Author Topic: mt30-30 ? for you  (Read 488 times)

0 Members and 1 Guest are viewing this topic.

Offline yottey

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 128
mt30-30 ? for you
« on: June 28, 2005, 04:01:36 PM »
mt 30-30 I bought the 243 barrel from you and was wondering what factory ammo was best in it and or reloads?I just mounted it on my frame and it fit better than the factory barrel that came on it figured by asking might save me from buying bunch of extra boxes of shells! Thanks in advance!yottey

Offline mt3030

  • Trade Count: (5)
  • A Real Regular
  • ****
  • Posts: 939
  • Gender: Male
mt30-30 ? for you
« Reply #1 on: June 28, 2005, 06:31:19 PM »
I bought that rifle just to get the action and stocks, which I set back to get a 357 barrel. By the time I got it, I had already given up on that caliber, so never even put a round through it. The first two Handi 243 barrel's I owned and shot. They both were Ultras. The only weight bullet I was trying was factory 100 grains, because I was trying for a deer load. I tried both Winchester and Federal, and those two seemed to perfer the Winchesters. Only problem, with both, was two would look good, and the third would be way out, up to 4 inches. Wasn't always the third round. And never went the same direction. I switched scopes, stocks, actions and bedding set-ups. Finally gave up on them. And at least 3 out of 20 would stick in the chamber. Yes, I tryed all the fussing tricks the forun routinely mentions. Then I found a Ultra 7x57, and lost all interest in another 243.  A large numger of forum members have good luck with 243s, and I'm happy for them. I just lost interest. My Remington 243 continues to shoot very well.

Wally
Great Falls, Montana
_________________
NRA Life Member
Rocky Mountain Elk Foundation
Ducks Unlimited

Deceased 6/2/2007

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
mt30-30 ? for you
« Reply #2 on: June 28, 2005, 06:39:51 PM »
Yottey, the Federal 100gr Hi shoks shoot real good outa my Ultra, less than moa, they call em Power shoks now. Gonna try some of the Fusion ammo as soon as it gets here, I'm hopin it will shoot as good as the '06 ammo does in Mac's Ultracomp.

Have fun and good shootin to ya..

Tim :wink:
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline yottey

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 128
mt30-30 ? for you
« Reply #3 on: June 29, 2005, 04:22:16 AM »
Thanks for the help Wally! I bought the barrel to use as a close range woods deer rifle for a 12 year old. Until I can trade or find something on the line of a 30-30 or 357 or 44 to be recambered to 357max or 445mag!I was more worried about where the first couple rounds go out of a cold barrel. Thanks yottey

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
mt30-30 ? for you
« Reply #4 on: June 29, 2005, 06:00:18 AM »
Yottey:

Do you plan on reloading for it? If so...give the Nosler/Winchester Combined Technology's 95 grain Ballistic Silver tip a try...I've had real good luck in the accuracy department with it...Remington nickle cases Rem 9-1/2 primers and Reloader #22 produced some very nice groups for me...I'm loading .004" off the lands with it...it should work great for whitetails...and is a pretty mild shooting load...I worked my barrel over pretty good hand lapping  with Flitz and then making sure it was completely clean before shooting it with a couple differnt cleaners...

http://www.graybeardoutdoors.com/phpbb2/viewtopic.php?t=62494&highlight=3006+ultra+comp

Mac
You can cry me a river... but...build me a bridge and then get over it...

Offline yottey

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 128
mt30-30 ? for you
« Reply #5 on: June 29, 2005, 07:06:11 AM »
I hadn't planed on loading for it but will if I need to.As for flitz I have enough big tubs of it to do the job if I can remember where I put them!I load for dozen + calibers allready but hadn't planed on 243!I would like to find factory ammo for the brass and I have a feeling it won't see a box of shells a year!thanks again guys!yottey