: Pellet gun Oil What do you guys use/? (Read 2042 times)

jh45gun · « **on:** April 12, 2005, 04:06:43 AM »

I have called all over town and it seems like no one has oil in stock for pellet guns. I know you need special oil as petrolium based oil eats the seals so what do you guys use as a substitute if it is not regular pellet gun oil or is that all you use? Jim

jeager106 · « **Reply #1 on:** April 12, 2005, 04:12:07 AM »

I use NO SUBSTITUTES. I order RWS lube, there are different kinds for different applications. Keep any of it out of the barrel.
For the small amount of $$$ why not order on line and wait a few days to get the right stuff.
For the outside to protect the finish any good grade of gun oil.

jh45gun · « **Reply #2 on:** April 12, 2005, 08:29:47 AM »

Found out the the RWS chamber oil is silicon based so I would guess any good refined Silicon based oil would work.

Lawdog · « **Reply #3 on:** April 12, 2005, 04:56:17 PM »

I use Beeman MP-5 Metalophilic Oil and Silicone Gun Cloth for most of my maintenance needs. Remember to use oil sparingly. Easy to use too much. Lawdog

jh45gun · « **Reply #4 on:** April 12, 2005, 07:25:13 PM »

Thanks will keep checking for some oil some one must have it locally. Jim

Lawdog · « **Reply #5 on:** April 13, 2005, 08:38:21 AM »

Quote from: jh45gun

Thanks will keep checking for some oil some one must have it locally. Jim

Why not go to a place like AirGun Express on the net for your maintenance products? Go to http://www.airgunexpress.com/beemanmaintenancesupplies.htm and check out the products from Beeman they have to offer. I buy my maintenance products from them and they ship quickly. Lawdog

jh45gun · « **Reply #6 on:** April 13, 2005, 06:14:35 PM »

Lawdog, Thanks for the link will check it out. Jim

Airsporter · « **Reply #7 on:** April 17, 2005, 11:30:08 AM »

There is no single pellet gun oil. It depends on what type of pellet gun you're talking about, and in most cases you need multiple lubricants for the same gun.

Spring piston gun tuners use as many as 5 or 6 different lubes on an individual gun. Don't use any petroleum based lubes in the compression chamber.

For rust protected on exterior steel, I like Rem oil.

Triggers can take almost any gun lubricant or 'action' grease.

For pump-up pneumatics, I suggest Mac-1's "secret sauce." I has been suggested this may be motorcycle fork oil. Some say auto tranny fluid works good too.

On pre-charged guns use only silicone diver's grease on the seals.