Author Topic: powder recommendations (Read 557 times)

mikedb · « **on:** June 27, 2005, 04:04:08 PM »

I have most everything together to start reloading handgun rounds. I have been researching powders and would like some recommendations. I plan to reload 38 sp, 148 wadcutters and 158 semi wadcutters. Also, light plinking loads for my 44 mag, probably 240 semi wads. I would like to find one powder to do all, at least to start, if possible. Any help? I eventually will reload for my 357.

Lone Star · « **Reply #1 on:** June 27, 2005, 05:20:14 PM »

Unique would fit the range of uses very nicely, but there are cleaner and easier-to-measure powders. W231 and AA #2 have worked for me in similar loads, and Hodgdon Clays and Universal look attractive. There are lots of others, but you'll want a relatively fast burning propellant.

Nobade · « **Reply #2 on:** June 28, 2005, 02:06:47 AM »

Lately I've been using a lot of Titegroup in stuff like that. As the other poster said, there are numerous powders that will work fine.

Questor · « **Reply #3 on:** June 28, 2005, 03:54:39 AM »

Winchester 231 will work great for this application.

jerkface11 · « **Reply #4 on:** June 28, 2005, 04:40:20 AM »

I'd go with unique there's more data for it than just about anything.

Mark whiz · « **Reply #5 on:** June 28, 2005, 11:09:10 AM »

I don't load for the .44, but for .38Spcl & .357Mag, I've found good results with 231, AA#5, Hodgdon Universal. Also Red Dot works well in .38 snubbies and Win 296 is a great choice for .357 & .44 Loads.

Varminter · « **Reply #6 on:** June 28, 2005, 11:59:19 AM »

I use titegroup in 38/357 plinking loads. Unique would be a good one though.

AZ223 · « **Reply #7 on:** June 29, 2005, 12:15:39 AM »

I've only loaded for the .357, but Unique works well for "generic" JSP loads, but not for cast bullets in either of my revolvers. I use 2400 for cast with very good results, and have some H110 I'm anxious to try with 185gr Beartooth GC bullets. Not exactly "plinker" loads, but should be fun anyway! For whatever reason, neither my 686 nor SP-101 like really slow loads.