Author Topic: Traditions Buckhunter  (Read 1335 times)

0 Members and 1 Guest are viewing this topic.

Offline tscott

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 561
Traditions Buckhunter
« on: July 07, 2005, 03:36:18 PM »
I picked up this inline new for 50 bucks tonight.. Included bullets, tools, etc. No instructions. Seems very similar to a basic CVA, that has been a terrific deer hunter for me, so I'm confident I can make it shoot. My plan is to get close with the enclosed lead bullets, and then a couple shots with powerbelts for a hunting load and then box it for hunting! Seem logical?
Also since it is #11 breech plug, I'm assuming I do not remove plug for cleaning, and proceed like it is a sidelock for cleaning purposes.
I have all sorts of projectiles including roundball, so if you guys have pet loads for this 1 in 32 let me know.... Thanks

Offline Stan M.

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 165
Traditions Buckhunter
« Reply #1 on: July 18, 2005, 03:17:10 PM »
I am not a big fan of Traditions or CVA, but you can probably call them for a manual or get one online. The rifle may serve you well. Some of those rifles do not have a removable breech plug, while some do. I would think the nipple should be removable, if the breech plug isn't. I would get a manual to read over it to be familiar with the rifle.
 I know one Traditions rifle the ramrod and jag would get stuck when cleaning and it took two men and a boy to get it out. I think he had the wrong jag after reading the manual.
 As far as a load, each rifle has it's own preference. I had good luck with 385 gr.  Buffalo bullets in a 1:32 twist New Englander. I used 90 gr. of black powder or Pyrodex P.
Good luck with your new rifle,
Stan

Offline jh45gun

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4992
Traditions Buckhunter
« Reply #2 on: July 19, 2005, 08:13:31 AM »
50 bucks sounds like you got a steal. I had  a traditions side hammer percussion and it shot great. It was a cheapy but shot excellent it was a 54 cal. I sold it when I built my 54 cal ball shooter with a green mountain barrel. Good luck with your new rifle sounds like you got a good deal.  HEck bullets and tools most starter kits cost 35 bucks or so. For 50 you did good. I would think most inlines would have a removable breech plug. Try finding their web site on line they may have manuals you can download for free..
Said I never had much use for one, never said I didn't know how to use it.

Offline tscott

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 561
Traditions Buckhunter
« Reply #3 on: July 22, 2005, 09:55:35 AM »
Hey thanks for the replies!!! I had the $49 rifle to the range, just to get it on paper with patched roundball... Pretty accurate with 80gr Pyro.
It has a #11 removable breech plug system, which I may replace with the 209 kit. Hey you know for a backup rifle when someone visits for a hunt,
don't think it would be a problem.
I found the ignition ok with the cap. Would it be beneficial if I went to the plastic cap holder. Does this really keep the cap secure on the nipple..?
Where can I buy?

Offline Stan M.

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 165
Traditions Buckhunter
« Reply #4 on: August 18, 2005, 04:35:24 PM »
Remington makes little pink rubber bands to help hold on percussion caps to the nipple. I never had a problem with the caps coming off. I pushed it on good with the priming tool. I did use the rubber rings a couple of times while hunting in the rain to help seal the cap from moisture. Don't know if it was necessary but it was just an extra precaution. I know what it is like to have a nice buck 25 yds. out and the rifle not go off. It was my fault nobody elses. That is another story.
Good luck,
Stan