Author Topic: Delivery came yesterday (Read 389 times)

Pecos Clyde · « **on:** February 19, 2003, 03:39:51 AM »

Heyya

Rec'd my dillon 650 yesterday. Three boxes with alot of stuff! I have it all put together, but not dialed in to start reloadin. Other than the setup info in the manual is there anything I need to be extra careful about or need to know while setting up so I don't screw something up? I don't wanto to be callin dillon and orderin a part or three cause I broke somethin settin it up bcuz I was being dumb.

Gotta admit, with all the parts and such I am a bit intimidated. Does anyone use that Redding bullet seating die with the micrometer adjustment? I was wonderin if that is a good thing to have?

DB Leath · « **Reply #1 on:** February 19, 2003, 06:24:50 AM »

Hey Pecos,
Just keep you fingers out of the way when you pull that handle. Just teasin. Just read the directions and take it slow. You will be crankin out the 45 Colt before you know it.
DB

Cheyenne Ranger · « **Reply #2 on:** February 19, 2003, 01:08:47 PM »

Probably your biggest problem will be finding empty brass to reload. :grin:
Dillon's are the way to go for my $$

Let us know how it goes with yours
CR

geronimo jim · « **Reply #3 on:** February 19, 2003, 03:26:55 PM »

By all means.......order the instructin tape from Dillon........it is the number on thing to do when you get a Dillon progressive!!!!! It will save you all kind of time and headaches!!!!