Author Topic: Accuracy of 17 HMR  (Read 1151 times)

0 Members and 1 Guest are viewing this topic.

Offline tryit

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
Accuracy of 17 HMR
« on: April 25, 2005, 03:39:22 AM »
Gents and Ladies, I have the 17 HMR and have shot it quite a bit but I could not seem to wring out the accuracy I wanted. I got a good look at the stock, action, and barrel relation. I bed the stock to the barrel and action. The accuracy will now get down into the sub MOA's. Has anyone had the same results. This is my travel, and do all rifle. I shoot a few crows now an again but do not hunt. This 17 HMR is really a slick little rifle. I am now starting work on my Ladies rifle. I caught hell for getting my rifle to shooting before hers. A mans work is never done. Tryit.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Accuracy of 17 HMR
« Reply #1 on: April 25, 2005, 04:54:41 AM »
I have 2 917s, a 917V and a 917VS, both will consistently shoot .6"-.7" 100yd groups, great rifles once the triggers are "fixed" with RB drop in triggers....If you would like more info on the 17hmr or Marlins specifically, check out the forums at RFC...

www.rimfirecentral.com

"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Wynn

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 283
Accuracy of 17 HMR
« Reply #2 on: April 25, 2005, 11:28:20 AM »
My 917vs shoots .7-.8 inch groups at 100 using the Hornady 17 and 20 grain stuff but opens up to about 1.2 with CCI 20 grain. This is a right out of the box rifle with no mods or improvements. In the past, I have had good results bedding the actions and free floating the barrels on my .22s. I probably won't bed the 917 given its current accuracy but will definitely do a trigger fix or change.
American by birth; Southern by the Grace of God

Offline DannoBoone

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 321
  • Gender: Male
Accuracy of 17 HMR
« Reply #3 on: May 26, 2005, 04:30:13 PM »
My 917VS that I bought only slightly used (less than 50 rounds), shot 1/4
and 3/8" group @ 75yds. Haven't shot paper since. She's gotten two crows
right at 165yds, one with the CCI and one with the Hornady 17gr. It's also
popped off the heads of several dozen squirrels at close to 100yds (all with
Hornady's), and over a hundred starlings with CCI's, Remington's, and
Hornady's. This has all been done with the only modification being the
sear surfaces honed and the spring being replaced with the pen spring on
the original trigger.

This rifle is an absolute "keeper"!
We need to change our politicians
like we do dirty diapers.............
for the same reason.

Offline coyote 2

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 152
    • http://spaces.msn.com/members/schwager/
Accuracy of 17 HMR
« Reply #4 on: June 20, 2005, 12:52:32 PM »
Well - I shot this group Saturday in a 5 to 10 MPH wind.
5 Shots at 100 yards. Course my weapon is the "old" Marlin
17VS..


 :D
Don't cry because its over - Smile because it happened!

Offline victorcharlie

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3573
Accuracy of 17 HMR
« Reply #5 on: June 23, 2005, 03:35:07 PM »
Very nice group.......don't know what it measures, but I can tell it's a good one with all holes touching........great shooting!
"Extremism in the defense of liberty is no vice. Tolerance in the face of tyranny is no virtue."
Barry Goldwater