Author Topic: Reloading 9K, 9x18 and 9x19  (Read 376 times)

0 Members and 1 Guest are viewing this topic.

Offline PA-Joe

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 980
Reloading 9K, 9x18 and 9x19
« on: April 23, 2005, 02:33:57 PM »
Can you use the same 9m19 dies to reload the 9K and 9x18 like you can do with the 38/357?

Offline Leftoverdj

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1398
Reloading 9K, 9x18 and 9x19
« Reply #1 on: April 23, 2005, 03:26:21 PM »
9mm Kurtz, yes.

I've never had a 9x18, but it looks to me like there is too much difference in bullet diameter.
It is the duty of the good citizen to love his country and hate his gubmint.

Offline BCB

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 928
Reloading 9K, 9x18 and 9x19
« Reply #2 on: April 23, 2005, 11:59:44 PM »
PA-Joe,

9x19=0.356"
9x18=0.365"

I assume you are meaning the 9x18 Makarov?

I don't think the 9mm para dies will work with it...BCB

Offline Castaway

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1105
  • Gender: Male
Reloading 9K, 9x18 and 9x19
« Reply #3 on: April 24, 2005, 12:48:06 AM »
Although the 9x19 and 9 Kurz (380 ACP) both use the same diameter bullet, the 9x19 is a tapered cartridge and thus, the 9 Kurz will not go far enough into the die to size the case.  The 9x18 Mak definately can not use either the 9x19 or 380 die as the bullet diamter is so much greater.   Not sure about the 9 Ultras (9x18 and 9x18.5) but they are cylindrical and should work in a 380 die.

Offline Reed1911

  • GBO Sponsor
  • Trade Count: (18)
  • Senior Member
  • *****
  • Posts: 1332
    • www.reedsammo.com
Reloading 9K, 9x18 and 9x19
« Reply #4 on: April 24, 2005, 02:41:01 AM »
The 9x18 Ultra can be made using the .380/9x17/9mm Kurtz
The 9x18 Makarov cannot.
Ron Reed
Reed's Ammunition & Research
info@reedsammo.com
www.reedsammo.com

Offline PA-Joe

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 980
Reloading 9K, 9x18 and 9x19
« Reply #5 on: April 25, 2005, 02:54:46 AM »
I didn't realize that the 9x18 makarov was 0.365. Thank you!