« previous next »
Pages: [1]   Go Down

Author Topic: Box Calls, Your Opinions Needed  (Read 1130 times)

0 Members and 1 Guest are viewing this topic.

Offline Lawdog

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4464
Box Calls, Your Opinions Needed
« on: April 25, 2005, 03:06:08 PM »
I am going to try my hand at making my own box calls.  Got some excellent furniture grade lumber, cedar, walnut, oak, and maple. to work with.  I have 2 different instructions designs to work from - single & double sided, and I would like to know the Pros & Cons of both?  What are their good points and bad?  Which do you prefer and why?  Lawdog
 :D
Logged
Gary aka Lawdog is now deceased. He passed away on Jan. 12, 2006. RIP Lawdog. We miss you.

Offline Duffy

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 660
Box Calls, Your Opinions Needed
« Reply #1 on: April 25, 2005, 08:21:04 PM »
I like the double. If one side messes up you have a backup.
Logged

Offline Tcallbuilder

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 164
Box Calls, Your Opinions Needed
« Reply #2 on: April 27, 2005, 01:02:32 AM »
I prefer a two sided (V) shaped box,
each side will give a slightly different tone, even if the sides are made alike....each side will have its own pitch... they can also be used as a locator call by imititing a gobble.

A one sided call would probably be easier to build and tune.

The biggest draw back to any wooden box call is they draw moisture.
even on the clear sunny days there is always a dew...which soaks into the wood.
I have had the best luck with oak...it just seems to draw less moisture.
but cedar,walnut, even poplar woods are good you just need to use a good water seal.  

Let us know how it turns out!
TCB
Logged

Offline Sgtshultzy1

  • Trade Count: (1)
  • Member
  • *
  • Posts: 74
Box Calls, Your Opinions Needed
« Reply #3 on: April 27, 2005, 08:56:36 AM »
Hey Lawdog..could you please tell me where you got the instructions for making box calls?  I have been wanting to give this a try myself and after several failed attempts figure I may want to get a real design.

Thanks..Shultzy
Logged

Offline Lawdog

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4464
Box Calls, Your Opinions Needed
« Reply #4 on: April 27, 2005, 10:12:15 AM »
Quote from: Sgtshultzy1
Hey Lawdog..could you please tell me where you got the instructions for making box calls?  I have been wanting to give this a try myself and after several failed attempts figure I may want to get a real design.

Thanks..Shultzy


Go to http://www.customcalls.com/makeaturkeyboxcall.htm for a set of instructions on making box calls.  There may be other web sites but I haven't looked.  Maybe others here might know and post them.  Lawdog
 :D
Logged
Gary aka Lawdog is now deceased. He passed away on Jan. 12, 2006. RIP Lawdog. We miss you.

Offline Sgtshultzy1

  • Trade Count: (1)
  • Member
  • *
  • Posts: 74
Box Calls, Your Opinions Needed
« Reply #5 on: April 27, 2005, 12:15:33 PM »
Thank you sir!
Logged

Offline frankb_ks

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
Box Calls, Your Opinions Needed
« Reply #6 on: April 30, 2005, 02:55:57 PM »
have to agree with al62.  killing a bird over a call that you handcrafted definitely adds an element to the sport.  I have not made box calls, but do make slates and wingbones that seem to work pretty well, for me and others as well.

good hunting to you ,

frank
Logged

Offline oso45-70

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1918
  • Gender: Male
Turkey Hunting
« Reply #7 on: June 12, 2005, 11:16:42 AM »
Lawdog

I have some of the calls Frank made and they wotk pretty good, Took some getting used to. The turkey call made out of a turkey wing bone works great, A friend of mine lives out in the country and has turkeys around his place all the time and i tried the wing bone out on them and got all kinds of results..............Joe...........
Logged
LIFE NRA BENEFACTOR
LEAA LIFE MEMBER
GOA MEMBER
CCKBA MEMBER
AF & AM
NAHC LIFE
NMSSA MEMBER
ATA MEMBER

Profanity is the crutch of a crippled brain

Offline justannie2

  • Trade Count: (0)
  • Member
  • *
  • Posts: 67
    • BKC Calls
Box Calls, Your Opinions Needed
« Reply #8 on: August 05, 2005, 09:57:19 AM »
I made a turkey bone wing call this year. Kind of neat using the bones for a call...



Also learning how to make pot calls. This is my first, not very successful, attempt....  :lol:

Logged

Offline oso45-70

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1918
  • Gender: Male
Turkey Hunting
« Reply #9 on: August 11, 2005, 09:47:33 AM »
Justannie2

Looks like you knocked it out of the park with your wing bone, Its great looking, I've got one made by frank and it workes great, The picture of your pot call is kinda dark and these old eyes of mine don't do so well on dark pictures. If you could take another picture of it i would appreciate it very much. Your wing bone just looks great, Regards.....Joe.......
Logged
LIFE NRA BENEFACTOR
LEAA LIFE MEMBER
GOA MEMBER
CCKBA MEMBER
AF & AM
NAHC LIFE
NMSSA MEMBER
ATA MEMBER

Profanity is the crutch of a crippled brain

Offline justannie2

  • Trade Count: (0)
  • Member
  • *
  • Posts: 67
    • BKC Calls
Box Calls, Your Opinions Needed
« Reply #10 on: August 11, 2005, 11:16:29 AM »
Here are a couple of lighter pictures (I hope) of the pot. My picture taking leaves a LOT to be desired.... :?

 
Logged

Offline gone-hunting

  • Trade Count: (5)
  • Member
  • *
  • Posts: 53
Box Calls, Your Opinions Needed
« Reply #11 on: August 16, 2005, 05:18:39 PM »
I gave up on the different calls and such. Just use my natural throat. Works great in rain or shine and I don't have to carry anything but my shot gun.
Logged

Offline varmit_master

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 764
Box Calls, Your Opinions Needed
« Reply #12 on: September 10, 2005, 09:32:17 PM »
Hi Justannie2 that is a very nice lookin wingbone call. I like the way it is made. And the pot' look like there made good how do they sound both of them. VM :D
Logged

Offline justannie2

  • Trade Count: (0)
  • Member
  • *
  • Posts: 67
    • BKC Calls
Box Calls, Your Opinions Needed
« Reply #13 on: September 10, 2005, 10:38:12 PM »
Well.... actually that pot sounds horrible  :)  It was the first one I made and I didn't know anything. This second one turned out sounding good enough that a custom call maker said he wanted it....





As for the wing bone, that was my first attempt at one. I'm not sure if the sound is right (unfortunately I'm tone deaf  :? )  But it's easily remedied if the sound isn't quite right on it once I get someone who knows the sound to test it out.
Logged

Offline varmit_master

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 764
Box Calls, Your Opinions Needed
« Reply #14 on: September 12, 2005, 03:32:29 AM »
Hi the wing bone look like art a very pretty nice lookin call . I would like to have it to hang with my turkey beards. VM PS Looks like it was made by a PRO! :grin:
Logged

Offline justannie2

  • Trade Count: (0)
  • Member
  • *
  • Posts: 67
    • BKC Calls
Box Calls, Your Opinions Needed
« Reply #15 on: September 23, 2005, 05:28:48 PM »
Thanks for the compliment VM   :-)  I've got the wing bone call hanging with the fan I mounted. They look pretty good together   :wink:
Logged

Offline varmit_master

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 764
Box Calls, Your Opinions Needed
« Reply #16 on: September 24, 2005, 07:30:17 PM »
Hi justannie2 if you get an extra one that looks that good i will take it. lol :-D  They are a great looking call . Plus they would look good hanging with all my beards VM :D
Logged
Pages: [1]   Go Up
« previous next »