Author Topic: 204 ruger load data  (Read 1070 times)

0 Members and 1 Guest are viewing this topic.

Offline contender hunter

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 174
204 ruger load data
« on: April 19, 2005, 04:19:34 PM »
could someone pass along some load data for the 204 using H-4895 powder , I found data on this powder at the hodgdon site I just want to verify that its right
pa hunter

Offline MickinColo

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 163
204 ruger load data
« Reply #1 on: April 20, 2005, 12:42:21 PM »
204 Ruger

Sierra lists H 4895 for their 32gr Blitzking as 3500/25.8, 3600/26.3, 3700/26.8, 3800/27.2, and 3900/27.7 Max. the 39gr Blitzking is 3200/24.1, 3300/24.7, 3400/25.3, 3500/25.9, and 3600/26.5 Max.
Keep your powder dry and your flint sharp

Offline MickinColo

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 163
204 ruger load data
« Reply #2 on: April 20, 2005, 03:09:06 PM »
Keep your powder dry and your flint sharp

Offline contender hunter

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 174
204 RUGER LOAD DATA
« Reply #3 on: April 22, 2005, 01:20:31 PM »
Thanks for the links -- ------Did you guys notice the variation in data. for H-4895 , 32 gr. bullet      

     Hodgdon--  27.0---29.0    ===         3669---3980 fps  24'' bbl.  

     Sierra   ---  26.3---27.7   ===        3600---3900 fps    26 bbl            

      Hornady---     25.3--- 28.4   ===    3600---4100  fps    26'' bbl          
   
    So min start is from 25.3 to 27.0 and max could be 27.7 to 29 seems like quite a spread.                                                                         PLEASE DOUBLE CHECK THESE FIGUIRES BEFORE USING
pa hunter

Offline MickinColo

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 163
204 ruger load data
« Reply #4 on: April 23, 2005, 06:17:21 AM »
Different bullet profiles can cause different pressure concerns. 1-grain difference in maximum loads and a 200-fps spread is interesting. It’s hard to say who’s jiving who in that data.
Keep your powder dry and your flint sharp

Offline Catfish

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2696
204 ruger load data
« Reply #5 on: April 23, 2005, 10:04:50 AM »
With the same powder lot, primers and bullets the data will very quite a bit do to temp. and air presure. I losd several different wildcatsand when looking for the fastest loads i will always work them up in very hot weather when presures are greatest. Hot loads worked up in cold weather are boombs in hot weather.